Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  API >  Antibiotics >  Other antibiotic Drugs >  Amoxicillin trihydrate

Amoxicillin trihydrate

Basic information Safety Supplier Related

Amoxicillin trihydrate Basic information

Product Name:
Amoxicillin trihydrate
Synonyms:
  • AmoxycillinTrihydrateBp98
  • AmoxicillineTrihydrate
  • AMOXICILLINE 3-HYDRATE
  • 6-(D-[-]-α-Amino-p-hydroxyphenylacetamido) penicillanic acid trihydrate
  • 4-Thia-1-azabicyclo3.2.0heptane-2-carboxylic acid, 6-(2R)-amino(4-hydroxyphenyl)acetylamino-3,3-dimethyl-7-oxo-, trihydrate, (2S,5R,6R)-
  • AMOXICILLINTRIHYDRATE,USP
  • amoxicillin soluble powder70%
  • 4-Thia-1-azabicyclo(3.2.0)heptane-2-carboxylic acid, 6-((amino(4-hydroxyphenyl)acetyl)amino)-3,3-dimethyl-7-oxo-, trihydrate (2S-(2alpha,5alpha,6beta(S*)))-
CAS:
61336-70-7
MF:
C16H21N3O6S
MW:
383.42
EINECS:
999-999-2
Product Categories:
  • raw material
  • Pyridines
  • veterinary medicine,soluble powder
  • AMOXIL
  • Antibacterial spectrum
  • API
  • Antibiotics for Research and Experimental Use
  • beta-Lactams (Antibiotics for Research and Experimental Use)
  • Biochemistry
  • Pharma
  • Chiral Reagents
  • Intermediates & Fine Chemicals
  • Pharmaceuticals
  • Sulfur & Selenium Compounds
  • Antibiotic Explorer
  • beta-Lactam Structure
  • A
  • Alphabetic
  • AM to AQAntibiotics
  • BactericidalAntibiotics
  • Chemical Structure
  • Principle
Mol File:
61336-70-7.mol
More
Less

Amoxicillin trihydrate Chemical Properties

Melting point:
>200°C (dec.)
alpha 
D20 +246° (c = 0.1)
refractive index 
302 ° (C=0.1, H2O)
storage temp. 
Inert atmosphere,2-8°C
solubility 
Slightly soluble in water, very slightly soluble in ethanol (96 per cent), practically insoluble in fatty oils. It dissolves in dilute acids and dilute solutions of alkali hydroxides.
color 
White to Off-White
Water Solubility 
Soluble in water at 3.4mg/ml.
Merck 
14,577
JECFA Number
85
BRN 
7507120
CAS DataBase Reference
61336-70-7(CAS DataBase Reference)
EPA Substance Registry System
Amoxicillin trihydrate (61336-70-7)
More
Less

Safety Information

Hazard Codes 
Xn,Xi
Risk Statements 
42/43
Safety Statements 
36-36/37-22
WGK Germany 
2
RTECS 
XH8300000
HS Code 
29411000
Toxicity
LD50 ipr-rat: 2870 mg/kg KSRNAM 7,3040,73
More
Less

Amoxicillin trihydrate Usage And Synthesis

Description

Amoxicillin was synthesized by Beecham Research Laboratories in 1968. A hydroxyl group was introduced on the benzene ring of ampicillin. Amoxicillin shows about a twofold higher serum concentration than ampicillin when administered orally. It was shown by double-blind comparative studies with ampicillin that amoxicillin was as effective as ampicillin when administered at half the dose of ampicillin.

Chemical Properties

White to Off-White Solid

Originator

Arnoxil,Bencard,UK,1972

Uses

Semi-synthetic antibiotic related to Penicillin. Antibacterial.

Uses

Amoxicillin trihydratesemi-synthetic antibiotic related to Penicillin which has antibacterial poperties. It is used for treatment of a variety of bacterial infections. It is used as a pharmaceutical product as a antibiotic agent, anti-infective drug raw materials.

