2-Methyl-2,4-pentanediol Property

Melting point:

-40 °C (lit.)

Boiling point:

197 °C (lit.)

Density 

0.925 g/mL at 25 °C (lit.)

vapor density 

4.1 (vs air)

vapor pressure 

0.02 mm Hg ( 20 °C)

refractive index 

n20/D 1.427(lit.)

Flash point:

201 °F

storage temp. 

Store below +30°C.

solubility 

H₂O: 1 M at 20 °C, clear, colorless

form 

Slightly Viscous Liquid

pka

15.10±0.29(Predicted)

color 

Clear

PH

6-8 (25℃, 1M in H2O)

Odor

Ammonia-like.

explosive limit

1-9.9%(V)

Water Solubility 

soluble

Sensitive 

Hygroscopic

λmax

λ: 260 nm Amax: 0.01
λ: 280 nm Amax: 0.01

Merck 

14,4710

BRN 

1098298

Dielectric constant

24.399999999999999

Exposure limits

ACGIH: TWA 25 ppm; STEL 50 ppm(10 mg/m3)
NIOSH: Ceiling 25 ppm(125 mg/m3)

Stability:

Stable. Incompatible with strong oxidizing agents, strong acids, strong reducing agents.

InChIKey

SVTBMSDMJJWYQN-UHFFFAOYSA-N

LogP

0 at 20℃

CAS DataBase Reference

107-41-5(CAS DataBase Reference)

NIST Chemistry Reference

2,4-Pentanediol, 2-methyl-(107-41-5)

EPA Substance Registry System

Hexylene glycol (107-41-5)

Safety

Hazard Codes 

Xi

Risk Statements 

36/38

Safety Statements 

26-36

WGK Germany 

1

RTECS 

SA0810000

F 

3-23

Autoignition Temperature

425 °C DIN 51794

TSCA 

Yes

HS Code 

29053910

Hazardous Substances Data

107-41-5(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 4.70 g/kg (Smyth, Carpenter)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P308+P313IF exposed or concerned: Get medical advice/attention.

2-Methyl-2,4-pentanediol Chemical Properties,Usage,Production

Description

2-Methyl-2,4-pentanediol (MPD) is a diol organic compound with a chiral carbon atom. It is a colorless liquid at room temperature and can be Diacetone alcohol is hydrogenated. The appearance is colorless liquid with mild sweetness. It is miscible with water, soluble in ethanol, and soluble in most organic solvents.

Uses

2-Methyl-2,4-pentanediol (MPD) is a fine chemical product with a wide range of uses, which can be used in pesticides, biochemical engineering, photosensitive materials, synthetic fragrances and other fields. 2-Methyl-2,4-pentanediol is a highly soluble high-grade organic solvent. It can be used as an additive in the production of metal surface treatment agents for rust and oil removal. It can also be used as a textile auxiliaries, as well as coatings and latex paints. It can also be used in cosmetics, as a pesticide stabilizer, but also as a daily chemical moisturizer, flavor and fragrance raw materials, hydraulic oil, high-temperature lubricating oil, brake oil, dry cleaning agent, printing ink, pigment dispersant, wood preservative etc. As penetrant, emulsifier and antifreeze.

