Xylene Precision Distillation for separation of O-xylene and p-xylene Chemical properties Uses Production method Category Toxicity grading Acute toxicity EXPLOSIVES and HAZARDOUS CHARACTERISTICS Flammability and Hazardous characteristics Storage and transportation characteristics Fire extinguishing agent Occupational Standard
ChemicalBook > CAS DataBase List > o-Xylene

o-Xylene

Xylene Precision Distillation for separation of O-xylene and p-xylene Chemical properties Uses Production method Category Toxicity grading Acute toxicity EXPLOSIVES and HAZARDOUS CHARACTERISTICS Flammability and Hazardous characteristics Storage and transportation characteristics Fire extinguishing agent Occupational Standard
Product Name
o-Xylene
CAS No.
95-47-6
Chemical Name
o-Xylene
Synonyms
XYLENES;1,2-DIMETHYLBENZENE;XYLOL;1,2-Xylene;o-Xylol;YLENE;ORTHO-XYLENE;2-methyltoluene;o-Dimethylbenzene;2-xylene
CBNumber
CB1854693
Molecular Formula
C8H10
Formula Weight
106.17
MOL File
95-47-6.mol
More
Less

o-Xylene Property

Melting point:
-26--23 °C (lit.)
Boiling point:
143-145 °C (lit.)
Density 
0.879 g/mL at 20 °C (lit.)
vapor density 
3.7 (vs air)
vapor pressure 
<0.1 atm ( 21.1 °C)
refractive index 
n20/D 1.505(lit.)
Flash point:
90 °F
storage temp. 
Store below +30°C.
solubility 
water: partially soluble0.1705 g/L at 25°C
form 
Solid or Crystalline Powder
pka
>15 (Christensen et al., 1975)
color 
Yellow to beige
Odor
Benzene-like; characteristic aromatic.
Odor Threshold
0.38ppm
explosive limit
1.0-7.6%(V)
Water Solubility 
Sparingly soluble in water. (0.2g/L)
λmax
λ: 288 nm Amax: 1.00
λ: 300 nm Amax: 0.40
λ: 325 nm Amax: 0.05
λ: 350-400 nm Amax: 0.01
Merck 
14,10081
BRN 
1815558
Henry's Law Constant
14.0 at 45.00 °C, 16.4 at 50.00 °C, 19.0 at 55.00 °C, 21.3 at 60.00 °C, 26.3 at 70.00 °C (static headspace-GC, Park et al., 2004)
Exposure limits
NIOSH REL: 100 ppm (435 mg/m3), STEL 150 ppm (655 mg/m3), IDLH 900 ppm; OSHA PEL: TWA 100 ppm; ACGIH TLV: TWA 100 ppm, STEL 150 ppm (adopted).
Dielectric constant
2.5699999999999998
Stability:
Stable. Incompatible with oxidizing agents. Flammable. Hygroscopic.
InChIKey
CTQNGGLPUBDAKN-UHFFFAOYSA-N
LogP
3.16 at 20℃
CAS DataBase Reference
95-47-6(CAS DataBase Reference)
NIST Chemistry Reference
Benzene, 1,2-dimethyl-(95-47-6)
EPA Substance Registry System
o-Xylene (95-47-6)
More
Less

Safety

Hazard Codes 
Xn,T,F
Risk Statements 
10-20/21-38-39/23/24/25-23/24/25-11
Safety Statements 
25-45-36/37-16-7
RIDADR 
UN 1307 3/PG 3
WGK Germany 
2
RTECS 
ZE2450000
Autoignition Temperature
867 °F
TSCA 
Yes
HazardClass 
3
PackingGroup 
II
HS Code 
29024100
Hazardous Substances Data
95-47-6(Hazardous Substances Data)
Toxicity
Acute oral LD50 in rats is approximately 5 g/kg (quoted, RTECS, 1992).
IDLA
900 ppm
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Danger
Hazard statements

H226Flammable liquid and vapour

H304May be fatal if swallowed and enters airways

H315Causes skin irritation

H335May cause respiratory irritation

H412Harmful to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P331Do NOT induce vomiting.

