N,N-Dimethyldodecylamine Property

Melting point:

−20 °C(lit.)

Boiling point:

80-82 °C0.1 mm Hg(lit.)

Density 

0.787 g/mL at 20 °C(lit.)

vapor pressure 

<129 mm Hg ( 21 °C)

refractive index 

n20/D 1.4375(lit.)

Flash point:

>230 °F

storage temp. 

-20°C

solubility 

Chloroform (Slightly), Methanol (Slightly)

form 

Liquid

pka

9.78±0.28(Predicted)

color 

Clear

Specific Gravity

0.786 (20℃)

Water Solubility 

Negligible

Sensitive 

Air & Moisture Sensitive

BRN 

1700191

LogP

1.3-6.91 at 20℃ and pH7.1-8.8

Surface tension

25.2mN/m at 1g/L and 25℃

Dissociation constant

9.78 at 25℃

CAS DataBase Reference

112-18-5(CAS DataBase Reference)

NIST Chemistry Reference

1-Dodecanamine, N,N-dimethyl-(112-18-5)

EPA Substance Registry System

Lauryldimethylamine (112-18-5)

Safety

Hazard Codes 

C,N

Risk Statements 

22-34-50/53

Safety Statements 

26-36/37/39-45-60-61

RIDADR 

UN 2735 8/PG 2

WGK Germany 

2

RTECS 

JR6600000

F 

10-34

TSCA 

Yes

HazardClass 

8

PackingGroup 

III

HS Code 

29211990

Hazardous Substances Data

112-18-5(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P270Do not eat, drink or smoke when using this product.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

N,N-Dimethyldodecylamine Chemical Properties,Usage,Production

Chemical Properties

Liquid

Uses

Barlene(R) tertiary amines are used as chemical intermediates for the manufacture of quaternary ammonium compounds, amine oxide and betaine surfactants

Uses

N,N-Dimethyldodecylamine is used as a as a capping agent during the synthesis of Au(core) -Pd(shell) bimetallic nanoparticles in toluene. It is used in the synthesis of N-alkyl-N,N-dimethyl-1-ammonio-2-hydroxy-3-propane sulfonate. Also used in the preparation of novel bis-quaternary ammonium salt.

General Description

N,N-Dimethyldodecylamine is a colorless to light colored liquid at room temperature. Has the fishy odor that characterizes fatty amines. Very slightly soluble in water and denser than water. Industrial materials containing this compound typically are blends with closely similar alkyl compounds such as tetradecyldimethylamine and hexadecyldimethylamine. Used as intermediates in the manufacture of quaternary ammonium compounds for use in cleaning agents and cosmetics.

Reactivity Profile

N,N-dimethyldodecylamine, a tertiary alkyl amine, is non-flammable but combustible (flash point >230°F). May react with copper and copper-containing alloys such as brass. Incompatible with strong oxidizing agents and with strong acids. Very toxic to the aquatic organisms. Dangerous to the environment.

Health Hazard

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.