Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Diethyl ethylmalonate > Diethyl ethylmalonate(133-13-1)

Diethyl ethylmalonate(133-13-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Diethyl ethylmalonate

Synonyms

Diethyl 2-ethylmalonate
Diethyl 2-ethylpropanedioate
Ethylpropanedioic acid diethyl ester
Malonic acid, ethyl-, diethyl ester
Propanedioic acid, ethyl-, diethyl ester

CAS

133-13-1

Formula

C9H16O4

Molecular Weight

188.23

EINECS

205-093-3

Beilstein/Gmelin

607635

Beilstein Reference

4-02-00-01953

More
Less

Physical and Chemical Properties

Appearance

Clear, colorless liquid.

Solubility in water

Slightly soluble

Melting Point

0

Boiling Point

212

Vapor Pressure

0.2 (25 C)

Density

1.0101 g/cm3 (14 C)

pKa/pKb

13.16 (pKa)

Partition Coefficient

1.58

Heat Of Vaporization

44.8

Vapor Density

6.5

Refractive Index

1.4166 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.

Inhalation

May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.

Skin

May cause skin irritation. The toxicological properties of this material have not been fully investigated.

Eyes

May cause eye irritation. The toxicological properties of this material have not been fully investigated.

EC Safety Phrase

S 24/25

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

More
Less

Fire Fighting Measures

Flash Point

88

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

More
Less

Stability and Reactivity

Disposal Code

1

Incompatibilities

Oxidizing agents.

Stability

Stable under normal temperatures and pressures.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

More
Less

Transport Information

HS Code

2917 19 90

More
Less

ContactMore

Shandong Yukun Chemical Industry Co. LTD
WebSite
https://www.yukunchem.com
Hubei Chenxin Pharmaceutical Co., Ltd.
Tel
17362916295
Fax
QQ:840947394
WebSite
http://www.chenxinyaoye.cn
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn