Warfarin Property

Melting point:

162-164 °C(lit.)

Boiling point:

356°C

Density 

1.1411 (rough estimate)

vapor pressure 

0.09 at 22 °C (NIOSH, 1997)

refractive index 

1.4434 (estimate)

Flash point:

2℃

storage temp. 

2-8°C

solubility 

Soluble in benzene, 1,4-dioxane (Weast, 1986), and acetone (Sax and Lewis, 1987). Moderately soluble in methanol, ethanol, isopropanol, and some oils (Windholz et al., 1983). Also soluble in toluene.

pka

pKa 4.90±0.01(H2O t = 25±0.5 I = 0.15 (KCl))(Approximate)

form 

Crystalline

color 

Colorless

Odor

odorless

Water Solubility 

Practically insoluble

Merck 

13,10097

BRN 

8868198

Exposure limits

NIOSH REL: TWA 0.1 mg/m3, IDLH 100 mg/m3; OSHA PEL: 0.1 mg/m3; ACGIH TLV: TWA 0.1 mg/m3.

LogP

2.600

CAS DataBase Reference

81-81-2(CAS DataBase Reference)

NIST Chemistry Reference

3-(Alpha-acetonylbenzyl)-4-hydroxycoumarin(81-81-2)

EPA Substance Registry System

Warfarin (81-81-2)

Safety

Hazard Codes 

T,T+,Xn,F

Risk Statements 

61-48/25-52/53-28-21-36-20/21/22-11

Safety Statements 

53-45-61-52-36/37-28-26-16

OEB

D

OEL

TWA: 0.1 mg/m3

RIDADR 

UN 2811 6.1/PG 1

WGK Germany 

3

RTECS 

GN4550000

HazardClass 

6.1(a)

PackingGroup 

I

HS Code 

29322090

Hazardous Substances Data

81-81-2(Hazardous Substances Data)

Toxicity

EC50 (24-hour) for Daphnia magna 88.8 mg/L (Lilius et al., 1995); acute oral LD50 for rats 186 mg/kg (Hartley and Kidd, 1987), 3 mg/kg (RTECS, 1985)

IDLA

100 mg/m3

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H372Causes damage to organs through prolonged or repeated exposure

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

Warfarin Chemical Properties,Usage,Production

Application in Ischemic Stroke

Warfarin is the antithrombotic agent of first choice for secondary prevention in patients with atrial fibrillation and a presumed cardiac source of embolism.

Description

Warfarin is tasteless and colorless. It is a widely used as anticoagulant (which stops the blood clotting) in the treatment and prevention of thrombosis, in the treatment for chronic atrial fibrillation, mechanical valves, pulmonary embolism, and dilated cardiomyopathy. Warfarin is metabolized primarily via oxidation in the liver by CYP2C9, and exerts its anticoagulant effect by inhibiting the protein vitamin K epoxide reductase complex, subunit 1 (VKORC1). Warfarin therapy can be associated with significant bleeding complications. Achieving a safe therapeutic response can be difficult because of warfarin’s narrow therapeutic index and great individual variability in the dose required, which is mostly a consequence of individual genetic variants: it is influenced by ageing, co-prescribed drugs, diet, alcohol consumption, and comorbid conditions. To maintain a therapeutic level of anti-thrombosis and to minimize the risk of bleeding complications, warfarin therapy requires intensive monitoring via the INR to guide its dosing. It is also used as the first generation of anticoagulant rodenticides.

References

[1] Simon Sanderson, Jon Emery, Julian Higgins (2005) CYP2C9 gene variants, drug dose, and bleeding risk in warfarin-treated patients: A HuGEnetTM systematic review and meta-analysis, 7, 97-104
[2] http://npic.orst.edu/factsheets/rodenticides.html
[3] http://emedicine.medscape.com/article/1733331-overview

Description

(±)-Warfarin (Item No. 13566) is a vitamin K antagonist, a coumarin derivative, and a racemic mixture of (+)-warfarin and (–)-warfarin . It is an anticoagulant that interferes with interconversion of vitamin K and vitamin K epoxide and the role of vitamin K in carboxylation of several clotting cascade proteins, inhibiting the initiation of clotting. Formulations containing warfarin have been used to treat and prevent blood clots in atrial fibrillation, heart valve replacement, venous thrombosis, and pulmonary embolism.

