Bis(2-chloroethoxy)methane Chemical Properties

Melting point:

-32.3°C

Boiling point:

112°C/20mm

Density 

1.23

vapor pressure 

1 at 53 °C (Weast, 1986)

refractive index 

1.45

storage temp. 

Refrigerator, under inert atmosphere

solubility 

Chloroform (Sparingly), Methanol (Slightly)

form 

Oil

color 

Colorless liquid

Water Solubility 

81,00 mg/L at 25 °C using method of Moriguchi (1975)

Henry's Law Constant

(x 10^-7 atm?m³/mol): 3.78 (calculated, U.S. EPA, 1980a)

LogP

1.6 at 20℃

CAS DataBase Reference

111-91-1(CAS DataBase Reference)

NIST Chemistry Reference

Methane, bis(2-chloroethoxy)-(111-91-1)

EPA Substance Registry System

Bis(2-chloroethoxy)methane (111-91-1)

Safety Information

Hazard Codes 

Xi,T

Risk Statements 

25

Safety Statements 

45

RIDADR 

2810

HazardClass 

6.1(b)

PackingGroup 

III

Hazardous Substances Data

111-91-1(Hazardous Substances Data)

Toxicity

Acute oral LD₅₀ for rats 65 mg/kg (quoted, RTECS, 1985).

Bis(2-chloroethoxy)methane Usage And Synthesis

Description

Bis(2-chloroethoxy)methane is a colorlessliquid. Molecular weight=173.1; Boiling point=218℃;Freezing/Melting point=233℃; Flash point=110℃(oc). Hazard Identification (based on NFPA-704 M RatingSystem): Health 2, Flammability 1, Reactivity 0. Slight solubility in water; solubility=0.8%.

Chemical Properties

Bis(2-chloroethoxy)methane is a colorless liquid.

Uses

Manufacture of insecticides, polymers; degreasing solvent; intermediate for polysulfide rubber.

Uses

Bis(2-chloroethoxy)methane is an chloroether used to manufacture polysulfide polymers.

General Description

A colorless liquid. Boiling point 217.5°C, Flash point 230°F. Density 1.23 g / cm3. May be toxic by ingestion or inhalation. Severely irritates skin, eyes, and mucous membranes. Used as a solvent.

Air & Water Reactions

Slightly soluble in water.

Reactivity Profile

Bis(2-chloroethoxy)methane, the b-chloroethyl acetal of formaldehyde, is incompatible with oxidizing agents.

Health Hazard

ACUTE/CHRONIC HAZARDS: Toxic by inhalation and ingestion; Strong irritant.

Fire Hazard

Not Flammable.

Potential Exposure

The chloroalkyl ethers have a wide variety of industrial uses in organic synthesis, treatment of textiles; the manufacture of polymers; polysulfide rubbers, and insecticides; as degreasing agents and solvents; and in the preparation of ion exchange resins.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least 15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.

Environmental Fate

Biological. Using settled domestic wastewater inoculum, bis(2-chloroethoxy)methane (5 and 10 mg/L) did not degrade after 28 d of incubation at 25 °C (Tabak et al., 1981).
Chemical/Physical. At influent concentrations of 10, 1.0, 0.1, and 0.01 mg/L, the GAC adsorption capacities were 50, 11, 2.6, and 0.6 mg/g, respectively (Dobbs and Cohen, 1980).

storage

Color Code—Green: General storage may be used.Store in tightly closed containers in a cool, well-ventilatedarea away from oxidizers. Sources of ignition, such assmoking and open flames, are prohibited where this chemical is used, handled, or stored in a manner that could createa potential fire or explosion hazard.

Shipping

UN2810 Toxic liquids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1—Poisonous materials, Technical Name Required.

Incompatibilities

The aqueous solution is a strong acid; keep away from bases and alkaline material. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Contact with mineral acids causes decomposition.

Waste Disposal

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Destroy by high-temperature incineration with HCl scrubber.

Bis(2-chloroethoxy)methane(111-91-1)Related Product Information

• Triphenylmethyl Chloride
• 1,3-Dioxan-5-ol
• Diethanolamine
• Chloromethane
• Dimethoxymethane
• 2,2-Diethoxyethylamine
• Niclosamide ethanolamine salt
• DIETHOXYMETHANE
• Bromoacetaldehyde diethyl acetal
• CHLORODIBROMOMETHANE
• Sucralose
• PENTAERYTHRITYL TETRABROMIDE
• TRIPHENYL METHANE CHLORID
• Cloretate
• Trichloroparaldehyde
• Difluorochloromethane
• 2-Chloroethanol
• TRIS(2-CHLOROETHYL)- ORTHOFORMATE