Preparation

Using 2000 L of diacetone alcohol as a raw material to synthesize isohexanediol by hydrogenation reduction, the specific process steps are:Step 1: Start the vacuum pump to vacuum the raw material metering tank. When the vacuum is greater than -0.06Mpa, close the exhaust valve, open the feed valve, mix 2000 L of diacetone alcohol raw material and 200ppm sodium bicarbonate and pump it in Raw material metering tank.Step 2: Open the vacuum valve on the reduction pot and pump the reduction pot to a vacuum of -0.1Mpa, then open the feed valve on the reduction pot, and add 2000 L of diacetone alcohol raw material and 200ppm sodium bicarbonate from the metering tank To the reduction pot, start the mixer to stir at the same time, add 95Kg of Raney nickel catalyst.Step 3: Close the vacuum valve, open the nitrogen inlet valve, and inject nitrogen into the reduction pot. After the pressure in the pot is increased to 0.6Mpa within 3 to 5 minutes, close the hydrogen inlet valve, open the vent valve, and reduce the pressure in the pot. Reduce to normal pressure, repeat the above steps, re-inject nitrogen for replacement, and repeat this five times.Step 4: When the nitrogen replacement in the third step is completed, close the vent valve, open the hydrogen inlet valve, and inject hydrogen into the reduction pot within 10-15 minutes. When the pressure in the pot reaches 0.6Mpa, close the hydrogen inlet valve. Open the vent valve, after the pressure in the pot drops to normal pressure, close the vent valve, repeat the above steps, re-inject hydrogen for replacement, and repeat this five times.Step 5: After the hydrogen replacement, close the vent valve, open the hydrogen gas inlet valve, and inject hydrogen into the reduction pot. Use hydrogen to make the pressure in the pot reach 1.9Mpa within 15 to 30 minutes, then close the hydrogen gas inlet valve and open it. Jacketed steam valve, raise the temperature in the pot to 150°C, and adjust the stirring speed to 310r/min. At this time, open the hydrogen gas inlet valve and control the temperature in the pot at 150°C. On the basis of the stable temperature in the pot, Keep the hydrogen vapor pressure at 1.9Mpa for 4 hours, then close the hydrogen gas inlet valve and accurately record the current pressure in the boiler. After 30 minutes, take a sample for gas chromatographic testing. If the raw material content is less than 1% in the test result, it is qualified. At this time, Close the jacketed steam valve and open the jacketed cooling water to reduce the temperature in the pot to normal temperature. Then, open the vent valve to reduce the pressure in the pot to normal pressure.Step 6: Stop the mixer and let it stand for 50 minutes, close the vent valve, open the nitrogen inlet valve, use nitrogen to increase the pressure in the pot to 0.6Mpa, close the nitrogen valve, open the empty valve, and slowly reduce the pressure in the pot to normal pressure , And then repeat this step 5 times.Step 7: Open the nitrogen valve and the feed valve of the distillation pot at the same time. Use 0.8Mpa nitrogen to send the qualified materials to the filter for filtration. The filtered materials are pumped into the crude isohexanediol storage tank, and then pressed to the distillation Distillation is carried out in the kettle, and the filtered catalyst is recycled; the finished product from the rectification is isohexanediol. After the raw material of 2000 L diacetone alcohol is hydrogenated and reduced to synthesize, 1865Kg of isohexanediol product is obtained with a purity of 99.5%. The mass yield is 99%. After cooling, it is placed in the isohexanediol product storage tank. The remaining by-products are mainly 29kg of 98% acetone, which can be sold as industrial acetone.

Description

Hexylene glycol is a colorless liquid with amild, sweet odor. The odor threshold is 50 ppm. Molecularweight= 1 18.20; Specific gravity (H20:1) = 0.92; Boilingpoint = 197.8℃; FreezingMelting point= - 50℃ (sets toglass); Vapor pressure = 0.05 mmHg at 20℃;Flashpoint = 98.3℃; Autoignition temperature = 260℃; 306℃.Explosive limits: LEL= 1.3%; UEL= 7.4%.. HazardIdentification (basedon NFPA-704 M Rating System):Health 2, Flammability 1, Reactivity 0. Soluble in water.

Chemical Properties

Hexylene Glycol is an oily colorless liquid with a mild sweet odor. It is an oxygenated solvent derived from acetone which has two alcohol functions. It has a low evaporation rate and it is completely miscible with water.

Uses

hexylene glycol could be considered a solubilizer.

