3-Methyl-3-buten-2-one Property

Melting point:

-54°C

Boiling point:

98°C

Density 

0,86 g/cm³

refractive index 

1.4210 to 1.4250

Flash point:

9°C

storage temp. 

Freezer

Water Solubility 

Slightly soluble in water

solubility 

Chloroform (Sparingly), Ethyl Acetate (Slightly), Methanol (Slightly)

form 

clear liquid

color 

Colorless to Light yellow

Odor

Very pungent; pleasant; sweet.

LogP

0.561 (est)

CAS DataBase Reference

814-78-8

NIST Chemistry Reference

3-Buten-2-one, 3-methyl-(814-78-8)

EPA Substance Registry System

3-Buten-2-one, 3-methyl- (814-78-8)

Safety

Hazard Codes 

F,T+

Risk Statements 

11-23/24/25-36/37/38-27-25

Safety Statements 

16-29-33-36/37/39-45-28-26

RIDADR 

1246

RTECS 

EN0175000

HazardClass 

3.1

PackingGroup 

II

HS Code 

29141900

Hazardous Substances Data

814-78-8(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H302Harmful if swallowed

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P270Do not eat, drink or smoke when using this product.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P312Call a POISON CENTER or doctor/physician if you feel unwell.

P330Rinse mouth.

P403+P233Store in a well-ventilated place. Keep container tightly closed.

3-Methyl-3-buten-2-one Chemical Properties,Usage,Production

Chemical Properties

Colorless or light yellow transparent liquid

Uses

Plastics.

Definition

ChEBI: 3-Methyl-3-buten-2-one is an olefinic compound. It is functionally related to an acrylic acid.

Production Methods

3-Methyl-3-buten-2-one is produced by acid-catalyzed condensation of 2-butanone with formaldehyde in the liquid phase. A further possibility is the methylolization of 2- butanone under alkaline conditions followed by elimination of water:

General Description

A clear colorless liquid. Flash point of 52°F. Denser than water and insoluble in water. Hence sinks in water. Vapors heavier than air.

Air & Water Reactions

Highly flammable. Insoluble in water.

Reactivity Profile

3-Methyl-3-buten-2-one tends to polymerize; this reaction is mostly suppressed by the inhibitor. Can polymerize if heated or contaminated. If confined in a container when polymerization is initiated, the container may violently rupture [USCG, 1999].

Hazard

Flammable, dangerous fire risk, explosivelimits in air 1.8–9.0%.

Health Hazard

Inhalation causes irritation of nose and throat. Liquid may cause severe damage to eyes, resulting possibly in some permanent impairment of vision; vapor produces tears. If not removed promptly from skin, liquid may cause delayed pain and blistering. Ingestion causes irritation of mouth and stomach.

Fire Hazard

Behavior in Fire: May polymerize and explode.

Chemical Reactivity

Reactivity with Water: No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Will polymerize in the absence of inhibitor, especially when heated; Inhibitor of Polymerization: Up to 1% hydroquinone.

Safety Profile

Poison by ingestion and skin contact. Moderately toxic by inhalation and intraperitoneal routes. A skin and severe eye irritant. A dangerous fire hazard when exposed to heat or flame. Explosive in the form of vapor when exposed to heat or flame. When heated to decomposition it emits acrid smoke and irritating fumes.