More
Less

N-Bromosuccinimide Price

Sigma-Aldrich
Product number
XX0020
Product name
o-Xylene
Purity
Reagent
Packaging
4L
Price
$364
Updated
2024/03/01
Sigma-Aldrich
Product number
8.08697
Product name
o-Xylene
Purity
for synthesis
Packaging
1L
Price
$123
Updated
2024/03/01
Sigma-Aldrich
Product number
8.08697
Product name
o-Xylene
Purity
for synthesis
Packaging
2.5L
Price
$233
Updated
2024/03/01
Sigma-Aldrich
Product number
8.08697
Product name
o-Xylene
Purity
for synthesis
Packaging
10L
Price
$552
Updated
2024/03/01
Sigma-Aldrich
Product number
40201
Product name
o-Xylene solution
Purity
certified reference material, 5000?μg/mL in methanol
Packaging
1mL
Price
$63.8
Updated
2024/03/01
More
Less

o-Xylene Chemical Properties,Usage,Production

Xylene

Xylene refers to the aromatic hydrocarbon with the two hydrogen atoms on the benzene ring being substituted by two methyl groups. It has three isomers o-xylene (1, 2-Dimethylbenzene), m-xylene and p-xylene. The industrial products are the mixtures of the three isomers with 10% o-10%, 70% m-, and 20% p-. In the coking industry, it is one of crude benzene refined products.
Xylene is a kind of colorless flammable liquid; the melting point of o-, m-and p-xylene is-25.2 ℃,-47.9 ℃ and 13.3 ℃; the boiling points are respectively 144.4 ℃, 139.1 ℃ and 138.3 ℃ while the relative density is 0.8802, 0.8642 and 0.8611, respectively; It is not soluble in water but miscible with many kinds of organic solvents immiscibility. Upon catalytic oxidation, they respectively, generate phthalic anhydride, isophthalic acid and terephthalic acid.
Xylene is one kind of important raw materials of organic chemicals, naturally existing in coal tar and some kinds of petroleum. It can be obtained through the fractionation of the light oil part of the coal tar or catalytic reforming light gasoline. Industry mainly performs extracting using the C8 fraction in the naphtha reformates. It can be alternatively manufactured through the disproportionation reaction of toluene in the presence of catalyst and high temperature, high pressure. At present time, industry mainly applies the method of cryogenic crystallization, adsorption and formation of complexes or molecular sieves to separate them. O-xylene has a relatively high boiling point, being able to be separated using distillation. p-xylene also has a high melting point and can be purified through fractional crystallization purification. Mixed xylene without separation can be directly used as a solvent with being supplemented to the gasoline capable of improving the anti-explosive properties. They are components of aviation gasoline. O-xylene is mainly used for the preparation of phthalic anhydride, which is an important raw material for the manufacture of a variety of dyes and indicators (such as phenolphthalein). In addition, o-xylene can also be used for preparation of polyester resin, insect repellent, plasticizers and dyes. M-xylene, through nitration and reduction, can generate 4, 6-dimethyl-1, 3-phenylenediamine that is the intermediate for synthetic dyes. M-xylene can also be used as the raw materials for synthetic fragrances (such as xylene musk). P-xylene is mainly used in the manufacture of terephthalic acid, which is an important raw material for synthetic polyester fiber (polyester).
 
Figure 1 the chemical structure of the three isomers of xylene, ortho-xylene, m-xylene, p-xylene chemical structure.
The above information is edited by Chemicalbook.