Uses

Fuel and lubricant additive; solvent in cosmetics; solvent in petroleum refining; coupling agent in hydraulic brake fluid and printing inks; gasoline anti-icer additive

Uses

(^+)-2-Methyl-2,4-pentanediol is used to control the flow properties of industrial products such as paints, coatings, cleansers, solvents, and hydraulic fluids. It acts as a thickening agent in cosmetic products. It serves as a coupling agent and an additive to hydraulic fluids, inks and cement. It is also employed as a blood volume expander. Further, it is used as a solvent for cleaning and colorant products. In addition to this, it is used in laboratory studies as a precipitant and cryoprotectant in protein crystallography.

Uses

1. Hexylene Glycol is used as a reagent in the synthesis of functionalized boronic esters. it is used in laboratory studies as a precipitant and cryoprotectant in protein crystallography.
2. Also used in the preparation of vinylboronates.
3. It is mainly used as a coupling agent and an additive to hydraulic fluids, inks and cement. Further, it is used as a solvent for cleaning and colorant products.
4. It is a potential substitute for glycol ethers.
5. It is an effective shrinkage reduction admixture or SRA for concrete and mortar.
6. It can also be used as a building block in chemical synthesis.
7. Hexylene glycol is a key solvent in many markets such as paints & coatings, metal working fluids, detergency, cosmetics & fragrances, textiles & leather.It is used to control the flow properties of industrial products such as paints, coatings, cleansers, solvents, and hydraulic fluids. It acts as a thickening agent in cosmetic products.
8. It is also employed as a blood volume expander.

Definition

ChEBI: A glycol in which the two hydroxy groups are at positions 2 and 4 of 2-methylpentane (isopentane).

Production Methods

2-Methyl-2,4-pentanediol is prepared commercially by the catalytic hydrogenation of diacetone alcohol . It is used as a chemical intermediate, a selective solvent in petroleum refining, a component of hydraulic fluids, a solvent for inks, and as an additive for cement . Industrial exposure is likely to be from direct contact or from inhalation, particularly if the material is heated.

General Description

Oily colorless liquid with a mild sweet odor. Floats and mixes slowly with water.

Air & Water Reactions

Hygroscopic. Water soluble [Hawley]

Reactivity Profile

2-Methyl-2,4-pentanediol is incompatible with the following: Strong oxidizers, strong acids [Note: Hygroscopic (i.e., absorbs moisture from the air).] .

Hazard

Toxic by ingestion and inhalation; irritant to skin, eyes, and mucous membranes. Combustible.

Health Hazard

Irritation of eyes, nose and throat; headache, dizziness, and nausea.

Chemical Reactivity

Reactivity with Water No reaction; Reactivity with Common Materials: Can catch fire when in contact with porous materials such as wood, asbestos, cloth, soil, or rusty metals; Stability During Transport: Stable at ordinary temperatures, however when heated this material can decompose to nitrogen and ammonia gases. The decomposition is not generally hazardous unless it occurs in confined spaces; Neutralizing Agents for Acids and Caustics: Flush with water and neutralize the resulting solution with calcium hypochlorite; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Potential Exposure

”Human Data;Primary Irritant. Hexylene glycol is used in metal workingfluids; the formulation of hydraulic brake fluids; in makingprinting inks. It is used as a fuel and lubricant additive; asan emulsifying agent; and as a cement additive.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irri gate immediately for at least15 min, occasionally lifting upper and lower lids. Seek med-ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medi-cal attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.

storage

Color Code- Green: General storage may be used.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Store in tightly closed containlers; in a cool, well-ventilated areaaway from oxidizers (such as perox ides, perchlorates, chlo-rates, permanganates, and nitrates). Where possible, auto-matically pump liquidfrom drums orotherstoragecontainers to process containers.

Shipping

HexyleneglycolisnotcitedinDOT'SPerformance-Oriented Packaging Standards.'

Purification Methods

Dry the diol with Na2SO4, then CaH2 and fractionally distil it under reduced pressure through a packed column, taking precautions to avoid absorption of water. [Beilstein 1 IV 2565.]

Incompatibilities

Incompatible with strong acids, caustics,aliphatic amines, isoc yanates, strong oxidizers. Hygroscopic(i.e., absorbs moisture from the air). .