Dichlorodifluoromethane Property

Melting point:

-158°C

Boiling point:

-29.79°C

Density 

1.329

vapor pressure 

4,306 at 20 °C (McConnell et al., 1975)

refractive index 

1.2850

Flash point:

11 °C

storage temp. 

-20°C

solubility 

Soluble in acetic acid, acetone, chloroform, ether (Weast, 1986), and ethanol (ITII, 1986)

form 

buffered aqueous glycerol solution

color 

Colorless gas with an ethereal odor

Water Solubility 

Insoluble. 0.028 g/100 mL

Henry's Law Constant

1.72, 2.63, and 3.91 at 10, 20, and 30 °C, respectively (Munz and Roberts, 1987)

Exposure limits

NIOSH REL: TWA 1,000 ppm (4,950 mg/m³), IDLH 15,000 ppm; OSHA PEL: TWA 1,000 ppm; ACGIH TLV: TWA 1,000 ppm (adopted).

Dielectric constant

2.4（21℃）

Stability:

Stable. Non-flammable. May react violently with aluminium.

InChIKey

PXBRQCKWGAHEHS-UHFFFAOYSA-N

LogP

2.160

CAS DataBase Reference

75-71-8(CAS DataBase Reference)

NIST Chemistry Reference

Dichlorodifluoromethane(75-71-8)

EPA Substance Registry System

CFC-12 (75-71-8)

Safety

Hazard Codes 

Xn;N,Xi,N,Xn,T,F

Risk Statements 

20-59-23/25-11-39/23/24/25-23/24/25-22

Safety Statements 

23-24/25-59-61-45-24-16-7-36/37

RIDADR 

1028

OEB

A

OEL

TWA: 1000 ppm (4950 mg/m3)

WGK Germany 

1

Hazard Note 

Irritant

DOT Classification

2.2 (Nonflammable gas)

HazardClass 

2.2

Hazardous Substances Data

75-71-8(Hazardous Substances Data)

Toxicity

LD₅₀ for rats >1 g/kg (quoted, Verschueren, 1983).

IDLA

15,000 ppm

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H370Causes damage to organs

H420Harms public health and the environment by destroying ozone in the upper atmosphere

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P311Call a POISON CENTER or doctor/physician.

Dichlorodifluoromethane Chemical Properties,Usage,Production

Description

Dichlorodifluoromethane is known as CFC-12, also called R-12, or Freon-12. R-12 is a general name for Refrigerant-12. Freon is a trade name for DuPont. CFC stands for chlorofl uorocarbons, which are nontoxic, nonfl ammable, synthetic chemicals containing atoms of carbon, chlorine, and fluorine.CFC use climbed steadily worldwide as it was incorporated in refrigeration and air conditioning, as well as being used as propellants, blowing agents, and solvents.

dichlorodifluoromethane structure

Chemical Properties

Dichlorodifluoromethane is a liquefied gas and exists as a liquid at room temperature when contained under its own vapor pressure, or as a gas when exposed to room temperature and atmospheric pressure. The liquid is practically odorless and colorless. The gas in high concentrations has a faint etherlike odor. Dichlorodifluoromethane is noncorrosive, nonirritating, and nonflammable. Ethereal odor at .20% by volume. Shipped as a compressed gas.
Dichlorotetrafluoroethane is a colorless, nonflammable liquefied gas with a faint, ethereal odor.
Trichloromonofluoromethane is a clear, volatile liquid at room temperature and atmospheric pressure. It has a characteristic carbon tetrachloride-like odor and is nonirritating and nonflammable.

History

CFCs were developed in the 1930s as coolants for refrigerator, freezer, and motor vehicle air conditioners.they subsequently found use as metal cleaners, degreasers, propellants, solvents, and blowing agents in the production of foams. CFCs have received widespread environmental attention because of their potential to deplete stratospheric ozone.

Uses

Refrigerant; aerosol propellant; plastics; blowing agent

Uses

Anti-GPR17 has been used in immunohistochemistry.

Uses

Refrigerant, aerosol propellant.
Dichlorodifluoromethane is used as a refrigerant gas in refrigerators and air conditioners.
Dichlorodifluoromethane is also used in aerosol sprays, in plastics, and as an aid in detecting leaks.
Dichlorodifluoromethane harms the ozone layer, which protects the earth from the sun’s ultraviolet radiation.

