Allyl ether Chemical Properties

Melting point:

-6°C

Boiling point:

94 °C

Density 

0.803 g/mL at 25 °C(lit.)

refractive index 

1.415-1.417

Flash point:

-7 °C

storage temp. 

Refrigerator (+4°C) + Flammables area

solubility 

Chloroform, Methanol (Slightly), 0.3% soluble in water, miscible with alcohol and oils.

form 

clear liquid

color 

Colorless to Almost colorless

Odor

Pungent odor, reminiscent of Radish

Water Solubility 

insoluble

Merck 

14,292

CAS DataBase Reference

557-40-4(CAS DataBase Reference)

NIST Chemistry Reference

(CH2=CHCH2)2O(557-40-4)

EPA Substance Registry System

1-Propene, 3,3'-oxybis- (557-40-4)

Safety Information

Hazard Codes 

Xn-F,Xn,F

Risk Statements 

36/37/38-20/21/22-11

Safety Statements 

9-36/37/39-33-26-16-45

RIDADR 

2360

WGK Germany 

3

RTECS 

KN7525000

HS Code 

2909.19.1800

HazardClass 

3.1

PackingGroup 

II

Toxicity

LD50 orally in rats: 0.32 g/kg (Smyth)

MSDS

• Language:English Provider:ACROS

Allyl ether Usage And Synthesis

Chemical Properties

clear colorless liquid

Uses

Allyl Ether is a modifier used in the manufacture of foamable polystyrene.

General Description

A liquid with an odor of radishes. Less dense than water. Flash point 20°F. May be toxic by ingestion, skin absorption, and inhalation, and may irritate skin and eyes. Vapors heavier than air. Used to make other chemicals.

Air & Water Reactions

Highly flammable. Soluble in water. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154].

Reactivity Profile

Ethers, such as DIALLYLETHER can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.

Health Hazard

TOXIC; may be fatal if inhaled, ingested or absorbed through skin. Inhalation or contact with some of these materials will irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.

Fire Hazard

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

Toxicology

Diallyl Ether smells like horseradish and severely irritates the mucous membranes; the LD50 is approximately 270 mg/kg (rat, oral). Diallyl ether is absorbed easily through the skin; the LD50 is 540 mg/kg (rabbits, dermal, estimate).

Safety Profile

Poison by ingestion. Moderately toxic by skin contact. A skin and eye irritant. A dangerous fire hazard when exposed to heat, flame, or oxidzing materials. To fight fire, use alcohol foam. Reacts with air to form explosive peroxides. Violent explosions have occurred during distillation. When heated to decomposition it emits acrid smoke and fumes. See also ALLYL COMPOUNDS and ETHERS.

Synthesis

Allyl ether is produced by dehydration of Allyl alcohol.

Allyl ether(557-40-4)Related Product Information

• PETROLEUM ETHER
• S-Bioallethrin
• Diallylamine
• 2-Butoxyethanol
• Ethylbenzene
• DI(PROPYLENE GLYCOL) BUTYL ETHER
• 1,5-HEXADIENE
• n-Propyl ether
• Dimethyl ether
• Allyl bromide
• Pyriproxyfen
• Allyl chloride
• Allethrin
• Sodium allylsulfonate
• Diallyldisulfide
• ETHYLENE GLYCOL ALLYL ETHER
• GLYCIDYL ALLYL ETHER
• Diethyl ether