Azilsartan Property

Melting point:

188 °C(dec.)

Density 

1.42

storage temp. 

Sealed in dry,2-8°C

solubility 

DMSO: soluble15mg/mL (clear solution)

form 

powder

pka

2.05±0.10(Predicted)

color 

white to beige

InChIKey

KGSXMPPBFPAXLY-UHFFFAOYSA-N

Safety

WGK Germany 

3

HS Code 

2934.99.4400

Hazardous Substances Data

147403-03-0(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H361Suspected of damaging fertility or the unborn child

H413May cause long lasting harmful effects to aquatic life

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P308+P313IF exposed or concerned: Get medical advice/attention.

P405Store locked up.

P501Dispose of contents/container to..…

Azilsartan Chemical Properties,Usage,Production

Description

Edarbi (azilsartan medoxomil), a prodrug, is hydrolyzed to azilsartan in the gastrointestinal tract during absorption. Azilsartan is a selective AT1 subtype angiotensin II receptor antagonist. The drug substance used in the drug product formulation is the potassium salt of azilsartan medoxomil, also known by the US accepted name of azilsartan kamedoxomil and is chemically described as (5-Methyl-2-oxo-1,3-dioxol-4-yl)methyl 2-ethoxy-1-{[2'-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)biphenyl-4-yl]methyl}-1H-benzimidazole-7-carboxylate monopotassium salt.

Uses

Azilsartan and chlorthalidone combination is used to treat high blood pressure (hypertension). Azilsartan is an angiotensin II receptor blocker (ARB). It works by blocking a substance in the body that causes blood vessels to tighten. As a result, azilsartan relaxes the blood vessels. This lowers blood pressure and increases the supply of blood and oxygen to the heart.

Pharmacokinetics

Azilsartan differs structurally from candesartan only by replacement of candesartan’s five-membered tetrazole ring with a five-membered oxo-oxadiazole ring. Azilsartan is formulated as an ester prodrug, azilsartan medoxomil, which is rapidly hydrolysed to the bioactive molecule during gastrointestinal absorption. It produces dose-dependent reductions in vascular smooth muscle contraction, peripheral resistance, and the synthesis and effects of aldosterone on the kidneys. Azilsartan has a half-life of about 11 hours and is metabolized in the liver mainly via CYP2C9 and is eliminated in both the urine and feces.

Mechanism of Action

Edarbi, a prodrug, is hydrolyzed to azilsartan in the gastrointestinal tract during absorption. Azilsartan is a selective AT1 subtype angiotensin II receptor antagonist. Angiotensin II is formed from angiotensin I in a reaction catalyzed by angiotensin-converting enzymes (ACE, kinase II). Angiotensin II is the principal pressor agent of the renin-angiotensin system, with effects that include vasoconstriction, stimulation of synthesis and release of aldosterone, cardiac stimulation, and renal reabsorption of sodium. Azilsartan blocks the vasoconstrictor and aldosterone-secreting effects of angiotensin II by selectively blocking the binding of angiotensin II to the AT1 receptor in many tissues, such as vascular smooth muscle and the adrenal gland. Its action is, therefore, independent of the pathway for angiotensin II synthesis.

Biological Activity

Potent angiotensin II type 1 (AT1) receptor inverse agonist (IC50 = 2.6 nM at the human AT1 receptor). Inhibits angiotensin II-induced IP1 accumulation in COS-7 cells; decreases maximal contraction of rabbit aortic strips in a concentration-dependent manner (pD'2 = 9.9). Antihypertensive; prevents vascular cell proliferation and expression of PAI-1.

Side Effects

Overall, azilsartan is well-tolerated in most patients in terms of adverse effects. In a controlled, double-blind, randomized clinical trial comparing the efficacy of azilsartan medoxomil to the ACE inhibitor ramipril in 784 patients, the overall number of adverse events was reported to be much less frequent with azilsartan. During the treatment period, dizziness and hypotension occurred more often with the azilsartan treatment groups, and cough, a class side effect commonly encountered with ACE inhibitors, occurred more frequently with the ramipril group (8.2% of participants). Cough only occurred in 1% and 1.4% of azilsartan 40 and 80 mg groups, respectively. Another effect observed in the azilsartan group was a pertinent increase in serum potassium, sodium, and uric acid; no deaths resulted from this effect or the aforementioned adverse effects as well.

