Product Identification

Product Name

2,3,4,5,6-Pentafluorobenzoyl chloride

Synonyms

2,3,4,5,6-Pentafluorobenzoic acid chloride
2,3,4,5,6-Pentafluorobenzoyl chloride
Pentafluorobenzoyl chloride

CAS

2251-50-5

Formula

C7ClF5O

Molecular Weight

230.52

EINECS

218-842-4

Beilstein/Gmelin

2054397

EC Class

corrosive

Physical and Chemical Properties

Appearance

Clear, colorless liquid.

Solubility in water

Insoluble

Boiling Point

158

Density

1.6 g/cm3

Vapor Density

7.95

Refractive Index

1.45 (20 C)

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage

Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Store protected from moisture.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Inhalation

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.

Skin

Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.

Eyes

Causes eye burns. Lachrymator. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.

Hazards

Contact with metals may evolve flammable hydrogen gas.

EC Risk Phrase

R 34

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

1760

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Effects may be delayed.

Fire Fighting Measures

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT get water inside containers. Cool containers with flooding quantities of water until well after fire is out. In case of fire, use carbon dioxide, dry chemical powder or appropriate foam.

Fire Potential

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Incompatibilities

Moisture, oxidizing agents, strong bases.

Stability

Stable under normal temperatures and pressures.

Decomposition

Hydrogen chloride, phosgene, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

1760

Hazard Class

8

Packing Group

I; II; III

HS Code

2916 39 00