1,2,3,4-Tetrahydronaphthalene Property

Melting point:

-35 °C (lit.)

Boiling point:

207 °C (lit.)

Density 

0.973 g/mL at 25 °C (lit.)

vapor density 

4.55 (vs air)

vapor pressure 

0.18 mm Hg ( 20 °C)

refractive index 

n20/D 1.541(lit.)

Flash point:

171 °F

storage temp. 

Store below +30°C.

solubility 

0.045g/l

form 

Fluid

color 

Colorless

Odor

pungent menthol odor

explosive limit

0.8%, 100°F

Odor Threshold

0.0093ppm

Water Solubility 

INSOLUBLE

Sensitive 

Air Sensitive

Merck 

14,9221

BRN 

1446407

Dielectric constant

2.77

Dielectric constant

2.77

Stability:

Stable. Combustible. Incompatible with strong oxidizing agents.

LogP

3.78 at 23℃

CAS DataBase Reference

119-64-2(CAS DataBase Reference)

NIST Chemistry Reference

Tetralin(119-64-2)

EPA Substance Registry System

1,2,3,4-Tetrahydronaphthalene (119-64-2)

Safety

Hazard Codes 

Xi,N,Xn

Risk Statements 

19-36/38-51/53-65-40

Safety Statements 

26-28-61-28A-62-36/37

RIDADR 

UN 3082 9/PG 3

WGK Germany 

2

RTECS 

QK3850000

Autoignition Temperature

723 °F

TSCA 

Yes

HS Code 

2902 90 00

HazardClass 

9

PackingGroup 

III

Hazardous Substances Data

119-64-2(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 2.86 g/kg (Smyth)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H304May be fatal if swallowed and enters airways

H315Causes skin irritation

H319Causes serious eye irritation

H351Suspected of causing cancer

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P273Avoid release to the environment.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P331Do NOT induce vomiting.

1,2,3,4-Tetrahydronaphthalene Chemical Properties,Usage,Production

Chemical Properties

colourless liquid with a mouldy smell

Chemical Properties

Tetralin or 1,2,3,4-tetrahydronaphthalene is a flammable liquid.

Uses

As a solvent for fats and oils and as an alternative to turpentine in polishes and paint; insecticide.

Uses

1,2,3,4-Tetrahydronaphthalene, is used as an intermediate for organic synthesis, solvent. It is used as a solvent.It is also used for the laboratory synthesis of dry HBr gas.

Uses

Degreasing agent. Solvent for naphthalene, fats, resins, oils, waxes, used instead of turpentine in lacquers, shoe polishes, floor waxes.

Definition

ChEBI: An ortho-fused bicyclic hydrocarbon that is 1,2,3,4-tetrahydro derivative of naphthalene.

Production Methods

Tetralin is prepared by the catalytic hydrogenation of naphthalene or during acidic, catalytic hydrocracking of phenanthrene. At 700℃, tetralin yields tars that contain appreciable quantities of 3,4-benzopyrene (172a).

Synthesis Reference(s)

Journal of the American Chemical Society, 111, p. 314, 1989 DOI: 10.1021/ja00183a048
Tetrahedron Letters, 12, p. 1853, 1971

General Description

A light colored liquid. May be irritating to skin, eyes and mucous membranes. Flash point 100-141°F.

Air & Water Reactions

Flammable.

Reactivity Profile

1,2,3,4-Tetrahydronaphthalene may react vigorously with strong oxidizing agents. May react exothermically with reducing agents to release hydrogen gas. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979 p.151-154].

Hazard

Irritant to eyes and skin; narcotic in high concentration.

Health Hazard

Liquid may cause nervous disturbance, green coloration of urine, and skin and eye irritation

Carcinogenicity

In male and female F344/N and NBR rats exposed to tetralin at concentrations of 0, 30, 60, or 120 ppm, 6 h plus T90 (12 min) per day, 5 days per week for 105 weeks, there were slightly increased incidences of cortical renal tubule adenoma in male rats. The incidence of cortical renal tubule adenomawas also significantly increased in the 120 ppm group. Exposure of male and female B6C3F1 mice to tetralin at concentrations of 0, 30, 60, or 120 ppm, 6 h plus T90 (12 min) per day, 5 days per week for 105 weeks and additional groups of male and female mice to the same concentrations for 12 months led to increased incidence of hemangiosarcoma of the spleen in 120 ppm females (172b).

Purification Methods

Wash tetralin with successive portions of conc H2SO4 until the acid layer is no longer coloured, then wash it with aqueous 10% Na2CO3, and then distilled water. Dry (CaSO4 or Na2SO4), filter, reflux and fractionally distil it under under reduced pressure from sodium or BaO. It can also be purified by repeated fractional freezing. Bass [J Chem Soc 3498 1964] freed tetralin, purified as above, from naphthalene and other impurities by conversion to ammonium tetralin-6-sulfonate. Concentrated H2SO4 (150mL) is added slowly to stirred tetralin (272mL) which is then heated on a water bath for about 2hours for complete solution. The warm mixture, when poured into aqueous NH4Cl solution (120g in 400mL water), gives a white precipitate which, after filtering off, is crystallised from boiling water, washed with 50% aqueous EtOH and dried at 100o. Evaporation of its boiling aqueous solution on a steam bath removes traces of naphthalene. The pure salt (229g) is mixed with conc H2SO4 (266mL) and steam distilled from an oil bath at 165-170o. An ether extract of the distillate is washed with aqueous Na2SO4, and the ether is evaporated, prior to distilling the tetralin from sodium. Tetralin has also been purified via barium tetralin-6-sulfonate, conversion to the sodium salt and decomposed in 60% H2SO4 using superheated steam. [Beilstein 5 H 491, 5 III 1219, 5 IV 1388.]