Precision Distillation for separation of O-xylene and p-xylene

Xylene is presented in coked crude benzene and petroleum cracked oil. Crude benzene, after initial distillation, sulfuric acid washing and distillation for separation of benzene and toluene, followed by distillation, we can obtain xylene, also known as coking xylene. The quality of the coked xylene depends on the separation capacity of the distillation column, the temperature at the top of the column and the reflux ratio. China has classified the coking xylene products into three levels. The coking xylene generally contains 16% if o-xylene, 50% of m-xylene, 21% of p-xylene and 7% of ethylbenzene. The xylene produced in the petroleum industry has a low content of m-xylene and a high content of ethylbenzene. Industrial xylene is not only the solvent and additive of rubber and coatings industry, but also the additives of aviation and power fuel. O-xylene, m-xylene and p-xylene separated from industrial xylene are the raw materials of phthalic acid, isophthalic acid and terephthalic acid, respectively. Phthalic acid and terephthalic acid are used in the production of plasticizers, polyester resins and polyester fibers. M-xylene can be used alone as solvent and fuel additives. The o-xylene contained in the industrial xylene has a over 5.2 ℃ difference with other isomers. With precision distillation, we can obtain o-xylene with a purity of over 95%, followed by using sulfonation and distillation for purification so we can get further purer o-xylene. 
Xylene belongs to Lewis base, which can form a polar complex with HF-BF3 (Lewis acid). The alkalinity of M-xylene is about 100 times as strong as that of other C8 aromatics. When the isomer mixture of xylene comes into contact with HF-BF3 solvent, m-xylene can form a complex with fluoride and is preferentially extracted into the fluoride phase. The m-xylene-containing fluoride phase is heated at a lower pressure to decompose the complex, thereby separating m-xylene from the mixture. HF-BF3 solvent can be recovered by distillation for recycling. If the raw material is a mixture of ortho-xylene, m-xylene and p-xylene, after the m-xylene is extracted, we can further use precision distillation to separate the o-xylene and p-xylene.

Figure 2 the precision distillation method for separation of o-xylene and p-xylene.

Chemical properties

It appears as colorless transparent liquid with aromatic odor. It is miscible with ethanol, ethyl ether, acetone and benzene but insoluble in water.

Uses

(1)  It is mainly used in the production of phthalic anhydride
(2)  O-xylene is the raw material for the production of germicide fenramine, tetrachlorophenyl peptide and the herbicide bensulfuron-methyl. It is used as intermediate for the manufacture of o-methyl benzoic acid.
(3)  It is mainly used as chemical raw materials and solvents. It can be used to produce phthalic anhydride, dyes, pesticides and drugs, such as vitamins. It can also be used as aviation gasoline additives.
(4)  Used as chromatographic standards and solvents
(5)  As raw materials of synthesis of anhydride and other organic synthesis;

Production method

Industry applied super-distillation method to separate out the o-xylene from the mixed xylene. O-xylene has a over 5 ℃ difference in the boiling point compared with other components in the mixed xylene. For the distillation, the required tray number is about 150; the reflux ratio being 5-8 and consume relative much energy.
O-xylene was originally produced mainly from coal tar. Currently most of the domestic and foreign production of o-xylene is mainly via extraction from oil catalytic reforming and thermal cracking of aromatic hydrocarbon. Owing to that the structures of o-xylene, p-xylene, and m-xylene in the xylene are very similar; their physical parameters are also quite similar. Industrial o-xylene separation mainly adopts super-distillation method; first separate out the o-xylene and ethylbenzene from the mixed xylene which demands the using of 100~150 tray distillation tower; followed by separation of o-xylene and ethylbenzene to obtain pure o-xylene.

Category

Flammable liquids

Toxicity grading

poisoning

Acute toxicity

Oral-rat LDL0: 5000 mg/kg; abdominal injection-mouse LD50: 1364 mg/kg

EXPLOSIVES and HAZARDOUS CHARACTERISTICS

being explosive when mixed with air

Flammability and Hazardous characteristics

being flammable upon flame, heat, oxidant Flammable with combustion releasing irritant smoke

Storage and transportation characteristics

warehouse: ventilated, low temperature and dry; gently load and unload; store it separately from oxidants and acids.

