Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Pharmaceutical intermediates >  Heterocyclic compound >  Pyridine compound >  Iodopyridine >  2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE

2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE

Basic information Safety Supplier Related

2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE Basic information

Product Name:
2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE
Synonyms:
  • 2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE
  • (2-Fluoro-4-iodopyridin-3-yl)Methanol
  • 3-Pyridinemethanol,2-fluoro-4-iodo-
  • 2-Fluoro-4-iodo-3-pyridinemethanol
  • 2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE ISO 9001:2015 REACH
CAS:
171366-19-1
MF:
C6H5FINO
MW:
253.01
Product Categories:
  • Pyridines
  • Boronic Acid
  • Pyridine
Mol File:
171366-19-1.mol
More
Less

2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE Chemical Properties

Boiling point:
330.4±37.0 °C(Predicted)
Density 
2.061
storage temp. 
under inert gas (nitrogen or Argon) at 2–8 °C
pka
12.27±0.10(Predicted)
Appearance
Light yellow to yellow Solid
More
Less

2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINE Usage And Synthesis

Synthesis

113975-22-7

109-94-4

171366-19-1

Example 1 Synthesis of 2-fluoro-4-iodo-3-(hydroxymethyl)pyridine: A solution of LDA was prepared by reacting diisopropylamine (0.63 mL, 4.49 mmol) with n-butyllithium (4.49 mmol) in tetrahydrofuran (THF, 10 mL) at -78 °C and under nitrogen protection. To this solution, a solution of 2-fluoro-3-iodopyridine (1 g, 4.48 mmol) dissolved in THF (2 mL) was added dropwise and stirred for 1 hour at -78 °C. Subsequently, ethyl formate (1.1 mL, 13.6 mmol) was added at the same temperature and stirring was continued for 30 min. The reaction mixture was quenched with saturated sodium bicarbonate solution and slowly warmed to room temperature. Sodium borohydride (0.34 g, 8.99 mmol) was slowly added to the mixture and stirred for 30 minutes before extracting with ethyl acetate. The organic phases were combined, washed with brine, dried over anhydrous magnesium sulfate and concentrated under reduced pressure. The residue was purified by radial preparative thin layer chromatography (silica gel, hexanes, 10% ethyl acetate/hexanes, 20% ethyl acetate/hexanes) to give 708 mg (62% yield) of the target product as a white solid with a melting point of 69°-70 °C. Elemental analysis (C6H5FINO): calculated values: C 28.48, H 1.99, N 5.54; measured values: C 28.55, H 1.94, N 5.48. IR spectrum (KBr, cm^-1): 3336, 1584, 1541, 1446, 1401, 1264, 1218, 1003, 870, 833, 803. 761, 577. 1H NMR (CDCl3): δ 7.79-7.82 (d, 1H, J = 5 Hz), 7.66-7.68 (d, 1H, J = 5 Hz), 4.82-4.86 (d, 2H, J = 7 Hz), 1.99-2.04 (t, 1H, J = 14 Hz). 13C NMR (CDCl3): δ 162.29, 159.05, 147.30, 147.09, 132.79, 132.73, 126.14, 125.73, 114.21, 62.24.

References

[1] Patent: US5496952, 1996, A

2-FLUORO-3-(HYDROXYMETHYL)-4-IODOPYRIDINESupplier

Capot Chemical Co., Ltd
Tel
+86 (0) 571 85 58 67 18
SuZhou ShiYa Biopharmaceuticals, Inc.
Tel
86(512)5235 8471 17715136450
Email
sales@shiyabiopharm.com
Hebei Summedchem Co.,Ltd
Tel
0319-5801333-8008 15630992918
Email
sales@summedchem.com
Hangzhou Milestone Pharmtech Co., Ltd.
Tel
0571-82896630 18969958410
Email
sales_hz@milestonepharmtech.com
Amadis Chemical Company Limited
Tel
571-89925085
Email
sales@amadischem.com