Production Methods

The basic chemistry on producing fluorinated organic compounds was discovered at the end of the 19th century.the Belgian chemist Frédéric Swarts (1866 1940) had produced CFC compounds in the 1890s. Swarts discovered that pentavalent antimony catalyzed the fluorination of chlorinated organic compounds. The synthesis of fl uorocarbon refrigerants was announced in April 1930. the Freon name was filed for in 1931 by DuPont and registered in 1932. Closely related compounds were introduced over the next several years: CFC-11 (1932), CFC- 114 (1933), and CFC-113 (1934).

Production Methods

Dichlorodifluoromethane is prepared by the reaction of hydrogen fluoride with carbon tetrachloride in the presence of a suitable catalyst, such as polyvalent antimony. The dichlorodifluoromethane formed is further purified to remove all traces of water and hydrochloric acid as well as traces of the starting and intermediate materials.
Trichloromonofluoromethane is also obtained by this process.
Dichlorotetrafluoroethane is prepared by the reaction of hydrogen fluoride with chlorine and perchloroethylene in the presence of a suitable catalyst such as polyvalent antimony.

General Description

A colorless gas having a faint ethereal odor. Shipped as a liquid confined under its own vapor pressure. Contact with the unconfined liquid can cause frostbite. Both components are noncombustible. Can asphyxiate by the displacement of air. Exposure of the closed container to prolonged heat or fire can cause Dichlorodifluoromethane to rupture violently and rocket.

Air & Water Reactions

The liquefied gas poured into water can be violently explosive. This is due to the phase transition from superheated liquid to vapor.

Reactivity Profile

The reaction of aluminum with various halogenated hydrocarbons produces a self-sustaining reaction with sufficient heat to melt aluminum pieces, examples of other halogenated hydrocarbons are fluorotrichloromethane, Dichlorodifluoromethane, chlorodifluoromethane, tetrafluoromethane. The vigor of the reaction appears to be dependent on the combined degree of fluorination and the vapor pressure, [Chem. Eng. News 39(27):44(1961)].

Health Hazard

INHALATION: some narcosis when 10% in air is breathed.

Pharmaceutical Applications

Dichlorodifluoromethane, dichlorotetrafluoroethane, and trichloromonofluoromethane are chlorofluorocarbon (CFC) aerosol propellants used in pharmaceutical formulations. They are no longer used in metered-dose inhaler (MDI) formulations, with few exceptions for existing MDIs.
Dichlorodifluoromethane is used as an aerosol propellant in MDIs, either as the sole propellant or in combination with dichlorotetrafluoroethane, trichloromonofluoromethane, or mixtures of these chlorofluorocarbons. Dichlorodifluoromethane may also be used as a propellant in an aerosolized sterile talc used for intrapleural administration and is also used alone in some MDIs containing a steroid.
Dichlorotetrafluoroethane is used in combination with dichlorodifluoromethane, and in several cases with dichlorodifluoromethane and trichloromonofluoromethane, as the propellant in metered-dose oral and nasal aerosols.
Trichloromonofluoromethane is used in combination with dichlorodifluoromethane as the propellant in metered-dose inhaler aerosols. It is also used in combination with dichlorotetrafluoroethane and dichlorodifluoromethane.
These three propellants have been blended to obtain suitable solubility characteristics for MDIs when formulated as solutions. They will produce suitable vapor pressures so that optimum particle-size distribution as well as suitable respiratory fractions may be achieved.
Blends of trichloromonofluoromethane and dichlorodifluoromethane (propellant 11/12) or propellant 11/114/12 produce vapor pressures of 103–484 kPa (15–70 psig) at 258℃, which adequately cover the range of pressures required to produce the proper particlesize distribution for satisfactory aerosol products. Trichloromonofluoromethane is unique among the chlorofluorocarbon propellants in that it is a liquid at room temperature and atmospheric pressure, and can be used to prepare a slurry with insoluble medicinal agents.

Biochem/physiol Actions

GPR17 acts as a reliable marker to identify an intermediate phase of OPC (oligodendrocyte precursor cells) differentiation. It plays a valuable role in remyelination after brain tissue damage. It also plays a complicated role in the modulation of oligodendrocyte maturation. Hence it is considered as an important regulator of oligodendrogenesis.

