Trimethylsilyl trifluoromethanesulfonate Property

Melting point:

25°C

Boiling point:

77 °C/80 mmHg (lit.)

Density 

1.228 g/mL at 25 °C (lit.)

vapor pressure 

4.7 hPa (20 °C)

refractive index 

n20/D 1.36(lit.)

Flash point:

78 °F

storage temp. 

Store below +30°C.

solubility 

sol aliphatic and aromatic hydrocarbons, haloalkanes, ethers.

form 

Fuming Liquid

color 

Clear colorless to light brown

Specific Gravity

1.15

Water Solubility 

REACTS

Sensitive 

Moisture Sensitive

Hydrolytic Sensitivity

8: reacts rapidly with moisture, water, protic solvents

Merck 

14,9719

BRN 

1868911

InChIKey

FTVLMFQEYACZNP-UHFFFAOYSA-N

CAS DataBase Reference

27607-77-8(CAS DataBase Reference)

NIST Chemistry Reference

Trimethylsilyl trifluoromethanesulfonate(27607-77-8)

EPA Substance Registry System

Methanesulfonic acid, trifluoro-, trimethylsilyl ester (27607-77-8)

Safety

Hazard Codes 

C,F

Risk Statements 

10-14-34

Safety Statements 

16-26-36/37/39-45-8

RIDADR 

UN 2920 8/PG 2

WGK Germany 

3

F 

10-21

Autoignition Temperature

405 °C DIN 51794

Hazard Note 

Corrosive/Flammable

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29310095

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H226Flammable liquid and vapour

H314Causes severe skin burns and eye damage

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P240Ground/bond container and receiving equipment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Trimethylsilyl trifluoromethanesulfonate Chemical Properties,Usage,Production

Chemical Properties

clear colourless to light brown fuming liquid

Physical properties

bp 45–47 °C/17 mmHg, 39–40 °C/12 mmHg; d 1.225 g cm?3.

Uses

Trimethylsilyl Trifluoromethane sulfonate is generally used following reactions:
1. Silylation. TMSOTf is widely used in the conversion of car bonyl compounds to their enol ethers. The conversion is some 109 faster with TMSOTf/triethylamine than with chlorotrimethy lsilane.Dicarbonyl compounds are converted to the corresponding bis enol ethers; this method is an improvement over the previous two step method.In general, TMSOTf has a tendency toC-silylation which is seen most clearly in the reaction of esters, whereC-silylation dominates over O-silylation.
2.Carbonyl Activation. 1,3-Dioxolanation of conjugated enals is facilitated by TMSOTf in the presence of 1,2-bis(trimethylsilyl oxy)ethane. In particular, highly selective protection of sterically differentiated ketones is possible (eq 10).TMSOTf mediates a stereoselective aldol-type condensation of silyl enol ethers and acetals (or orthoesters). The nonbasic reaction conditions are extremely mild. The use of TMSOTf in aldol reactions of silyl enol ethers and ketene acetals with aldehydes is ubiquitous. Stereoselective cyclization of α,β-unsaturated enamide esters is induced by TMSOTf and has been used as a route to quinolizidines and indolizidines.
3.The often difficult conjugate addition of alkynyl organometallic reagents to enones is greatly facilitated by TMSOTf. In particular, alkynyl zinc reagents (normally unreactive with α,β-unsaturated carbonyl compounds) add in good yield.The formation of nitrones by reaction of aldehydes and ketones with N-methyl-N,O-bis(trimethylsilyl)hydroxylamine is accelerated when TMSOTf is used as a catalyst; the acceleration is particularly pronounced when the carbonyl group is under a strong electronic influence.5. Methyl glucopyranosides and glycopyranosyl chlorides undergo allylation with allylsilanes under TMSOTf catalysis to give predominantly α-allylated carbohydrate analogs.Glycosidation is a reaction of massive importance and wide spread employment. TMSOTf activates many selective glycosidation reactions.
4.O-Silylation. The formation of TMS ethers can be achieved by reacting the requisite alcohol with TMSOTf and an amine (triethy lamine, pyridine, or 2,6-lutidine) in dichloromethane;C-Silylation. Depending on the reaction conditions, sec ondary amides can be either C-silylated or N-silylated;N-Silylation. The N-bis-silylation of α-amino acids with TMSOTf is only effective for glycine; for other α-amino acids N-mono-silylation prevails because the larger size of the carbon chain at the α-position hinders bis-silylation;C,O-Bis-silylation. Bis-silylation ofα,β-unsaturated carbonyl compounds can be achieved by palladium-TMSOTf-catalyzed addition of disilanes to enones, enals, or aromatic aldehydes via an η3-silyloxyallylpalladium intermediate;Carbonyl Activation. TMSOTf frequently acts as a Lewis acid and it is able to activate several functional groups (the car bonyl group, the acetal unit, the nitrone moiety,…) thus facilitating different kinds of reactions;Acetal Activation. TMSOTf acts as a catalyst for the addi tion of several nucleophiles (allylsilanes, allylstannanes, silyl enol ethers, trimethylsilyl cyanide) towardN,O-acetals;Nitrone Activation. The nucleophilic addition to aldonitrones depends on the nature of the metal involved and the presence/absence of an activator;Epoxide Ring Opening. One-pot alkylation-O-silylation re actions of epoxides take place in excellent yields;Cleavage of Protecting Groups. THP ethers of primary, sec ondary, and phenolic alcohols can be conveniently deprotected at room temperature; Hypervalent Iodine Chemistry. The formation of hyperva lent iodine complexes is often promoted by TMSOTf.

Uses

Catalyst and silylating agent for organic syntheses.

Uses

Trimethylsilyl Trifluoromethanesulfonate is a trialkylsilyl triflate used as a catalyst in organic synthesis. Trimethylsilyl Trifluoromethanesulfonate is used in combination with boron trifluoride eth yl ether to prepare a Lewis acid that is more powerful than its components and especially effective in acetonitrile solvent. Trimethylsilyl is a common reagent used in a Dieckmann-like cyclization of ester-imides and diesters.

Synthesis

Trimethylsilyl trifluoromethanesulfonate is a frequent catalyzer or cationic initiator as a silylation reagent in organic synthesis; currently, the conventional preparation method has two kinds.
A kind of reaction is to prepare with tetramethylsilane by trifluoromethanesulfonic acid. However, tetramethylsilane in the preparation process often with a large amount of dimethylbutanes, dimethylchlorosilane, impurities such as dimethyl dichlorosilane (DMCS), above-mentioned impurity and trifluoromethanesulfonic acid is easy to occur side reaction, especially the trifluoromethanesulfonic acid dimethyl silicone grease that dimethylchlorosilane and trifluoromethanesulfonic acid generate and the boiling point of trimethylsilyl triflate are very approaching, be difficult to separate by the method for rectifying.
Another kind of preparation method is fluoroform sulphonate and silylation reagent reaction. This preparation method can obtain a purity of up to 99.9% Trimethylsilyl trifluoromethanesulfonate.