Description

Warfarin was the first of the synthetic anticoagulant rodenticides with structural features inspired by a natural product (88). This prototype coumarin derivative was developed in the 1940s by systematically altering the structure of dicumarol (46), recognized earlier as the causative agent of the sweet clover disease causing severe bleeding in grazing cattle (89). These rodenticides act by inhibiting the oxidoreductive recycling of vitamin K, a cofactor necessary for prothrombin synthesis involved in blood coagulation.

Chemical Properties

Colorless crystals; odorless; tasteless. Soluble in acetone, dioxane; slightly soluble in methanol, ethanol; very soluble in alkaline aqueous solution; insoluble in water and benzene.

Chemical Properties

Warfarin is a colorless, odorless crystalline solid.

Originator

Coumadin ,Endo,US,1954

Uses

Coumadin is widely used as an anticoagulant for various systemic diseases such as venous thromboembolism, cardiac arrhythmia, following myocardial infarction, and hematologic abnormalities, among others. However, the efficacy of coumadin for CRVO is not established. It was reported that 13 of 354 patients taking warfarin developed CRVO despite maintaining therapeutic levels of the anticoagulant.

Uses

Pesticide and rodenticide

Definition

ChEBI: 4-hydroxy-3-(3-oxo-1-phenylbutyl)-1-benzopyran-2-one is a member of the class of coumarins that is 4-hydroxycoumarin which is substituted at position 3 by a 1-phenyl-3-oxo-1-butyl group. It is a methyl ketone and a hydroxycoumarin.

Application

Warfarin is an anti-coagulant used to prevent heart attacks, strokes, and the formation of blood clots. It interferes with the use of vitamin K in the required carboxylation of several vitamin K-dependent proteins in the clotting cascade, preventing the initiating of clotting. (±)-Warfarin is a racemic mixture of 2 optically active isomers. (±)-Warfarin has a half-life of 36-42 hours in circulation, bound to plasma proteins, and accumulates in the liver, where the two isomers are metabolized by different pathways.

Manufacturing Process

About 0.1 mol each of 4-hydroxycoumarin and benzalacetone are dissolved, in any desired order, in about three times their combined weight of pyridine. The solution is refluxed for about 24 hours, and then allowed to cool; after which it is poured into about 15 volumes of water, and acidified to about pH 2 by the addition of hydrochloric acid. An oil separates, and on cooling and standing overnight solidifies. The solid product is recovered, as by filtration, and recrystallized from ethanol, according to US Patent 2,427,578.
The base melts at about 161°C. It is a white crystalline solid, soluble in hot ethyl alcohol and substantially insoluble in cold water; it dissolves in alkali solutions with formation of the salt. The yield is about 40%.
Then, as described in US Patent 2,777,859, warfarin may be reacted with NaOH to give a sodium salt solution. Crystalline warfarin sodium may be prepared as described in US Patent 2,765,321.

brand name

Athrombin- K (Purdue Frederick);Coumadine;Marevan;Mervan;Sofarin;Waran;Warfilone.

Therapeutic Function

Anticoagulant

World Health Organization (WHO)

Warfarin, a coumarin anticoagulant, was introduced into medicine in 1950 for the prevention and managementof thrombo-embolic disorders. Its use during the first trimester of pregnancy has been associated with birth malformations, particularly in relation to cranial and limb development, and there have been reports of foetal death due to haemorrhage following administration of the drug during the late stages of pregnancy. The decision of the Egyptian agency to requrie a warning regarding teratogenicity to be included in the approved information of products containing warfarin beings the text of the package insert in line with those approved in other countries. Warfarin is included in the WHO Model List of Essential Drugs.

Reactivity Profile

Warfarin is incompatible with the following: Strong oxidizers .