Description

Azilsartan is an antagonist of the angiotensin II type 1 receptor (AT₁; IC₅₀ = 0.42 μM) and the active metabolite of azilsartan medoxomil . Azilsartan is formed from azilsartan medoxomil by hydrolysis in the gastrointestinal tract and liver. Azilsartan also acts as an inverse agonist, inhibiting angiotensin II-induced accumulation of inositol-1-phosphate in COS-7 cells expressing recombinant human AT₁ (IC₅₀ = 2.6 nM). It reduces the maximal contractile response induced by angiotensin II in isolated rabbit aortic strips (pD₂ = 9.9). Azilsartan (100 ng/kg, i.v.) inhibits the angiotensin II-induced pressor response in conscious normotensive rats.

Chemical Properties

White to Off-White Solid

Uses

Azilsartan is an angiotensin II type 1 (AT1) receptor antagonist with IC50 of 2.6 nM

Uses

Azilsartan is an analgesic and antiinflammatory drugs containing angiotensin II antagonists.

Definition

ChEBI: A benzimidazolecarboxylic acid that is benzimidazole-7-carboxylic acid substituted at position 2 by a methoxy group and at position 1 by a 2'-[(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)biphenyl-4-yl]methyl group. Used (as the prodrug, azilsartan medoxomil) f r treatment of hypertension.

Clinical Use

Azilsartan is an orally active angiotensin II blocker which was approved and launched in Japan for the treatment of arterial hypertension in May 2012. Azilsartan, which is marketed under the trade name Azilva®, was discovered and developed by Takeda—the same firm which had developed and launched a prodrug of azilsartan (azilsartan kamedoxomil, Edarbi®) in 2010. Azilsartan exhibits higher potency and slower off-rate kinetics for type 1 angiotensin II receptors, which contributes to azilsartan’s comparatively improved blood pressure lowering effect.

Synthesis

The most likely process-scale synthetic route likely mimics that which is disclosed in Takeda?ˉs patents, and this is described in the scheme below. Commercial available benzoic acid 21 was activated as the correspndong acyl azide and underwent a Curtius rearrangement to give carbamate 22 in 57% yield (three steps from compound 21). The resulting aniline 22 was then alkylated with commercial 4- (bromomethyl)-2'-cyanobiphenyl 23 to give benzylamine 24 in 85% yield. Nitroamine 24 was then exposed to mildly acidic conditions to affect Boc-removal prior to reduction via ferric chloride hydrate in the presence of hydrazine hydrate. The resulting diamine 25 arose in 64% yield across the two-step sequence. Interestingly, tt was found that metal catalysts under conventional hydrogenation conditions caused partial debenzylation, which led the authors to arrive at the hydrazine/ferric chloride conditions. Next, benzimidazole formation was achieved upon treatment of diamine 25 with ethyl orthocarbonate in acetic acid. The resulting ethoxylbenzimidazole 26 was procured in 86% yield, and this benzonitrile was further reacted with hydroxylamine hydrochloride and sodium methoxide to provide amidoxime 27 in 90% as white powder. Next, activation with ethyl chlorocarbonate gave 28 followed by heating in refluxing xylene to give oxadiazolone 29 in 23% yield from hydroxyamidine 27. Finally ester 29 was saponified with 2N LiOH in methanol to give azilsartan (V) in 84% yield.



An improved scalable route (Scheme below) to azilsartan was reported and features reproducibly better yields.43 Hydroxyamidine 30 was treated with dimethyl carbonate and sodium methoxide, which triggered they key cyclization along with concomitant transesterification to deliver 29. Milder aqueous sodium hydroxide hydrolysis converted this methyl ester 29 to azilsartan (V) in 88-90% yield.