Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 1-Methylpyrrolidin-3-ol > 1-Methylpyrrolidin-3-ol(13220-33-2)

1-Methylpyrrolidin-3-ol(13220-33-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

1-Methylpyrrolidin-3-ol

Synonyms

1-Methyl-3-pyrrolidinol
3-Hydroxy-1-methylpyrrolidine
3-Hydroxy-N-methylpyrrolidine
N-Methyl-3-hydroxypyrrolidine
N-Methyl-3-pyrrolidinol

CAS

13220-33-2

Formula

C5H11NO

Molecular Weight

101.14

EINECS

236-189-3

Beilstein/Gmelin

1101

Beilstein Reference

5-21-01-00013

More
Less

Physical and Chemical Properties

Appearance

Yellow amber liquid.

Solubility in water

Very soluble

Boiling Point

50

Density

0.921 g/cm3

pKa/pKb

4.88 (pKb)

Vapor Density

3.49

Refractive Index

1.462 (25 C)

More
Less

First Aid Measures

Ingestion

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Inhalation

May cause respiratory tract irritation. Aspiration may lead to pulmonary edema. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.

Skin

Causes skin irritation. May cause irritation and dermatitis. May cause cyanosis of the extremities.

Eyes

Causes eye irritation. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Exposure Effects

Effects may be delayed.

More
Less

Fire Fighting Measures

Flash Point

70

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

More
Less

Stability and Reactivity

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Incompatibilities

Strong acids, strong oxidizing agents.

Decomposition

Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide.

More
Less

ContactMore

Nanjing XiLang Chemical Products Co., Ltd.
Tel
025-5276156
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList19187/0.htm
Anhui Dexinjia Biopharm Co., Ltd
Tel
0531-82375887
WebSite
http://www.ahdxj.com
Shanghai Lingfu Pharmaceutical Research Co. LTD
Tel
400-8675577
WebSite
https://www.chemany.com/
Watec Laboratories, Inc.
Fax
0519-85267382
WebSite
http://www.wateclaboratories.com
Shanghai Sagachem Co., Ltd.
WebSite
http://www.saga-chem.com