Definition

ChEBI: A hydrate that is the trihydrate form of amoxicillin; a semisynthetic antibiotic, used either alone or in combination with potassium clavulanate (under the trade name Augmentin) for treatment of a variety of bacterial infections.

Manufacturing Process

Ethyl chlorocarbonate (2.2 ml) was added to an ice cold solution of O,N-dibenzyloxycarbonyl-p-oxy-dl-α-aminophenylacetic acid (10 grams) and triethylamine (3.85 ml) in dry acetone (193 ml). The mixture was stirred at 0°C for 5 minutes during which triethylamine hydrochloride precipitated. The suspension was cooled to -30°C and stirred vigorously while adding as rapidly as possible an ice cold solution of 6-aminopenicillanic acid (5.85 grams) in 3% aqueous sodium bicarbonate (193 ml), the temperature of the mixture never being allowed to rise above 0°C. The resulting clear solution was stirred for 30 minutes at 0°C, and then for a further 30 minutes, without external cooling, and finally extracted with diethyl ether (3 x 200 ml) only the aqueous phase being retained.
This aqueous solution was brought to pH 2 by the addition of hydrochloric acid and the 6-(O,N-dibenzyloxycarbonyl-p-oxy-dl-α- aminophenylacetamido)penicillanic acid so liberated was extracted into diethyl ether (50 ml and 2 portions of 30 ml). The ether phase was washed with water (3 x 5 ml) and the water washings were discarded.
Finally, the penicillin was converted to the sodium salt by shaking the ether solution with sufficient 3% sodium bicarbonate to give a neutral aqueous phase, separating the latter and evaporating it at low pressure and temperature below 20°C. The product was finally dried over phosphorus pentoxide in vacuo to give sodium 6-(O,N-dibenzyloxycarbonyl-p-oxy-dl-α- aminophenylacetamido)-penicillanate (9.2 grams).
A suspension of palladium on calcium carbonate (36 grams of 5%) in water (150 ml) was shaken in an atmosphere of hydrogen at room temperature and atmospheric pressure for 1 hour. A neutral solution of sodium 6-(O,Ndibenzyloxycarbonyl- p-oxy-dl-α-aminophenylacetamido)penicillanate (9 grams) in water (100 ml) was then added and shaking in hydrogen was resumed for one hour. The suspension was then filtered and the collected catalyst was washed well with water without being allowed to suck dry between washings. The combined filtrate and washings were then brought to pH 6.5 with dilute hydrochloric acid and evaporated to dryness at reduced pressure and temperatures below 20°C. The product was finally dried over phosphorus pentoxide in vacuo to give a solid (5.4 grams) containing 6-(phydroxy- dl-α-aminophenylacetamido)penicillanic acid.

brand name

Amoxil (GlaxoSmithKline); Dispermox (Ranbaxy); Larotid (GlaxoSmithKline); Trimox (Apothecon) [Name previously used: Amoxycillin.].

Therapeutic Function

Antibacterial

Contact allergens

Amoxicillin is both a topical and a systemic sensitizer. Topical sensitization occurs in health care workers. Systemic drug reactions are frequent, such as urticaria, maculo-papular rashes, baboon syndrome, acute generalized exanthematous pustulosis, or even toxic epidermal necrosis. Cross-reactivity is common with ampicillin, and can occur with other penicillins.

Safety Profile

Moderately toxic. An experimental teratogen. Other experimental reproductive effects. When heated to decomposition it emits toxic fumes of SOx and NOx.

Amoxicillin trihydrate Preparation Products And Raw materials

Preparation Products

Raw materials

Amoxicillin trihydrateSupplier

Wuhan Biocar Pharmacy Co.,Ltd Gold
Tel
18665676617
Email
2956176220@qq.com
Wuhan Fortuna Chemical Co., Ltd Gold
Tel
027-027-59207852 13308628970
Email
buy@fortunachem.com
J & K SCIENTIFIC LTD.
Tel
010-82848833 400-666-7788
Email
jkinfo@jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006608290; 18621169109
Email
market03@meryer.com
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Email
Sales-CN@TCIchemicals.com