Ruthenium tetroxide Property

Melting point:

25.4°

Boiling point:

bp 40°

Density 

3.290

storage temp. 

Refrigerator (+4°C)

solubility 

slightly soluble in H2O; very soluble in ctc; reacEtOH

form 

Crystalline Powder

color 

White

Water Solubility 

2.03g/100mL H2O (20°C); very soluble CCl4, other chlorinated hydrocarbons [MER06] [KIR82]

Sensitive 

heat sensitive, store cold

crystal system

Monoclinic

Space group

C2/c

Lattice constant

a/nm	b/nm	c/nm	α/o	β/o	γ/o	V/nm3
0.9302	0.43967	0.8454	90	116.82	90	0.3086

Stability:

Stable.

CAS DataBase Reference

20427-56-9

Safety

Safety Statements 

16-17-36/37/39

RIDADR 

3139

HazardClass 

5.1

PackingGroup 

I

HS Code 

28439000

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H413May cause long lasting harmful effects to aquatic life

Precautionary statements

P273Avoid release to the environment.

P501Dispose of contents/container to..…

Ruthenium tetroxide Chemical Properties,Usage,Production

Chemical Properties

Ruthenium tetroxide is a golden-yellow volatile solid with an acrid odor, sparingly soluble in water and freely soluble in CCl4, in which it forms stable solutions. In comparison with the analogous compound OsO4, ruthenium tetroxide is a stronger oxidizing agent that reacts violently-resulting in explosion and/or flames-with most common organic solvents such as ether, alcohols, benzene, and pyridine, 1 and also with filter paper.

Ruthenium tetroxide is a clear orange to gold colored solution, It sublimes very easily at room temperature, possessing a melting point of 25.4℃ and a boiling point of 40℃ . While it is very soluble in CCl4 and other nonflammable organic solvents, a saturated solution in water at 20℃ reaches a concentration of 2% w/v.

Uses

Ruthenium tetroxide is an oxidizing agent similar to osmium tetroxide, but more difficult to handle. The solvents normally employed in OsO4 oxidations (ether, benzene, pyridine) cannot be used because of their violent reaction with RuO4. Only CCl4 is recommended.

Preparation

Ruthenium tetroxide can be conveniently handled as a carbon tetrachloride solution that is easily prepared by stirring an aqueous solution of sodium periodate NaIO4 with a suspension of hydrated ruthenium dioxide in CCl4. Ruthenium tetroxide partitions between CCl4 and water, resulting in a 60:1 concentration ratio.

Production Methods

Ruthenium(VIII) oxide (ruthenium tetraoxide) RuO4 is formed when an alkaline ruthenium solution is treated with a strong oxidant, such as chlorine, or bromate ion when the Ru is in acid solution.

Hazard

Fire risk in contact with organic materials.

Toxicity evaluation

Ruthenium tetroxide(RuO4) is a toxic and explosive compound, and, although it is less toxic than OsO4, it must be handled in a well ventilated fume hood using goggles and gloves. It can be destroyed with a sodium bisulfite solution, resulting in the much safer and less toxic ruthenium dioxide, which is a dark insoluble solid with very low vapor pressure.