Benzyl butyl phthalate Property

Melting point:

<-35°C

Boiling point:

370°C

Density 

1.1 g/mL at 25 °C(lit.)

vapor density 

10.8 (vs air)

Pour Point 

-45

vapor pressure 

0.16 mm Hg ( 150 °C)

refractive index 

n20/D 1.54(lit.)

Flash point:

>230 °F

storage temp. 

room temp

solubility 

DMSO: 100 mg/mL (320.14 mM)

form 

Oily Liquid

Specific Gravity

1.1

color 

Clear

Water Solubility 

0.000269 g/100 mL

FreezingPoint 

-35℃

BRN 

2062204

Henry's Law Constant

(x 10^-6 atm?m³/mol): 1.3 at 25 °C (calculated, Howard, 1989)

InChIKey

IRIAEXORFWYRCZ-UHFFFAOYSA-N

LogP

4.84 at 20℃

CAS DataBase Reference

85-68-7(CAS DataBase Reference)

IARC

3 (Vol. Sup 7, 73) 1999

NIST Chemistry Reference

Phthalic acid, benzyl butyl ester(85-68-7)

EPA Substance Registry System

Butyl benzyl phthalate (85-68-7)

Safety

Hazard Codes 

T,N

Risk Statements 

61-50/53-62

Safety Statements 

53-45-60-61

RIDADR 

UN 3082 9/PG 3

WGK Germany 

2

RTECS 

TH9990000

Autoignition Temperature

450 °F

TSCA 

Yes

HazardClass 

9

PackingGroup 

III

HS Code 

29173400

Hazardous Substances Data

85-68-7(Hazardous Substances Data)

Toxicity

Acute oral LD₅₀ for guinea pigs 13,750 mg/kg, mice 4,170 mg/kg, rats 2,330 mg/kg (quoted, RTECS, 1985).

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P308+P313IF exposed or concerned: Get medical advice/attention.

P391Collect spillage. Hazardous to the aquatic environment

P405Store locked up.

Benzyl butyl phthalate Chemical Properties,Usage,Production

Description

Butyl benzyl phthalate is a clear, oily liquidwith a slight odor. Molecular weight = 312.39; Specificgravity (H2O:1): 1.1; Boiling point = 370; Freezing/Melting point 5 2 34.7C; Relative vapor density (air = 1):10.8; Vapor pressure = very low; Flash point =199℃;Autoignition temperature =422℃. Hazard Identification(based on NFPA-704 M Rating System): Health 1,Flammability 1, Reactivity 0. Practically insoluble in water.

Chemical Properties

Benzyl butyl phthalate is a clear, oily liquid with a slight odor.

Uses

Benzyl n-butyl phthalate is used as a plasticizer for vinyl foams. It is also used in floor tiles, in traffic cones, food conveyor belts and artificial leather. Further, it acts as an organic intermediate. In addition to this, it is used as a perfume fixative.

Uses

A phthalate metabolite with genotoxic effect.

Definition

ChEBI: Butylbenzyl phthalate is a benzyl ester.

Production Methods

BBP is manufactured by the sequential addition of butanol and benzyl chloride to phthalic anhydride. It is used as a plasticizer for polyvinyl chloride plastics, particularly vinyl floor tile, vinyl leather, and cloth coating.

General Description

A clear colorless liquid with a mild odor. Primary hazard is to the environment. Immediate steps should be taken to limit spread to the environment. Easily penetrates the soil to contaminate groundwater and nearby waterways.

Air & Water Reactions

Slightly soluble in water and slightly denser than water.

Reactivity Profile

Benzyl butyl phthalate is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Can generate electrostatic charges. [Handling Chemicals Safely 1980. p. 250].

Health Hazard

Prolonged contact with liquid causes some irritation of eyes and skin.

Health Hazard

The acute oral toxicity of this compoundis low. It is, however, more toxic, thanthe phthalic acid dialkyl esters. The toxic symptomsinclude nausea, dizziness, somnolence, andhallucination. The oral LD50 value in mice iswithin the range of 4200 mg/kg. Oral admin istration produced reproductive toxicity inmale mice (paternal effects). At a dose of2% in diet, it caused maternal and develop mental toxicity and an increased incidence.

Fire Hazard

Special Hazards of Combustion Products: Irritating vapors of unburned chemical may form in fires.

