Butyl methacrylate Property

Melting point:

-75 °C

Boiling point:

162-165 °C (lit.)

Density 

0.894 g/mL at 25 °C (lit.)

vapor density 

4.91 (15 °C, vs air)

vapor pressure 

2 mm Hg ( 20 °C)

refractive index 

n20/D 1.423(lit.)

Flash point:

123 °F

storage temp. 

Store below +30°C.

solubility 

0.36g/l

form 

Liquid

color 

Clear

Odor

Moderate acrylate.

explosive limit

2.00-8.00%(V)

Water Solubility 

3 g/L (20 ºC)

BRN 

773960

Exposure limits

ACGIH: TWA 5 mg/m3
NIOSH: TWA 5 mg/m3

Stability:

Stable (though if no stabilizers are present, it may polymerize; typically stabilized through the addition of HQME). Incompatible with strong reducing agents, strong oxidizing agents. Flammable. Water-reactive at high or low pH.

InChIKey

SOGAXMICEFXMKE-UHFFFAOYSA-N

LogP

3 at 25℃

CAS DataBase Reference

97-88-1(CAS DataBase Reference)

NIST Chemistry Reference

Butyl methacrylate(97-88-1)

EPA Substance Registry System

Butyl methacrylate (97-88-1)

Safety

Hazard Codes 

Xi

Risk Statements 

10-36/37/38-43

Safety Statements 

16-36/37/39-26

RIDADR 

UN 2227 3/PG 3

WGK Germany 

1

RTECS 

OZ3675000

Autoignition Temperature

562 °F

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29161490

Hazardous Substances Data

97-88-1(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: > 2000 mg/kg LD50 dermal Rabbit > 2000 mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H226Flammable liquid and vapour

H315Causes skin irritation

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P240Ground/bond container and receiving equipment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Butyl methacrylate Chemical Properties,Usage,Production

Description

Butyl methacrylate (BMA) is the organic compound with the formula C4H9O2CC(CH3)=CH2. A colorless liquid, it is a common monomer for the preparation of methacrylate polymers. It is typically polymerized under free-radical conditions.
Butyl methacrylate is a versatile, plasticizing methacrylate monomer that acts as an important building block in many copolymer compositions. Serving as a base for acrylic resins, BMA provides exceptional weather resistance, high gloss, color retention, and durability. BMA contributes more intermediate glass transition and hardness values, with a glass transition temperature (Tg) of 20 °C.

Chemical Properties

clear colourless liquid with an ester-like odour

Chemical Properties

Butyl methacrylate is a flammable, colorless liquid with a mild odor.

Uses

Monomer for resins, solvent coatings, adhe- sives, oil additives; emulsions for textiles, leather, and paper finishing.

Uses

n-Butyl methacrylate is used as a monomer for resins, solvent coatings, adhesives, oil additives, emulsions for textiles, leather, and paper finishing and in the manufacture of contact lenses . It is also used in dental resins, oil dispersible pesticides, and acrylic surface coatings and as copolymers, for example, in paraffin embedding media .

Uses

manufacture of methacrylic resins, solvent coatings, adhesives, oil additives; emulsions for textiles, leather and paper finishing; cross-linking methacrylic monomer for use in dental composite materials, artificial nails, etc.

Production Methods

n-Butyl methacrylate is produced by the reaction of methacrylic acid or methyl methacrylate with butanol .

Definition

ChEBI: Butylmethacrylate is an enoate ester.

General Description

A clear colorless liquid. Flash point 130°F. Less dense (7.5 lb / gal) than water and insoluble in water. Hence floats on water. Vapors heavier than air. Used to make resins adhesives, and oil additives.

Air & Water Reactions

Flammable. Sensitive to moisture. Insoluble in water.

Reactivity Profile

Butyl methacrylate reacts exothermically with acids. Reacts with oxidizing agents. Strong oxidizing acids may cause a reaction that is sufficiently exothermic to ignite the reaction products. Heat is generated with caustic solutions. Generates flammable hydrogen with alkali metals and hydrides. Polymerizes easily .

Hazard

Toxic by ingestion. Moderate fire risk.

Health Hazard

Inhalation may cause nausea because of offensive odor. Contact with liquid causes irritation of eyes and mild irritation of skin. Ingestion causes irritation of mouth and stomach.

Fire Hazard

Behavior in Fire: Containers may explode due to polymerization.

Chemical Reactivity

Reactivity with Water No reaction; Reactivity with Common Materials: No reactions; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: May occur upon exposure to heat; Inhibitor of Polymerization: 9-15 ppm monomethyl ether of hydroquinone; 90-120 ppm hydroquinone.

Safety Profile

Moderately toxic by intraperitoneal route. Mddly toxic by ingestion, inhalation, and skin contact. An experimental teratogen. Experimental reproductive effects. A skin irritant. Flammable liquid when exposed to heat or flame. Explosive in the form of vapor when exposed to heat or flame. Violent polymerization can be caused by heat, moisture, oxidizers. To fight fire, use foam, dry chemical, CO2. When heated to decomposition it emits acrid smoke and irritating fumes.

Potential Exposure

Forms an explosive mixture with air. Unless inhibitor is maintained at the proper level, oxidizers, heat, ultraviolet light, contamination, or moisture may cause polymerization. May accumulate static electrical charges and cause ignition of its vapors.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. Medical observation is recommendedfor 24
48 h after breathing overexposure, as pulmonaryedema may be delayed. As first aid for pulmonary edema,a doctor or authorized paramedic may consider administering a corticosteroid spray

storage

Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Protect against physical damage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Outsideor detached storage is preferred. Prior to working with butylmethacrylate you should be trained on its proper handlingand storage. Store in tightly closed containers in a cool,well-ventilated area away from incompatible materialslisted above and from light and heat. Butyl methacrylateshould be kept refrigerated and inhibited with 10-ppmhydroquinone monomethylether. Metal containers involvingthe transfer of this chemical should be grounded andbonded. Drums must be equipped with self-closing valves,pressure vacuum bungs, and flame arresters. Use only nonsparking tools and equipment, especially when opening andclosing containers of this chemical. Sources of ignition,such as smoking and open flames, are prohibited where thischemical is used, handled, or stored in a manner that couldcreate a potential fire or explosion hazard.

Shipping

UN2227 Butyl methacrylate, stabilized, Hazard Class: 3; Labels: 3—Flammable liquid.

Purification Methods

Purify as for butyl acrylate. [Beilstein 2 IV 1525.]

Incompatibilities

Forms an explosive mixture with air. Unless inhibitor is maintained at the proper level, oxidizers, heat, ultraviolet light, contamination, or moisture may cause polymerization. May accumulate static electrical charges and cause ignition of its vapors

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.