Health Hazard

Warfarin is classified as very toxic. Probable oral lethal dose in humans is 50-500 mg/kg, between 1 teaspoon and 1 ounce for a 150 lb. person. Material is an anticoagulant. Toxic effects other than hemorrhage are rarely seen in humans. Material is believed to be teratogenic in humans. Persons with a history of blood disorders with bleeding tendencies would be expected to be at increased risk from exposure.

Health Hazard

Highly toxic substance; exhibits acute,delayed and chronic effects. Ingestion of adose of 3–15 g is thought to be fatal toadult human. It is an anticoagulant causinghemorrhage. The toxic symptoms whichbegin a few days or weeks after ingestioninclude bleeding of nose and gums, pallorand blood in the urine and feces. Anothersymptom may be hematomas around jointsand hip. If the dose is large or lethalthe delayed effects may lead to cerebralhemorrhage, paralysis and death. It exhibitedteratogenic effects in laboratory animals.The LD50 values reported in the literaturewidely vary.

Fire Hazard

Contact with strong oxidizers may cause fires and explosions. Toxic gases and vapors (e.g., carbon monoxide) may be released in heating to decomposition. Avoid strong oxidizers.

Agricultural Uses

Rodenticide: Warfarin and its sodium salt is an anticoagulant rodenticide used for controlling rats and house mice in and around homes, animal and agricultural premises, and commercialand industrial sites. It is effective in very low dosages. About a week is required before a marked reduction in the rodent population is noticeable. Rodents do not become bait-shy after once tasting warfarin; they continue to consume it until its anti-clotting properties have produced death through internal hemorrhaging. It can be used year-after-year wherever a rodent problem exists. Warfarin and its sodium salt are only slightly dangerous to humans and domestic animals when used as directed, but care must be taken with young pigs, which are especially susceptible. The sodium salt is also used to treat people with blood hypercoagulation problems. Registered for use in EU countries . Registered for use in the U.S.

Pharmaceutical Applications

A group of naturally occurring antibiotics chemically related to the coumarin group of anticoagulants. The best known is novobiocin, but a few naturally occurring coumarins and some semisynthetic derivatives have been studied. They share a narrow range of antimicrobial activity largely directed against aerobic Gram-positive organisms. Novobiocin inhibits susceptible strains of Staph. aureus (including β-lactamaseproducing and methicillin-resistant strains), Str. pyogenes and Str. pneumonia at a concentration of 0.1–2 mg/L and it has been considered for the treatment of infection with multiresistant Staph. aureus and other Gram-positive cocci. However, since resistance arises readily and side effects are common, the general consensus is that it no longer has a place in antibacterial therapy.
There has been some revived interest in coumarins as potentiating agents of antineoplastic drugs.

Trade name

ARAB RAT DETH®; ATROMBINE-K®; BRUMIN®; COMPOUND 42®; D-CON®; CO- RAX®; DETHMORE®; EAGLES-7®; EASTERN STATES DUOCIDE®; GROVEX SEWER BAIT®; HOPKINS BAR BAIR®; HOPKINS COV-R-TOX®; HOPKINS RODEX®; KILLGERM SEWARIN P®; KILMOL®; LIQUA-TOX®; MAR-FIN®; MOUSE PAK®; PLUSBAIT®; RAT-A-WAY®; RAT-B-GON®; RAT-O-CIDE®; RAT-GARD®; RAT & MICE BAIT®; RATRON®; RATS-NO-MORE®; RATTUNAL®; RAX®; RCR SQUIRREL KILLER®; RENTOKIL®; RENTOKIL BIOTROL®; RODEX BLOX®; RODENTEX®; RO- DETH®; RODEX®; ROUGH & READY MOUSE MIX®; SAKARAT®; SOLFARIN®; SOREXA PLUS®; SOREX CR1®; SEWARIN®; SPRAY-TROL BRANCH®; TWIN LIGHT RAT AWAY®; RODEN-TROL®; WARFARAT®; WARF COMPOUND®; VAMPIRINIP® Sodium Salt: ATHROMBIN®; LIQUA-TOX®; PANWARFIN®; RATSUL SOLUBLE®; TINTORANE®; VARFINE®; WARAN®; WARCOUMIN®; WARFILONE®

