Aminopterin Property

Melting point:

225 °C

alpha 

18 º (c=1% in 0.1N NaOH)

Boiling point:

551.67°C (rough estimate)

Density 

1.4378 (rough estimate)

refractive index 

1.6910 (estimate)

Flash point:

87℃

storage temp. 

-20°C

solubility 

2 M NaOH: 50 mg/mL

form 

powder

pka

pKa 5.5 (Uncertain)

color 

yellow

Merck 

14,472

BRN 

69045

CAS DataBase Reference

54-62-6(CAS DataBase Reference)

EPA Substance Registry System

Aminopterin (54-62-6)

Safety

Hazard Codes 

T+

Risk Statements 

61-28-63-26/27/28

Safety Statements 

53-28-36/37-45-36/37/39-22

RIDADR 

UN 2811 6.1/PG 1

WGK Germany 

3

RTECS 

MA1050000

F 

8-10-23

HazardClass 

6.1(a)

PackingGroup 

I

HS Code 

29339900

Hazardous Substances Data

54-62-6(Hazardous Substances Data)

Toxicity

LDLo orl-rat: 2500 mg/kg JPETAB 95,303,49

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H300Fatal if swallowed

H360May damage fertility or the unborn child

Precautionary statements

P201Obtain special instructions before use.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P308+P313IF exposed or concerned: Get medical advice/attention.

Aminopterin Chemical Properties,Usage,Production

Description

Aminopterin is an amino derivative of folic acid, which was once used as an antineoplastic agent in the treatment of pediatric leukemia. In the 1950's its production was discontinued in favor of methotrexate, which is less potent but less toxic. Off label, aminopterin has also been used in the treatment of psoriasis. Clinicians need to be aware of the characteristic teratologic effects of aminopterin and methotrexate.

Chemical Properties

Dark Yellow Solid

Chemical Properties

Aminopterin is a white to yellow powder; commonly used as the dihydrate which forms clustersof yellow needles

Originator

Aminopterin,Sigma Chemical Company

Uses

Aminopterin has been used in the production of anti- neurogranin antibodies.

Uses

A folic acid antagonist. Its actively transported into cells by thefolate transporter. In the cell, its converted to a high molecular weight polyglutamate metabolite by folylpolyglutamate synthase, that, in turn, binds to dihydrofolate reductase and inhibits its activity.

Uses

antineoplastic, antirheumatic, folic acid antagonist

Definition

ChEBI: 4-aminofolic acid is a dicarboxylic acid. It has a role as a mutagen and an EC 1.5.1.3 (dihydrofolate reductase) inhibitor. It is functionally related to a folic acid.