Potential Exposure

Benzyl butyl phthalate is used as a plasticizer for polyvinyl and cellulosic resins. It is also used as an organic intermediate. Incompatibilities: Incompatible with strong acids; nitrates, oxidizers. Destructive to rubber and paint.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for20
30 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure, beginrescue breathing (using universal precautions, includingresuscitation mask) if breathing has stopped and CPR if heartaction has stopped. Transfer promptly to a medical facility.When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Donot make an unconscious person vomit

Carcinogenicity

The NTP examined the carcinogenicity of BBP in rats and mice. Groups of 50 male and female rats and mice were exposed to BBP via the diet at levels of 0, 6000, or 12,000 ppm (0, 300, and 600 mg/kg for rats and 0, 780, or 1560 mg/kg for mice). Male and female mice and female rats were exposed for 103 weeks. Due to poor survival, all males were sacrificed at weeks 29–30; this part of the study was later repeated. No treatmentrelated neoplasms were observed in mice. Survival was not affected. A dose-dependent reduction in body weight in both sexes was the only treatment-related effect observed in this study. Furthermore, nonneoplastic changes were all within the normal limits of incidence for B6C3F1 mice. The NTP concluded that under the conditions of the bioassay, BBP “was not carcinogenic for B6C3F1 mice of either sex.” An increased incidence of mononuclear cell leukemias was observed in the high-dose female rats. No other treatmentrelated findings were observed. The NTP concluded that BBP was “probably carcinogenic for female F344/N rats, causing an increased incidence of mononuclear cell leukemias”. The biological significance of this finding is uncertain as the background incidence of this tumor type in F344 rats is quite high.

Source

Detected in distilled water-soluble fractions of new and used motor oil at concentrations of 8.6–13 and 14–17 μg/L, respectively (Chen et al., 1994)

Environmental Fate

Biological. In anaerobic sludge diluted to 10%, benzyl butyl phthalate biodegraded to monobutyl phthalate, which subsequently degraded to phthalic acid. After 40 d, >90% of applied amount degraded (Shelton et al., 1984). When benzyl butyl phthalate (5 and 10 mg/L) was statically incubated in the dark at 25 °C with yeast extract and settled domestic wastewater inoculum, complete biodegradation with rapid adaptation was observed after 7 d (Tabak et al., 1981). In activated sludge, the half-life was 2 h (Saeger and Tucker, 1976). Gledhill et al. (1980) reported half-lives of 2 and <4 d for benzyl butyl phthalate in river water and a lake water microcosm, respectively. Aerobic degradation of benzyl butyl phthalate by acclimated soil and activated sewage sludge microbes was studied using an acclimated shake flask CO2 evolution test. After 28 d, loss of benzyl butyl phthalate (primary degradation) was 43%, with a lag phase of 15.6 d, and ultimate biodegradation (CO2 evolution) was 43%. The half-life under these conditions was 19.4 d (Sugatt et al., 1984).
Surface Water. The biological half-life of benzyl butyl phthalate in river water was determined to be 2 d (Saeger and Tucker, 1976).
Photolytic. Gledhill et al. (1980) reported the photolytic half-life is >100 d.
Chemical/Physical. Benzyl butyl phthalate initially hydrolyzes to butyl hydrogen phthalate. This compound undergoes additional hydrolysis yielding o-phthalic acid, 1-butanol, and benzyl alcohol (Kollig, 1993). Gledhill et al. (1980) reported the hydrolysis half-life is >100 d.

Solubility in organics

4.05 (Veith et al., 1980)
4.73 (Ellington and Floyd, 1996)
4.80 (Hirzy et al., 1978)
4.91 at 20 °C (shake flask-UV spectrophotometry, Leyder and Boulanger, 1983)
4.77 (shake flask-GC, Gledhill et al., 1980)

storage

Color Code—Green: General storage may be used.Prior to working with this chemical you should be trained onits proper handling and storage. Store in tightly closed containers in a cool, dry place, or refrigerator away from incompatible materials listed above. Metal containers involving thetransfer of this chemical should be grounded and bonded.Drums must be equipped with self-closing valves, pressurevacuum bungs, and flame arresters. Use only nonsparkingtools and equipment, especially when opening and closingcontainers of this chemical. Sources of ignition, such assmoking and open flames, are prohibited where this chemicalis used, handled, or stored in a manner that could create apotential fire or explosion hazard. A regulated, marked areashould be established where this chemical is handled, used,or stored in compliance with OSHA Standard 1910.1045.

Shipping

UN3082 Environmentally hazardous substances, liquid, n.o.s., Hazard class: 9; Labels: 9—Miscellaneous hazardous material, Technical Name Required

Incompatibilities

Incompatible with strong acids, nitrates,oxidizers. Destructive to rubber and paint.

Waste Disposal

Atomize into an incinerator together with a flammable solvent.