Mechanism of action

Warfarin sodium is rapidly and completely absorbed (~100% bioavailability) following oral, intramuscular, intravenous, or rectal administration. Peak plasma concentrations occur at approximately 3 hours. Its anticoagulant effect is not immediately present, however, following initiation of therapy. Instead, a delay in onset of anticoagulation occurs while the clotting factors with normal activity are cleared and those that have not been carboxylated because of the actions of warfarin reach physiologically significant levels. On average, this delay is approximately 5 hours for factor V turnover and 2 to 3 days for factor II (thrombin). Consequently, because of the rapid decline in protein C levels, the anticoagulated state frequently is preceded by a period of hypercoagulability (25).
Warfarin also is highly protein bound (95–99%) and, as a result, has numerous interactions with other drugs. The free drug (i.e., that not bound to plasma proteins) is the active constituent. Therefore, any other substance that displaces bound drug from protein binding sites increases the levels of free drug and, as a result, can cause warfarin toxicity, which usually is manifested by hemorrhage. The volume of distribution(Vd) is quite small (0.1–0.2 L/kg), and the plasma half-life is quite long, both of which presumably result from the high degree of plasma protein binding.

Pharmacokinetics

Warfarin sodium is rapidly and completely absorbed (~100% bioavailability) following oral, intramuscular, intravenous, or rectal administration. Peak plasma concentrations occur at approximately 3 hours. Its anticoagulant effect is not immediately present, however, following initiation of therapy. Instead, a delay in onset of anticoagulation occurs while the clotting factors with normal activity are cleared and those that have not been carboxylated because of the actions of warfarin reach physiologically significant levels. On average, this delay is approximately 5 hours for factor V turnover and 2 to 3 days for factor II (thrombin). Consequently, because of the rapid decline in protein C levels, the anticoagulated state frequently is preceded by a period of hypercoagulability (25).
Warfarin also is highly protein bound (95–99%) and, as a result, has numerous interactions with other drugs. The free drug (i.e., that not bound to plasma proteins) is the active constituent. Therefore, any other substance that displaces bound drug from protein binding sites increases the levels of free drug and, as a result, can cause warfarin toxicity, which usually is manifested by hemorrhage. The volume of distribution(Vd) is quite small (0.1–0.2 L/kg), and the plasma half-life is quite long, both of which presumably result from the high degree of plasma protein binding.

Safety Profile

A human poison by ingestion. Poison by inhalation and intravenous routes. Moderately toxic by skin contact, subcutaneous, and intraperitoneal routes. Human systemic effects by ingestion: hemorrhage, ulceration or bleeding from small intestine, blood clotting factor change. Human reproductive effects by ingestion and intramuscular routes: fetal death and physical abnormalities at birth. Human teratogenic effects include developmental abnormalities of the craniofacial area, musculoskeletal system, and respiratory system. An experimental teratogen. Other experimental reproductive effects. Used as an oral anticoagulant and as a rodenticide. When heated to decomposition it emits acrid smoke and fumes.

Synthesis

Warfarin, 3-(|á-acetonylbenzyl)-4-hydroxycoumarin (24.1.10), is synthesized via Michael reaction by attaching 4-hydroxycoumarin (24.1.7) to benzalacetone in the presence of pyridine.

Potential Exposure

Warfarin is used as an oral anticoagulant and as a rodenticide or rat poison.

Carcinogenicity

No data suggest that warfarin is either mutagenic or carcinogenic.