Manufacturing Process

2,4,5,6-Tetraaminopyrimidine·H2SO4·H2O (75.0 g, 0.293 mole) was added to a stirred solution of BaCl2·2H2O (71.5 g, 0.293 mole) in H2O (1.45 L) at 85- 90°C. The mixture was stirred rapidly at about 90°C for 15 min, cooled to 40°C, and filtered from BaSO4, which was washed thoroughly on a funnel withH2O. The clear, yellow filtrate was then diluted further with H2O to give a volume of 4.35 L. This solution of the tetraaminopyrimidine·2HCl was then added to a solution of NaOAc (4.35 L of 4 N) in which 1,3-dihydroxyacetone (79.3 g, 0.88 mole) and cysteine·HCl·H2O (51.5 g, 0.293 mole) had just been dissolved. The resulting solution was stirred mechanically at room temperature while a slow stream of air was continuously passed through it for 26 hours. (Yellow-orange solid began separating after 2 hours). The mixture was then kept in a refrigerator for 16 hours before the solid was collected, washed successively with cold H2O, EtOH, and Et2O before it was dried to constant weight in vacuo over P2O5 at 25°C. [The crude product mixture (47 g) was weighed in order to obtain an estimate of the volume of 48% HBr required to form hydrobromide salts]. A mechanically stirred mixture of the dried solid and EtOH (6.05 L) was heated to 70°C, and a solution of 48% HBr (28 ml) in EtOH (490 ml) was added in a thin stream while the mixture was maintained at 70-75°C. The mixture was then refluxed for about 5 min with rapid stirring while nearly all of the solid dissolved. The hot solution was treated with Norit and filtered through a Celite mat. The clear yellow filtrate was kept in a refrigerator overnight while a first crop of orange colored solid separated. The collected solid was washed with EtOH, then dried in vacuo (56°C over P2O5) to give 17.2 g of product. The filtrate was concentrated by evaporation (rotary evaporator) to about 2 L and then refrigerated to give a second crop of 10.2 g, which was dried as before; total yield of crude 2,4- diamino-6-pteridinemethanol hydrobromide 27.4 g (34%). The PMR spectrum of this material in CF3CO2D showed it to contain a barely detectable amount of methyl-substituted 2,4-diaminopteridine·HBr.
Bromine (59.6 g, 0.373 mole) was added dropwise over a 30 min to a stirred solution of triphenylphosphine (97.7 g, 0.373 mole) in anhydrous dimethylacetamide (486 ml) kept at 10°C (ice bath) and protected from atmospheric moisture. (Bromine remaining in the funnel was rinsed with 10 ml of dimethylacetamide). A smooth suspension containing finely divided, crystalline triphenylphosphine dibromide resulted. The 2,4-diamino-6- pteridinemethanol·HBr (25.4 g, 0.093 mole) described above was added in one portion through a powder funnel (with the aid of 10 ml dimethylacetamide). The ice bath was removed, and the stirred mixture was allowed to warm to 20-25°C. After about 1 hour, complete solution had occurred. The solution, which gradually developed a dark red color, was kept at 20-25°C for 1 hour longer and was then chilled (ice bath) before it was treated with EtOH (72 ml). After overnight refrigeration, the solvents were removed by evaporation in vacuo. The dark, semisolid residue was stirred with two 300 ml of C6H6 (to remove triphenylphosphine oxide), and each portion was removed from the C6H6 insoluble product by decantation. The solid that remained was dissolved with stirring in glacial AcOH (660 ml) which had been preheated to 80°C. The mixture was kept in a bath at 80°C until solution was complete. Tan crystalline solid separated as the dark solution was allowed to cool. Overnight refrigeration caused the AcOH to partially freeze. When it had thawed, the solid was collected, washed with chilled AcOH followed by Et2O, and dried in vacuo (over P2O5 and NaOH pellets) at successive temperatures of 25°C, 56°C, and 110°C. (The higher temperature was necessary for complete removal of AcOH). The yield was 15.3 g (49%). (Some runs afforded 60% yield). This sample was further purified by reprecipitation from MeOH solution (Norit) by addition of Et2O followed by drying in vacuo (25°C, P2O5), yield 13.0 g (42%) of 2,4-diamino-6-(bromomethyl)pteridine hydrobromide as A mixture of 2,4-diamino-6-(bromomethyl)pteridine hydrobromide (168 mg, 0.500 mmole) and N-(4-aminobenzoyl)-L-glutamic acid (400 mg, 1.50 mmoles) in dimethylacetamide (2 ml) was stirred at 25°C under N2 in a stoppered flask protected from light. Solution occurred after 2 hours. After 18 hours, the orange solution was mixed with H2O (15 ml) with stirring to give a finely divided, yellow precipitate. The mixture was centrifuged, and the supernatant removed by decantation. The yellow solid was stirred with four 15 ml portions of H2O, each of which was removed by decantation after centrifugation. The solid was then suspended in EtOH (15-20 ml), collected by filtration, washed with Et2O, and dried in vacuo (25°C, P2O5) to give hydrated N-[4-[[(2,4-diamino-6-pteridinyl)methyl]amino]benzoyl]-L-glutamic acid (Aminopterin) hydrate (4:7) in 68% yield (160 mg). Examination by TLC revealed one UV-absorbing spot and no fluorescence at any point.

