Product Identification

Product Name

Perfluoropropionic anhydride

Synonyms

2,2,3,3,3-Pentafluoropropanoyl 2,2,3,3,3-pentafluoropropanoate
Propanoic acid, pentafluoro-, anhydride

CAS

356-42-3

Formula

C6F10O3

Molecular Weight

310.04000000000002

EINECS

206-604-2

Beilstein/Gmelin

1806446

Beilstein Reference

4-02-00-00741

Physical and Chemical Properties

Appearance

Colorless liquid.

Boiling Point

69

Density

1.571 g/cm3 (25 C)

Vapor Density

10.69

Refractive Index

1.277 (20 C)

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage

Store in a cool, dry place. Keep container closed when not in use. Corrosives area.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes.

Hazards Identification

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.

Inhalation

Causes chemical burns to the respiratory tract.

Skin

Causes skin burns.

Eyes

Causes eye burns.

EC Risk Phrase

R 34 37

EC Safety Phrase

S 23 26 36/37/39 45

UN (DOT)

3265

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Fire Fighting Measures

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Containers may explode when heated. Extinguishing media: Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong bases, strong oxidizing agents, water.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.

Transport Information

UN Number

3265