Environmental Fate

Photolytic. Warfarin may undergo direct photolysis since the pesticide showed an absorption maximum of 330 nm (Gore et al., 1971)
Chemical/Physical. The hydrolysis half-lives at 68.0°C and pH values of 3.09, 7.11 and 10.18 were calculated to be 12.9, 57.4 and 23.9 days, respectively. At 25°C and pH 7, the half-life was estimated to be 16 years (Ellington et al., 1986)

Metabolic pathway

The metabolism of warfarin in rat, man and other species has been studied in depth, mainly because of its use in anti-coagulant therapy to prevent thrombo-embolic disease. Having one chiral centre the molecule exists as R and S enantiomers but it is used in rodent control as the racemate. The S isomer is about six times more effective than the A isomer as judged by a single oral dose to the rat and using prothrombin time (clotting time) as a measure. The interaction of warfarin at its receptor, vitamin K₁ epoxide reductase (see Overview), is completely nonstereoselective, suggesting that the 4-hydroxycoumarin ring system binds with the enzyme. Absorption is also non-selective and, therefore, the differential efficacy must be related to metabolism and disposition.
Warfarin is metabolised by aryl hydroxylation, alkyl hydroxylation and keto-reduction. The regioselective hydroxylation is catalysed by different isozymes of cytochrome P450 and warfarin has been used extensively as a probe for these enzymes.
Metabolism studies on soils and plants do not appear to have been reported. This is due to the use pattern of the compound (see Overview). Most aspects of the medical use of warfarin have been reviewed by Sutcliffe et ul. (1987). Mention should also be made of the work of Trager and co-workers (Black et ul., 1996, and earlier papers) on the chemistry and metabolism (particularly in man) of warfarin. This group has also conducted several of the many studies on potential warfarin-drug interactions.

Metabolism

Warfarin and other coumarin derivatives undergo extensive hepatic oxidative metabolism catalyzed by CYP2C9 isozyme to give 6- and 7-hydroxywarfarins as the major inactive metabolites. Warfarin also undergoes, to a lesser extent, reductive metabolism of the ketone on the C-3 side chain to a pair of pharmacologically active, diastereomeric 2-hydroxywarfarins). Almost no unchanged drug is excreted in the urine. As expected, those individuals with compromised hepatic function are at greater risk for warfarin toxicity secondary to diminished clearance. Many of the drug–drug interactions are associated with enhanced or inhibited metabolism of warfarin via CYP2C9 induction or inhibition. Many additional drugs and conditions have profound effects on warfarin therapy. A partial list of these factors is shown in Table 31.2.

Shipping

UN3027 Coumarin derivative pesticides, solid, toxic, Hazard Class: 6.1; Labels: 6.1-Poisonous materials. UN2811 Toxic solids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required.

Purification Methods

dl-Warfarin crystallises from EtOH or MeOH. UV: max at 308nm ( 13,610) in H2O. The acetate has m 117-118o, the O-triflate has m 90-91o, and the 2,4-dinitrophenylhydrazone has m 215-216o. It is an effective anticoagulant and rodenticide. [West et al. J Am Chem Soc 83 2676 1961, HPLC: Banfield & Rowland J Pharm Sci 72 921 1983, Beilstein 17 III/IV 6794.] dl-Warfarin is resolved via recrystallisation of the quinidine salt, and the free acids are recrystallised (70g) from 600mL of 80% aqueous Me2CO. Large prismatic crystals of the pure enantiomers are obtained by slow crystallisation from Me2CO or AcOH. The solubilities of the pure enantiomers at 25o are 11.2% in Me2CO and 2.6% in AcOH, whereas the racemate has solubilities of 6.5% in Me2CO and 2% in AcOH. The IR spectra are the same with max (CHCl3) at 2.78 (w), 5.88, 6.16 and 6.38. [West et al. J Am Chem Soc 83 2676 1961, Cbz-proline diastereoisomeric esters were used for HPLC analysis: Banfield & Rowland J Pharm Sci 72 921 1983.] Poisonous, anticoagulant and rodenticide.

Degradation

Warfarin is a very weak acid which forms alkali metal salts when dissolved in base. Studies have indicated that, as well as existing in the open chain form (illustrated above), warfarin may exist as a cyclic hemiketal, particularly in a lipid environment (see Park, 1988).

Incompatibilities

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Dust mixtures with air may cause explosion.

Waste Disposal

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform to EPA regulations governing storage, transportation, treatment, and waste disposal. Incineration.