Fire extinguishing agent

mist water, foam, sand, carbon dioxide, 1211 extinguishing agent

Occupational Standard

TLV-TWA 100 PPM (440 mg/m 3); STEL 150; PPM (655 mg/m 3)

Chemical Properties

colourless liquid

Physical properties

Clear, colorless liquid with an aromatic odor. An odor threshold concentration of 380 ppbv was reported by Nagata and Takeuchi (1990).

Uses

Preparation of phthalic acid, phthalic anhydride, terephthalic acid, isophthalic acid; solvent for alkyd resins, lacquers, enamels, rubber cements; manufacture of dyes, pharmaceuticals, and insecticides; motor fuels.

Uses

o-Xylene is largely used in the production of phthalic anhydride, and is generally extracted by distillation from a mixed Xylene stream in a plant primarily designed for p-Xylene production.

Uses

Xylene, xylenes, and total xylenes are used interchangeably since xylene usually exists as a mixture of three isomers: 1,2-dimethylbenzene, 1,3-dimethylbenzene, and 1,4-dimethylbenzene, i.e., o-, m-, and p-xylene, and is usually used as a mixture of the three forms. The mixture often also contains ethylbenzene. It is a high volume industrial chemical used in the synthetic fiber, chemical and plastics industries and as a solvent, cleaning agent and thinner for paints and varnishes.

Definition

ChEBI: A xylene substituted by methyl groups at positions 1 and 3.

Synthesis Reference(s)

Journal of the American Chemical Society, 97, p. 7262, 1975 DOI: 10.1021/ja00858a011
The Journal of Organic Chemistry, 44, p. 2185, 1979 DOI: 10.1021/jo01327a032

General Description

A colorless watery liquid with a sweet odor. Less dense than water. Insoluble in water. Irritating vapor.

Air & Water Reactions

Highly flammable. Insoluble in water.

Reactivity Profile

1,2-Dimethylbenzene may react with oxidizing materials. .

Health Hazard

Vapors cause headache and dizziness. Liquid irritates eyes and skin. If taken into lungs, causes severe coughing, distress, and rapidly developing pulmonary edema. If ingested, causes nausea, vomiting, cramps, headache, and coma. Can be fatal. Kidney and liver damage can occur.

Fire Hazard

Behavior in Fire: Vapor is heavier than air and may travel considerable distance to a source of ignition and flash back.

Flammability and Explosibility

Flammable

Chemical Reactivity

Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Safety Profile

Moderately toxic bj7 intraperitoneal route. Mldly toxic by ingestion and inhalation. An experimental teratogen. A common air contaminant. A very dangerous fire hazard when exposed to heat or flame. Explosive in the form of vapor when exposed to heat or flame. To fight fire, use foam, CO2, dry chemical. Incompatible with oxidzing materials. When heated to decomposition it emits acrid smoke and irritating fumes. Emitted from modern building materials (CENEAR 69,22,91). See also other xylene entries.

