TRIPROLIDINE HYDROCHLORIDE Property

Melting point:

116-118 °C

storage temp. 

2-8°C

solubility 

Chloroform (Slightly), Dichloromethane (Slightly), Water (Slightly)

form 

Powder

Water Solubility 

Soluble to 100 mM in water

Stability:

Hygroscopic

CAS DataBase Reference

550-70-9(CAS DataBase Reference)

EPA Substance Registry System

Pyridine, 2-[(1E)-1-(4-methylphenyl)-3-(1-pyrrolidinyl)-1-propenyl]-, monohydrochloride (550-70-9)

Safety

Hazard Codes 

Xn

Risk Statements 

22-36/37/38

Safety Statements 

26-36

RIDADR 

3249

WGK Germany 

3

RTECS 

UT7658000

HazardClass 

6.1(b)

PackingGroup 

III

Toxicity

LD50 oral in rat: 840mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H302Harmful if swallowed

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P321Specific treatment (see … on this label).

P330Rinse mouth.

P332+P313IF SKIN irritation occurs: Get medical advice/attention.

P362Take off contaminated clothing and wash before reuse.

P501Dispose of contents/container to..…

TRIPROLIDINE HYDROCHLORIDE Chemical Properties,Usage,Production

Originator

Actidil,Burroughs-Wellcome,US,1958

Uses

trans-Triprolidine Hydrochloride is a histamine H1 receptor antagonist, which can be used for the prevention of treatment of chronic muscle pain.

Uses

Triprolidine is an antihistaminic agent with anticholinergic properties. Triprolidine is used to treat and prevent symptoms associated with allergies. Triprolidine is also used in combination with cold medicine to provide relief for flu-like symptoms.

Uses

Antihistaminic;H1 antagonist

Definition

ChEBI: A hydrochloride resulting from the formal reaction of equimolar amounts of triprolidine and hydrogen chloride. Its monohydrate is used for the symptomatic relief of uticaria, rhinitis, and various pruritic skin disorders.

Manufacturing Process

4-Methylacetophenone is first reacted with paraformaldehyde and then with pyrrolidine to give p-methyl-ω-pyrralidinopropiophenone. Atomized lithium (26 g, 3.75 mols) and sodium-dried ether (200 cc) are placed in a 3-liter, 3-necked flask fitted with a Herschberg stirrer, thermometer pocket and a water condenser closed by a calcium chloride tube. A slow stream of dry nitrogen is blown through the flask, which is cooled to - 10°C and n-butyl chloride (138 g, 156 cc, 1.5 mols) is run in with rapid stirring; the mixture is stirred for a further 30 minutes, and then cooled to - 60°C
2-Bromopyridine (193 g, 1.22 mols) is then added dropwise over 20 minutes, the temperature of the reaction mixture being maintained at -50°C. The mixture is stirred for 10 minutes at -50°C and p-methyl-ω- pyrrolidinopropiophenone (112.5 g, 0.5 mol) in dry benzene is then added dropwise over ca 30 minutes, at a temperature of -50°C. The mixture is stirred for a further 2 hours, the temperature being allowed to rise to -30°C but no higher.
The mixture is poured onto excess ice, acidified with concentrated hydrochloric acid, the ether layer separated and extracted with water (1 x 200 cc). The combined aqueous extracts are washed with ether (1 x 200 cc) basified with 0.880 ammonia and extracted with chloroform (3 x 350 cc); the extract is washed with water (2 x 100 cc), dried over sodium sulfate, evaporated, and the residue extracted with boiling light petroleum (BP 60° to 80°C; 10 volumes), filtered hot and evaporated to dryness. The residue is recrystallized from alcohol to give a cream solid (119 g, 80%), MP 117° to 118°C. Recrystallization gives 1-(4-methylphenyl)-1-(2-pyridyl)-3- pyrrolidonopropan-1-ol, MP 119° to 120°C.
1-(4-Methylphenyl)-1-(2-pyridyl)-3-pyrrolidinopropan-1-ol (10.0 g) is heated in a steam bath for 30 minutes with 85% aqueous sulfuric acid (30 cc). The solution is then poured onto crushed ice, excess of ammonia solution added and the liberated oil extracted with light petroleum (BP 60° to 80°C). The extract is dried over anhydrous sodium sulfate and the solvent evaporated to leave an amber syrup (8.8 g) consisting of the cis and trans isomers of 1-(4- methylphenyl)-1-(2-pyridyl)-3-pyrrolidinoprop-1-ene as described in US Patent 2,712,023. The isomers may be separated by base exchange chromatography. The 4-methyl-ω-pyrrolidinopropiophenone required as the starting product for the preparation of the carbinol is prepared by the Mannich reaction (Blicke, Organic Reactions, 1942, vol 1, p 303; Adamson & Billinghurst, Journal of the Chemical Society, 1950,1039) from 4-methylacetophenone and pyrrolidine. The hydrochloride has a MP of 170°C with decomposition.

brand name

Actidil (GlaxoSmithKline); Myidyl (USl).

Therapeutic Function

Antihistaminic