4-(4-Fluorophenyl)butanoic acid
4-(4-Fluorophenyl)butanoic acid Basic information
- Product Name:
- 4-(4-Fluorophenyl)butanoic acid
- Synonyms:
-
- TIMTEC-BB SBB010216
- CHEMBRDG-BB 4002813
- 4-(4-FLUOROPHENYL)BUTYRIC ACID
- 4-(p-fluorophenyl)butyric acid
- 4-(4-Fluorophenyl)butanoic acid
- 4-Fluorobenzenebutanoic acid
- Benzenebutanoic acid, 4-fluoro-
- -(4-Fluorophenyl)butanoic acid
- CAS:
- 589-06-0
- MF:
- C10H11FO2
- MW:
- 182.19
- EINECS:
- 209-631-8
- Product Categories:
-
- Aromatic Building Blocks
- Carboxylic Acids
- Aliphatics
- Carboxylic Acids
- Mol File:
- 589-06-0.mol
4-(4-Fluorophenyl)butanoic acid Chemical Properties
- Melting point:
- 45 °C
- Boiling point:
- 161-164 °C(Press: 4 Torr)
- Density
- 1.182±0.06 g/cm3(Predicted)
- storage temp.
- Sealed in dry,Room Temperature
- pka
- 4.75±0.10(Predicted)
- Appearance
- White to off-white Solid
- CAS DataBase Reference
- 589-06-0(CAS DataBase Reference)
4-(4-Fluorophenyl)butanoic acid Usage And Synthesis
Synthesis
366-77-8
589-06-0
Synthesis of 4-(4-fluorophenyl)butyric acid: 4-(4-fluorophenyl)-4-oxobutanoic acid (0.98 g, 5 mmol) and 85% KOH (0.79 g, 12 mmol) were added to a round bottomed flask fitted with a Dean-Stark apparatus and a reflux condenser and suspended in diethylene glycol (10 mL). 50% hydrazine monohydrate (1.20 g, 12 mmol) was added slowly at room temperature and the reaction mixture was subsequently heated to 120-130 °C and maintained for 2 hours. After about 45 min, the reaction mixture became homogeneous. after 2 h, the temperature was increased to 180-200 °C and stirring was continued for 3 h. Residual hydrazine and water were removed by means of a Dean-Stark water separator. After completion of the reaction, it was cooled to room temperature, diluted with H2O (10 mL) and poured into 2.5N aqueous HCl (20 mL). The organic product was extracted with EtOAc (3 x 15 mL), the organic phases were combined, washed with brine (10 mL), dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. Purification by column chromatography (30-50% EtOAc/hexane) afforded the target product 4-(4-fluorophenyl)butanoic acid as a clear viscous oil (0.32 g, 35%).1H NMR (500 MHz, CDCl3): δ 11.50 (br, 1H), 7.16 (m, 2H), 7.00 (m, 2H), 2.67 (t, J = 7.6 Hz, 2H), 2.40 (t, J = 7.4 Hz, 2H), 1.97 (quin, J = 7.5 Hz, 2H).13C NMR (125 MHz, CDCl3): δ 180.16, 161.34 (d, J = 243.4 Hz), 136.74, 129.76 (d, J = 7.3 Hz), 115.09 (d, J = 7.3 Hz), 115.09 (d, J = 7.3 Hz), 115.09 (d, J = 7.3 Hz), 115.09 (d, J = 7.3 Hz), 115.09 (d, J = 7.3 Hz) 115.09 (d, J = 20.9 Hz), 34.09, 33.20, 26.24.
References
[1] Patent: US5872118, 1999, A
[2] Patent: US6124284, 2000, A
[3] Patent: US5719186, 1998, A
[4] Archiv der Pharmazie, 1998, vol. 331, # 12, p. 395 - 404
[5] Patent: WO2015/134973, 2015, A1. Location in patent: Page/Page column 98
4-(4-Fluorophenyl)butanoic acidSupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 821-50328103-801 18930552037
- 3bsc@sina.com
- Tel
- 400-6106006
- saleschina@alfa-asia.com
- Tel
- 021-021-58432009 400-005-6266
- sales8178@energy-chemical.com
- Tel
- 86-027-67849912
- sales@chemwish.com
4-(4-Fluorophenyl)butanoic acid(589-06-0)Related Product Information
- Indole-3-butyric acid
- Hydrocortisone-17-butyrate
- CELLULOSE ACETATE BUTYRATE
- 4-Aminobutyric acid
- 4-Phenylbutyric acid
- Butyric Acid
- MCPB
- Chlorambucil
- 4,5-Dihydro-5-(4-fluorophenyl)-2(3H)-furanone
- 3-(4-FLUOROBENZOYL)PROPIONIC ACID
- BOC-(S)-3-AMINO-4-(4-FLUOROPHENYL)BUTANOIC ACID,N-T-BUTOXYCARBONYL-(S)-3-AMINO-4-(4-FLUOROPHENYL)BUTANOIC ACID
- 4,4-Bis(4-fluorophenyl)butyric acid
- (S)-4-AMINO-3-(4-FLUOROPHENYL)BUTANOIC ACID
- FMOC-(R)-3-AMINO-4-(4-FLUOROPHENYL)BUTANOIC ACID,N-(9-FLUORENYLMETHOXYCARBONYL)-(R)-3-AMINO-4-(4-FLUOROPHENYL)BUTANOIC ACID
- BOC-(S)-3-AMINO-4-(2-FLUOROPHENYL)BUTANOIC ACID,N-T-BUTOXYCARBONYL-(S)-3-AMINO-4-(2-FLUOROPHENYL)BUTANOIC ACID
- (R)-3-AMINO-4-(4-FLUOROPHENYL)BUTANOIC ACID
- BOC-(S)-3-AMINO-4-(3-FLUOROPHENYL)BUTANOIC ACID,N-T-BUTOXYCARBONYL-(S)-3-AMINO-4-(3-FLUOROPHENYL)BUTANOIC ACID
- 3-(2',4'-DIFLUOROBENZOYL)PROPIONIC ACID