Source

Detected in distilled water-soluble fractions of 87 octane gasoline (3.83 mg/L), 94 octane gasoline (11.4 mg/L), Gasohol (8.49 mg/L), No. 2 fuel oil (1.73 mg/L), jet fuel A (0.87 mg/L), diesel fuel (1.75 mg/L), military jet fuel JP-4 (1.99 mg/L) (Potter, 1996), new motor oil (16.2 to 17.5 μg/L), and used motor oil (294 to 308 μg/L) (Chen et al., 1994). The average volume percent and estimated mole fraction in American Petroleum Institute PS-6 gasoline are 2.088 and 0.01959, respectively (Poulsen et al., 1992). Schauer et al. (1999) reported o-xylene in a diesel-powered medium-duty truck exhaust at an emission rate of 830 μg/km. Diesel fuel obtained from a service station in Schlieren, Switzerland contained o-xylene at a concentration of 223 mg/L (Schluep et al., 2001).
California Phase II reformulated gasoline contained o-xylene at a concentration of 19.7 g/kg. Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without catalytic converters were 5.41 and 562 mg/km, respectively (Schauer et al., 2002).
Thomas and Delfino (1991) equilibrated contaminant-free groundwater collected from Gainesville, FL with individual fractions of three individual petroleum products at 24–25 °C for 24 h. The aqueous phase was analyzed for organic compounds via U.S. EPA approved test method 602. Average m+p-xylene concentrations reported in water-soluble fractions of unleaded gasoline, kerosene, and diesel fuel were 8.611, 0.658, and 0.228 mg/L, respectively. When the authors analyzed the aqueous-phase via U.S. EPA approved test method 610, average m+p-xylene concentrations in water-soluble fractions of unleaded gasoline, kerosene, and diesel fuel were lower, i.e., 6.068, 0.360, and 0.222 mg/L, respectively. Based on laboratory analysis of 7 coal tar samples, o-xylene concentrations ranged from 2 to 2,000 ppm (EPRI, 1990). A high-temperature coal tar contained o-xylene at an average concentration of 0.04 wt % (McNeil, 1983).
Schauer et al. (2001) measured organic compound emission rates for volatile organic compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission rate of o-xylene was 18.1 mg/kg of pine burned. Emission rates of o-xylene were not measured during the combustion of oak and eucalyptus.
Drinking water standard (final): For all xylenes, the MCLG and MCL are both 10 mg/L. In addition, a DWEL of 70 mg/L was recommended (U.S. EPA, 2000).

Environmental Fate

Biological. Reported biodegradation products of the commercial product containing xylene include α-hydroxy-p-toluic acid, p-methylbenzyl alcohol, benzyl alcohol, 4-methylcatechol, mand p-toluic acids (Fishbein, 1985). o-Xylene was also cometabolized resulting in the formation of o-toluic acid (Pitter and Chudoba, 1990). In anoxic groundwater near Bemidji, MI, o-xylene anaerobically biodegraded to the intermediate o-toluic acid (Cozzarelli et al., 1990). In gasolinecontaminated groundwater, methylbenzylsuccinic acid was identified as the first intermediate during the anaerobic degradation of xylenes (Reusser and Field, 2002).
Photolytic. Cox et al. (1980) reported a rate constant of 1.33 x 10-11 cm3/molecule?sec for the reaction of gaseous o-xylene with OH radicals based on a value of 8 x 10-12 cm3/molecule?sec for the reaction of ethylene with OH radicals.
Surface Water. The evaporation half-life of o-xylene in surface water (1 m depth) at 25 °C is estimated to be 5.18 h (Mackay and Leinonen, 1975).
Groundwater. Nielsen et al. (1996) studied the degradation of o-xylene in a shallow, glaciofluvial, unconfined sandy aquifer in Jutland, Denmark. As part of the in situ microcosm study, a cylinder that was open at the bottom and screened at the top was installed through a cased borehole approximately 5 m below grade. Five liters of water was aerated with atmospheric air to ensure aerobic conditions were maintained. Groundwater was analyzed weekly for approximately 3 months to determine o-xylene concentrations with time. The experimentally determined firstorder biodegradation rate constant and corresponding half-life following a 7-d lag phase were 0.1/d and 6.93 d, respectively.
Photolytic. When synthetic air containing gaseous nitrous acid and o-xylene was exposed to artificial sunlight (λ = 300–450 nm) biacetyl, peroxyacetal nitrate, and methyl nitrate formed as products (Cox et al., 1980). A n-hexane solution containing o-xylene and spread as a thin film (4 mm) on cold water (10 °C) was irradiated by a mercury medium pressure lamp. In 3 h, 13.6% of the o-xylene photooxidized into o-methylbenzaldehyde, o-benzyl alcohol, o-benzoic acid, and omethylacetophenone (Moza and Feicht, 1989). Irradiation of o-xylene at ≈ 2537 ? at 35 °C and 6 mmHg isomerizes to m-xylene (Calvert and Pitts, 1966). Glyoxal, methylglyoxal, and biacetyl were produced from the photooxidation of o-xylene by OH radicals in air at 25 °C (Tuazon et al., 1986a).
Chemical/Physical. Under atmospheric conditions, the gas-phase reaction of o-xylene with OH radicals and nitrogen oxides resulted in the formation of o-tolualdehyde, o-methylbenzyl nitrate, nitro-o-xylenes, 2,3-and 3,4-dimethylphenol (Atkinson, 1990). Kanno et al. (1982) studied the aqueous reaction of o-xylene and other aromatic hydrocarbons (benzene, toluene, m- and p-xylene, and naphthalene) with hypochlorous acid in the presence of ammonium ion. They reported that the aromatic ring was not chlorinated as expected but was cleaved by chloramine forming cyanogen chloride. The amount of cyanogen chloride formed increased at lower pHs (Kanno et al., 1982). In the gas phase, o-xylene reacted with nitrate radicals in purified air forming the following products: 5-nitro-2-methyltoluene and 6-nitro-2-methyltoluene, o-methylbenzaldehyde, and an aryl nitrate (Chiodini et al., 1993).

