Dibutyl phosphate Property

Melting point:

-13 °C

Boiling point:

250 °C

Density 

1.06 g/mL at 20 °C (lit.)

vapor pressure 

0Pa at 20℃

refractive index 

n20/D 1.428

Flash point:

188 °C

storage temp. 

Store below +30°C.

solubility 

Chloroform (Soluble), Methanol (Slightly)

pka

1.53±0.50(Predicted)

form 

Liquid

Specific Gravity

1.1

color 

Clear

Water Solubility 

insoluble

BRN 

607224

Exposure limits

ACGIH: TWA 5 mg/m3 (Skin)
OSHA: TWA 1 ppm(5 mg/m3)
NIOSH: IDLH 30 ppm; TWA 1 ppm(5 mg/m3); STEL 2 ppm(10 mg/m3)

InChIKey

JYFHYPJRHGVZDY-UHFFFAOYSA-N

LogP

-0.9 at 25℃

CAS DataBase Reference

107-66-4(CAS DataBase Reference)

EPA Substance Registry System

Dibutyl phosphate (107-66-4)

Safety

Hazard Codes 

Xi,C

Risk Statements 

37/38-41-38-34-40

Safety Statements 

26-39-45-36/37/39-25

RIDADR 

3261

OEB

B

OEL

TWA: 1 ppm (5 mg/m3), STEL: 2 ppm (10 mg/m3)

WGK Germany 

1

RTECS 

TB9605000

TSCA 

Yes

HazardClass 

8

PackingGroup 

III

HS Code 

29199000

Hazardous Substances Data

107-66-4(Hazardous Substances Data)

IDLA

30 ppm

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

H351Suspected of causing cancer

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Dibutyl phosphate Chemical Properties,Usage,Production

Description

Dibutyl phosphate is a pale amber to brown,odorless liquid. Molecular weight = 210.24; Specificgravity (H2O:1) = 1.06; Boiling point = (decomposes)135-138℃; Freezing/Melting point = 213℃; Vapor pressure-1 mmHg at 20℃; Flash point = 188℃ (oc);Autoignition temperature = 420℃. Hazard Identification(based on NFPA-704 M Rating System): Health 3,Flammability 2, Reactivity 0. Practically insoluble in water.

Chemical Properties

Dibutyl phosphate is a pale amber to brown, odorless liquid. It is used as a catalyst for cross-linking in the paint industry and antistatics for the textile industry. It is stable in neutral, acidic or alkaline solution, and is classified as "not readily biodegradable" but inhererently biodegradable.The half-life time of 4.99 years is estimated for the degradation of dibutyl phosphate in air by the reaction with photochemically produced OH radicals. (MITI, Japan).

Uses

Pale amber liquid

Uses

Dibutyl phosphate is used as a plasticizer for polymer system and hydraulic fluid directly and used as a catalyst for cross-linking in paint industry. It is used as an antifoam agent in ore separation process and as an antistatic agent in the textile industry. It can be used as a precursor for antistatics, as a mould release agent in polyurethane applications and, as a non volatile acidic catalyst soluble in organic media.

Definition

ChEBI: Dibutyl phosphate is a dialkyl phosphate.

General Description

Pale-amber odorless liquid. Mp: -13°C, bp: 135-138°C. Density: 1.06 g cm-3. Moderately soluble in water (18 g / L at 20°C).

Reactivity Profile

Dibutyl phosphate Is non-flammable, but combustible (flash point 188°C). Auto-ignition temperature is 420°C. Emits irritating or toxic fumes in a fire. Is a moderately strong acid obtained by the partial esterification of phosphoric acid. Reacts exothermically and vigorously with bases. Incompatible with strong oxidizing agents, alkali metals, heat, or plastic. Reacts with many metals liberating flammable/explosive hydrogen gas.

Health Hazard

Dibutyl phosphate is an irritant of the eyes and mucous membranes.

Flammability and Explosibility

Non flammable

Safety Profile

Moderately toxic by ingestion. When heated to decomposition it emits toxic fumes of POx. See also PHOSPHATES.

Potential Exposure

This material is used as a catalyst in organic synthesis.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theDibutyl phosphate 901skin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. If victim is conscious, administer water ormilk. Do not induce vomiting.

storage

Color Code—White: Corrosive or Contact Hazard;Store separately in a corrosion-resistant location. Prior toworking with this chemical you should be trained on its properhandling and storage. Dibutyl phosphate must be stored toavoid contact with strong oxidizers, such as chlorine, chlorinedioxide, and bromine, since violent reactions occur.

Shipping

UN1760 Corrosive liquids, n.o.s., Hazard class: 8; Labels: 8-Corrosive material, Technical Name Required. UN3261 Corrosive solid, acidic, organic, n.o.s., Hazard class: 8; Labels: 8-Corrosive material, Technical Name Required.

Incompatibilities

Dibutyl phosphate is a medium strong acid. Incompatible with oxidizers (chlorates, nitrates, per- oxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Attacks many metals forming flammable and explosive hydrogen gas. Attacks some plas- tics, rubber, and coatings.