5-HYDROXY-4-METHYL-2(5H)FURANONE
5-HYDROXY-4-METHYL-2(5H)FURANONE Basic information
- Product Name:
- 5-HYDROXY-4-METHYL-2(5H)FURANONE
- Synonyms:
-
- (R,S)-5-Hydroxy-4-methyl-5H-furan-2-one
- 4-Methyl-5-hydroxy-2(5H)-furanone
- 5-HYDROXY-4-METHYL-2(5H)FURANONE
- 2(5H)-FURANONE, 5-HYDROXY-4-METHYL
- 5-HYDROXY-4-METHYL-5H-FURAN-2-ONE
- 5-Hydroxy-4-Methyl-2(5H)-Furan
- 5-HYDROXYDODECANOIC LACTONE
- 2(5H)-FURANONE, 5-HYDROXY-4-METHYL (INTERMEDIATES OF ISOTRETINOIN)
- CAS:
- 40834-42-2
- MF:
- C5H6O3
- MW:
- 114.1
- EINECS:
- 609-869-6
- Product Categories:
-
- Intermediates of Isotretinoin
- Mol File:
- 40834-42-2.mol
5-HYDROXY-4-METHYL-2(5H)FURANONE Chemical Properties
- Boiling point:
- 113 °C(Press: 0.05 Torr)
- Density
- 1.349±0.06 g/cm3(Predicted)
- storage temp.
- 2-8°C
- solubility
- DMSO, Methanol (Slightly)
- form
- Yellow to Dark Yellow
- pka
- 10.04±0.40(Predicted)
- Appearance
- Light brown to brown Solid
- InChI
- InChI=1S/C5H6O3/c1-3-2-4(6)8-5(3)7/h2,5,7H,1H3
- InChIKey
- XRNPHZPFAWLRNJ-UHFFFAOYSA-N
- SMILES
- O1C(O)C(C)=CC1=O
- CAS DataBase Reference
- 40834-42-2(CAS DataBase Reference)
5-HYDROXY-4-METHYL-2(5H)FURANONE Usage And Synthesis
Chemical Properties
Brownish Yellow Semi Solid
Uses
5-Hydroxy-4-methyl-2(5H)-furanone is a non-halogenated furanone used in studies to verify the mutagenicity of halogen substituted furanones.
Synthesis
616-02-4
931-23-7
40834-42-2
Under nitrogen protection, 5.34 g (21.00 mmol) LiAlH(t-BuO)3 was dissolved in 40 cm3 anhydrous THF and added dropwise to a solution of 1.68 g (15.00 mmol) citraconic anhydride dissolved in 50 cm3 anhydrous THF over a period of 30 min, and the reaction temperature was maintained at -30 °C. After the dropwise addition was completed, the temperature of the reaction system was raised to -15°C and maintained for 3 hours. Subsequently, the reaction mixture was slowly warmed up to room temperature. Upon completion of the reaction, the reaction was quenched with 50 cm3 1M HCl solution, followed by washing with saturated NaCl solution and extraction of the crude product with EtOAc (3 x 50 cm3). The organic phases were combined and dried with MgSO? The solvent was removed by concentration under reduced pressure to give the crude product. Purification by silica gel column chromatography (eluent: petroleum ether/ethyl acetate=80:20) afforded 5-hydroxy-3-methylfuran-2(5H)-one (7a, 1.023 g, 60% yield) and 4-methyl-5-hydroxyfuran-2-one (7b, 116 mg, 7% yield) as yellow oils, respectively.TLC analysis (unfolding agent: petroleum ether/ethyl acetate= 80:20) showed that the Rf values of 7a and 7b were 0.16 and 0.15, respectively. 1H NMR (400 MHz, acetone-d6) δ of 7a: 6.67 (bs, 1H), 6.02 (bs, 1H), 5.87 (p, J = 1.5 Hz, 1H), 2.08 (d, J = 1.5 Hz, 3H) ppm; 13C NMR (100 MHz, acetone-d6) ppm. MHz, acetone-d6) δ: 171.30 (C), 166.65 (C), 118.68 (CH), 100.25 (CH), 13.15 (CH3) ppm; MS (EI): m/z (%) = 114.0 ([M]+, 2), 113.0 (7), 86.0 (61), 85.0 (13), 69.0 ( 100), 68.0 (82), 41.1 (50), 40.1 (65), 39.1 (93).
References
[1] Monatshefte fur Chemie, 2018, vol. 149, # 8, p. 1475 - 1480
5-HYDROXY-4-METHYL-2(5H)FURANONESupplier
- Tel
- 18354101831 13305414159
- 2067831699@qq.com
- Tel
- 18653300596
- 3989432235@qq.com
- Tel
- 13376082704 13376084917;
- 3930959291@qq.com
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 400-6009262 16621234537
- chenyj@titansci.com
5-HYDROXY-4-METHYL-2(5H)FURANONE(40834-42-2)Related Product Information
- Ethyl furaneol
- 5-HYDROXY-4-METHYL-2(5H)FURANONE
- Atractylenolide III
- 3-CHLORO-4-(DICHLOROMETHYL)-5-HYDROXY-2(5H)-FURANONE
- Homofuraneol
- 3-Hydroxy-4-methyl-5-ethyl-2(5H)furanone
- 4-HYDROXY-5-METHYL-3(2H)-FURANONE FEMA NO.3635
- 4-HYDROXY-5-METHYL-3(2H)-FURANONE,norfuraneol,4-hydroxy-5-methyl-3-(2H)-furanone
- 4-Hydroxy-5-methyl-2(5H)-furanone
- Isotretinoin
- 4-METHYL-2(5H)-FURANONE
- CI 1020
- 2-HYDROXY-5-OXO-2,5-DIHYDRO-FURAN-3,4-DICARBOXYLIC ACID DIMETHYL ESTER
- MANOALIDE
- LUFFARIELLOLIDE
- 3-chloro-4-(chloromethyl)-5-hydroxy-2(5H)-furanone
- 4-(CHLOROMETHYL)-5-HYDROXY-2(5H)-FURANONE
- RUBRATOXINA