Purification Methods

o-Xylene (4.4Kg) is sulfonated by stirring for 4hours with 2.5L of conc H2SO4 at 95o. After cooling, and separating the unsulfonated material, the product is diluted with 3L of water and neutralised with 40% NaOH. On cooling, sodium o-xylene sulfonate separates and is recrystallised from half its weight of water. [A further crop of crystals is obtained by concentrating the mother liquor to one-third of its volume.] The salt is dissolved in the minimum amount of cold water, then mixed with the same amount of cold water, and with the same volume of conc H2SO4 and heated to 110o. o-Xylene is regenerated and steam distils. The distillate is saturated with NaCl, the organic layer is separated, dried and redistilled. [Beilstein 5 H 362, 5 I 179, 5 II 281, 5 III 807, 5 IV 917.]

More
Less

o-Xylene Suppliers

Mingwei (Shandong) Supply Chain Management Co., Ltd
Tel
1555-3101303 15553101303
Email
mingweichemical@163.com
Country
China
ProdList
323
Advantage
58
Guangdong Wengjiang Chemical Reagent Co., Ltd.
Tel
0751-2886766 13927870850
Fax
0751-2886756
Email
3001267247@qq.com
Country
China
ProdList
10079
Advantage
58
Shanghai Chemisci Technology Co., Ltd
Tel
021-58690851 15690882017
Email
1877080091@qq.com
Country
China
ProdList
7992
Advantage
58
Shanghai Ronghe Chemical Co. , Ltd.
Tel
18766949288
Email
276744338@qq.com
Country
China
ProdList
117
Advantage
58
Shanghai Aladdin Bio-Chem Technology Co.,LTD
Tel
400-6206333 18521732826;
Fax
021-50323701
Email
market@aladdin-e.com
Country
China
ProdList
24835
Advantage
65
Hubei coward Chemical Co., Ltd
Tel
13125172151 13125172151
Email
3508116617@qq.com
Country
China
ProdList
4561
Advantage
58
Jinan Lianshun Chemical Co. , Ltd.
Tel
18560243899 18560243899
Email
1475213661@qq.com
Country
China
ProdList
70
Advantage
58
Shandong Xiya Chemical Co., Ltd.
Tel
4009903999 13395398332
Fax
0539-6365991
Email
sales@xiyashiji.com
Country
China
ProdList
20811
Advantage
60
Shanghai Wohua Chemical Co., Ltd.
Tel
021-021-57681602-802-819 16621266837
Fax
57683062-808
Email
2851602436@qq.com
Country
China
ProdList
275
Advantage
58
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006608290; 18621169109
Fax
86-21-61259102
Email
market03@meryer.com
Country
China
ProdList
40241
Advantage
62
More
Less