Safety Profile

Dichlorodifluoromethane is a colorless, non-flammable gas that can affect you when breathed in. Acute (short-term) exposure to dichlorodifluoromethane can cause dizziness, lightheadedness, and trouble with concentration. Exposure to high concentrations of the gas can cause the heart to beat irregularly or to stop. The health effects of chronic (long-term) exposure to dichlorodifluoromethane are unknown at this time. There is no evidence of an increase in cancer risk due to exposure to dichlorodifluoromethane.

Safety

Dichlorodifluoromethane, dichlorotetrafluoroethane, and trichloromonofluoromethane have been used for over 50 years as propellants in topical, oral, and nasal aerosol formulations, and are generally regarded as nontoxic and nonirritant materials when used as directed.
The propellants used for metered-dose inhalant aerosol products generally vaporize quickly and most of the vapors escape and are not inhaled. However, a small amount of the propellant may be inhaled with the active ingredient and be carried to the respiratory system. These amounts of propellant do not present a toxicological problem and are quickly cleared from the lungs. Deliberate inhalation of excessive quantities of fluorocarbon propellant may result in death, and the following ‘warning’ statements must appear on the label of all aerosols:
WARNING: Avoid inhalation. Keep away from eyes or other mucous membranes.
(Aerosols designed specifically for oral inhalation need not contain this statement).
WARNING: Do not inhale directly; deliberate inhalation of contents can cause death.
or
WARNING: Use only as directed; intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
Additionally, the label should contain the following information:
WARNING: Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at room temperature above 120°F (498℃). Keep out of the reach of children.
In the USA, the Environmental Protection Agency (EPA) additionally requires the following information on all aerosols containing chlorofluorocarbons as the propellant:
WARNING: Contains a chlorofluorocarbon that may harm the public health and environment by reducing ozone in the upper atmosphere.

Potential Exposure

Dichlorodifluoromethane is used as an aerosol propellant, refrigerant and foaming agent

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility.

Carcinogenicity

There was no evidence of carcinogenicity when groups of 50 male and 50 female rats were given oral doses of 15 or 150 mg/kg of CFC 12 daily for 2 years. As described above, there was no evidence of carcinogenicity when groups of 90 male and 90 female rats and of 60 male and 60 female mice were exposed by inhalation to levels of 1000 and 5000 ppm, 4 h/day, 5 days/ week.

Environmental Fate

Surface Water. Estimated half-lives of dichlorodifluoromethane from an experimental marine mesocosm during the spring (8–16 °C) and winter (3–7 °C) were 20 and 13 d, respectively (Wakeham et al., 1983).

storage

Chlorofluorocarbon propellants are nonreactive and stable at temperatures up to 5508℃. The liquefied gas is stable when used as a propellant and should be stored in a metal cylinder in a cool, dry place.

Shipping

UN1028 Dichlorodifluoromethane or Refrigerant gas R-12, Hazard class: 2.2; Labels: 2.2-Nonflammable compressed gas. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner

Purification Methods

Pass the gas through saturated aqueous KOH then conc H2SO4, and a tower packed with activated copper on Kielselguhr at 200o removed CO2 and O2. A trap cooled to -29o removed a trace of high boiling material. It is a non-flammable propellant.

Incompatibilities

The presence of greater than 5% water in solutions that contain trichloromonofluoromethane may lead to hydrolysis of the propellant and the formation of traces of hydrochloric acid, which may be irritant to the skin or cause corrosion of metallic canisters. Trichloromonofluoromethane may also react with aluminum, in the presence of ethanol, to cause corrosion within a cylinder with the formation of hydrogen gas. Similarly, alcohols in the presence of trace amounts of oxygen, peroxides, or other free-radical catalysts may react with trichloromonofluoromethane to form trace quantities of hydrochloric acid.
Both dichlorodifluoromethane and dichlorotetrafluoroethane are compatible with most ingredients used in pharmaceutical aerosols. Because of their poor miscibility with water, most MDIs are formulated as suspensions. However, solution MDIs can be prepared through the use of ethanol as a cosolvent for water and propellant, resulting in a clear solution (provided the water content is less than 5%).

Waste Disposal

Return refillable compressed gas cylinders to supplier. Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced. Because of potential ozone decomposition in the stratosphere, R-12 should be released to the atmosphere only as a last resort. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal

Regulatory Status

Included in the FDA Inactive Ingredients Database (aerosol formulations for inhalation, nasal, oral, and topical applications). With few exceptions for existing MDIs, the FDA and EPA have banned the use of CFCs in the USA after 31st December 2008, with all CFCs to be phased out by 2010–2015. Included in nonparenteral medicines licensed in the UK.