Zinc acetate(557-34-6)
Product Identification
Product Name
Zinc acetate
Synonyms
Acetic acid, zinc salt
Dicarbomethoxyzinc
Galzin
Zinc di(acetate)
CAS
557-34-6
Formula
2C2H3O2Zn
Molecular Weight
183.48
EINECS
209-170-2
RTECS
AK1500000
RTECS Class
Mutagen; Reproductive Effector
Merck
12,10256
Beilstein/Gmelin
3563830
Beilstein Reference
4-02-00-00094
Physical and Chemical Properties
Appearance
Both are white crystalline solids.
Solubility in water
430 g/L
Boiling Point
908
Density
1.735 g/cm3 (20 C)
Usage
Preserving wood, as mordant in dyeing, manufacture glazes for painting on porcelain, as a reagent in testing for albumin, tannin, urobilin, phosphate, blood.
First Aid Measures
Ingestion
Induce vomiting, followed by prompt and complete gastric lavage, cathartics, and demulcents.
Inhalation
Move to fresh air; if exposure is severe, get medical attention.
Skin
Wash with soap and water.
Eyes
Flush with water for at least 10 min.; consult physician if irritation persists.
Handling and Storage
Storage
Do not store exposed to direct light. Do not allow moisture or water contamination of product. Store in closed containers in a dry, well-ventilated area.
Handling
Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed. Avoid creating and breathing dust. Use dustless systems for handling, storage, and clean up so that airborne dust does not exceed the PEL. Use adequate ventilation and dust collection. Practice good housekeeping.
Hazards Identification
Ingestion
Ingestion - zinc salts (especially zinc sulfate) produce gastritis ranging from a burning pain in the mouth and throat to intense gastric and substernal pain, strictures, violent vomiting, diarrhea, shock, and possible death.
Inhalation
Inhalation of material may be harmful.
Skin
Contact may cause burns.
Eyes
See Skin.
Hazards
Some may burn but none ignite readily. May polymerize explosively when heated or involved in a fire. Containers may explode when heated. Some may be transported hot.
UN (DOT)
9153
Accidental Release Measures
Small spills/leaks
Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. Water spill: Neutralize with agricultural lime (CaO), crushed limestone (CaCO3), or sodium bicarbonate (NaHCO3). Add soda ash (Na2CO3). Adjust pH to neutral (pH=7). Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.
ContactMore
- Tel
- 518-518-+86-188051
- Fax
- 051885110578
- WebSite
- http://www.kolodcn.com
- Tel
- 010-82848833
- Fax
- 86-10-82849933
- WebSite
- http://www.jkchemical.com
- Tel
- 021-61259108
- Fax
- 86-21-61259102
- WebSite
- https://www.meryer.com/cn/index/
- Tel
- 400-6106006
- Fax
- 021-67582001/03/05
- WebSite
- http://chemicals.thermofisher.cn
- Tel
- 010-89508211
- Fax
- 010-89508210
- WebSite
- http://www.hwrkchemical.com