View Lastest Price from o-Xylene manufacturers

Henan Fengda Chemical Co., Ltd
Product
o-Xylene 95-47-6
Price
US $100.00-1.00/KG
Min. Order
1KG
Purity
99%
Supply Ability
g-kg-tons, free sample is available
Release date
2023-12-24
Hebei Guanlang Biotechnology Co,.LTD
Product
o-Xylene 95-47-6
Price
US $9.00/KG
Min. Order
1KG
Purity
99.9
Supply Ability
1 ton
Release date
2023-06-01
Hebei Guanlang Biotechnology Co., Ltd.
Product
o-Xylene 95-47-6
Price
US $19.90/Kg/Drum
Min. Order
1KG
Purity
99%
Supply Ability
10 mt
Release date
2021-04-23

95-47-6, o-XyleneRelated Search:


  • 1,2-Xylene standard in Methanol
  • 1,2-Xylene
  • 1,2-DIMETHYLBENZENE
  • o-Xylene, 99%, Extra Dry, AcroSeal
  • AKOS BBS-00004266
  • XYLENES
  • XYLOL
  • O-XYLENE FOR SYNTHESIS
  • Xylene for analysis EMSURE 25 L
  • Xylene for analysis EMSURE 1 L
  • Xylene for analysis EMSURE 190 L
  • O-XYLENE REFERENCE SUBSTANCE FOR GAS CHR
  • Xylene for analysis EMSURE 10 L
  • o-Xylene, absolute, over Molecular sieve
  • Benzene,1,2-dimethyl
  • benzene,1,2-dimethyl-
  • o-Dimethylbenzene
  • o-Methyltoluene
  • o-Xylenes
  • o-Xylol
  • ORTHO-XYLENE
  • O-XYLENE
  • YLENE
  • ORHTO XYLENE
  • ORTHO XYLENE 98% MIN
  • O-XYLENE, 1X1ML, MEOH, 200UG/ML
  • O-XYLENE EXTRA PURE
  • O-XYLENE, 98%, SPECTROPHOTOMETRIC GRADE
  • O-XYLENE, 1X1ML, MEOH, 5000UG/ML
  • O-XYLENE, 5000MG, NEAT
  • O-XYLENE OEKANAL
  • O-XYLENE, 98%, HPLC GRADE
  • O-XYLENE, ANHYDROUS, 97%
  • O-XYLENE, STANDARD FOR GC
  • O-XYLENE GC STANDARD
  • O-XYLENE 99%
  • O-XYLENE 99+% GR
  • O-XyleneCertified
  • o-Xylene,SpectrophotometricGrade,96%min
  • o-Xylene,99%
  • o-Xylene (8CI)
  • o-Xylene, SuperDry, J&KSeal
  • o-Xylene( 99%, HyDry, Water≤50 ppm (by K.F.))
  • o-Xylene, 99%, HyDry( with molecular sieves, Water≤50 ppm (by K.F.))
  • o-XYLENE, 97%o-XYLENE, 97%o-XYLENE, 97%
  • ortho-xylene、1,2-dimethylbenzene
  • o-Xylene, pure, 99%
  • o-xylene solution
  • o-xylene, hplc grade
  • o-xylene, spectrophotometric grade
  • O-XYLENE,REAGENT
  • 0-Xylene
  • ORTHO-DIMETHYLBENZENE
  • o-Xylene, HPLC Grade, 96% min
  • o-Xylene (1mg/ml in Methanol) [for Water Analysis]
  • O-XYLENE, 99%, PURE
  • o-Xylene, Hplc Grade Min
  • 1,2-Xylene Standard