Therapeutic Function

Antineoplastic

General Description

Clusters of yellow needles. Used as a rodenticide, medicine and rodenticide. Not registered as a rodenticide in the U.S.

Health Hazard

An antimetabolite; antagonizes the utilization of folic acid by the body. Highly toxic by ingestion.

Biochem/physiol Actions

Folic acid antagonist. Aminopterin is actively transported into cells by the folate transporter. In the cell, it is converted to a high molecular weight polyglutamate metabolite by folylpolyglutamate synthase that, in turn, binds to dihydrofolate reductase and inhibits its activity. Aminopterin-polyglutamate is degraded intracellularly by γ-glutamyl hydrolase.

Mechanism of action

Aminopterin is an amino derivative of folic acid which binds competitively to the dihydrofolate reductase enzyme to block tetrahydrofolate synthesis. Tetrahydrofolate is essential in the production of purines and pyrimadines, thus it's deficiency results in a reduction of DNA, RNA and protein synthesis.

Safety Profile

Poison by ingestion and intraperitoneal routes. Human and experimental teratogenic data. Other experimental reproductive effects. Mutation data reported. Human systemic effects by ingestion: gastrointestinal. Questionable carcinogen with experimental tumorigenic data. When heated to decomposition it emits toxic fumes of NOx,.

Potential Exposure

Aminopterin is used as a medicine (as a folic acid antagonist), rodenticide, and agricultural chemical.

Shipping

UN2811 Toxic solids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required

Purification Methods

Purify aminopterin by recrystallisation from H2O. It has properties similar to those of methotrexate (above). It has UV at max 244, 290 and 355nm ( 18600, 21300 and 12000) in H2O at pH 1; 260, 284 and 370nm ( 28500, 26400 and 8600) in H2O at pH 13. [Seeger et al. J Am Chem Soc 71 1753 1949, Angier & Curran J Am Chem Soc 8 1 2814 1959, Blakley The Biochemistry of Folic Acid and Related Pteridines, North-Holland Publ Co., Amsterdam, NY, pp 157-163 1969.] For small quantities, chromatograph it on DEAE cellulose with a linear gradient of ammonium bicarbonate pH 8 and increase the molarity from 0.1 to 0.4. Monitoring is by following the UV absorption of the fractions. For larger quantities, a near boiling solution of aminopterin (5g) in H2O (400mL) is slowly treated with small portions of MgO powder (~0.7g, calcined magnesia) with vigorous stirring until a small amount of MgO remained undissolved and the pH rises from 3-4 to 7-8. Charcoal (1g) is added to the hot solution and filtered immediately through a large sintered glass funnel of medium porosity and lined with a hot wet pad of Celite (~2-3 mm thick). The filtrate is cooled in ice, and the crystals of the Mg salt are collected by filtration and recrystallised from boiling H2O (200mL). The crystals are washed with EtOH and dried in vacuo. The Mg salt is redissolved in boiling H2O (200mL) and carefully acidified with vigorous agitation with AcOH (2mL). Pure aminopterin (3g) separates in fine yellow needles (dihydrate) which are easily filtered. The solid is washed with cold H2O, then Me2CO and dried in vacuo. If a trace of impurity is still present as shown by DEAE cellulose chromatography or TLC, repetition of the process will remove it; see UV above. [Loo J Med Chem 8 139 1965, Beilstein 26 IV 3831.] CARCINOGENIC.

Waste Disposal

It is inappropriate and possibly dangerous to the environment to dispose of expired or wastepharmaceuticals by flushing them down the toilet or discarding them to the trash. Household quantities of expired or waste pharmaceuticals may be mixed with wet cat litter or coffee grounds, double-bagged in plastic, discard in trash. Larger quantities shall carefully take into consideration applicable DEA, EPA, and FDA regulations. If possible return the pharmaceutical to the manufacturer for proper disposal being careful to properly label and securely package the material. Alternatively, the waste pharmaceutical shall be labeled, securely packaged and transported by a state licensed medical waste contractor to dispose by burial in a licensed hazardous or toxic waste landfill or incinerator