Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 1-Ethyl-2-pyrrolidinone > 1-Ethyl-2-pyrrolidinone(2687-91-4)

1-Ethyl-2-pyrrolidinone(2687-91-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

1-Ethyl-2-pyrrolidinone

Synonyms

1-Ethyl-2-pyrrolidinone
1-Ethylpyrrolidin-2-one
N-Ethylpyrrolidinone
N-Ethylpyrrolidone

CAS

2687-91-4

Formula

C6H11NO

Molecular Weight

113.15

EINECS

220-250-6

RTECS

UY5769250

RTECS Class

Drug; Primary Irritant

Beilstein/Gmelin

107971

Beilstein Reference

5-21-06-00328

More
Less

Physical and Chemical Properties

Appearance

Clear very slight yellow liquid.

Boiling Point

97

Density

0.9979 g/cm3 (20 C)

Vapor Density

3.9

Refractive Index

1.4658 (20 C)

More
Less

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Inhalation

Causes respiratory tract irritation. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.

Skin

Causes skin irritation. May cause cyanosis of the extremities.

Eyes

Causes moderate eye irritation. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Prolonged or repeated skin contact may cause dermatitis. Effects may be delayed.

More
Less

Fire Fighting Measures

Flash Point

76

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

More
Less

Stability and Reactivity

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Incompatibilities

Strong acids, strong bases, strong oxidizing agents, acid chlorides.

Decomposition

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.

More
Less

ContactMore

NEM Materials Co.,Ltd.
Tel
393-393-+86-393-6101536
Fax
0393-6667671
Hefei TNJ Chemical Industry Co.,Ltd.
Tel
551-65418679
Fax
0551-65418697
WebSite
https://www.tnjchem.com
Shanghai Chengyu Biotechnology Co., Ltd.
Tel
021-51525055
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList31016/0.htm
JIANGSU BSECHEM CHEMICAL TECHNOLOGY Co., Ltd
WebSite
https://www.chemicalbook.com/supplier/25814564/
Nantong Zhonghe Chemical New Materials Co., Ltd
Tel
13003551299
WebSite
https://WWW.ntzhhg.com