Di-n-butyl ether Property

Melting point:

-98 °C (lit.)

Boiling point:

142-143 °C (lit.)

Density 

0.764 g/mL at 25 °C (lit.)

vapor density 

4.48 (vs air)

vapor pressure 

4.8 mm Hg ( 20 °C)

refractive index 

n20/D 1.399(lit.)

Flash point:

77 °F

storage temp. 

Store at <= 20°C.

solubility 

H2O: soluble0.113g/L at 20°C

form 

Liquid

color 

Clear colorless

PH

5.2 (0.2g/l, H2O, 20℃)

Relative polarity

1.7

Odor

Mild, ether-like.

PH Range

5.2

explosive limit

0.9-8.5%(V)

Water Solubility 

0.03 g/100 mL (20 ºC)

Merck 

14,1569

BRN 

1732752

Dielectric constant

3.1（25℃）

Stability:

Stable. Flammable. May form peroxides in storage. Incompatible with strong oxidizing agents.

InChIKey

DURPTKYDGMDSBL-UHFFFAOYSA-N

LogP

3.35

CAS DataBase Reference

142-96-1(CAS DataBase Reference)

NIST Chemistry Reference

n-Butyl ether(142-96-1)

EPA Substance Registry System

Butyl ether (142-96-1)

Safety

Hazard Codes 

Xi

Risk Statements 

10-36/37/38-52/53

Safety Statements 

61-24/25

RIDADR 

UN 1149 3/PG 3

WGK Germany 

2

RTECS 

EK5425000

Autoignition Temperature

365 °F

Hazard Note 

Irritant

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29091990

Hazardous Substances Data

142-96-1(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 7.4 g/kg (Smyth)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H226Flammable liquid and vapour

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

H412Harmful to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P240Ground/bond container and receiving equipment.

P273Avoid release to the environment.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Di-n-butyl ether Chemical Properties,Usage,Production

Description

Butyl ether (dibutyl ether) is a colorless, stable liquid, with a mild ether-like odor. It is immiscible with water, with a specific gravity of 0.8, which is lighter than water. Butyl ether is a moderate fire risk and will form explosive peroxides on aging. Flammable range is 1.5%–7.6% in air, with a boiling point of 286°F (141°C) and a flash point of 77°F (25°C). Ignition temperature is 382°F (194°C), and the vapor density is 4.5, which is heavier than air. In addition to flammability, butyl ether is toxic on prolonged inhalation. The four-digit UN identification number is 1149. The NFPA 704 designation is health 2, flammability 3, and reactivity 1. The primary use is as a solvent.

Chemical Properties

Di-n-butyl ether is a flammable, colorless liquid with a mild, ethereal odor.

Chemical Properties

Di-n-butyl ether is colourless liquid with ether-like odour

Uses

Butyl ether is used mainly as a solvent for organic materials such as resins, oils, hydrocarbons, esters, gums, and alkaloids. It is also used as an extracting agent in metal separation, as a reacting medium in organic synthesis processes, and as a solvent in teaching, research and analytical laboratories.

Uses

Di-n-butyl ether is used as a solvent for Grignard, Witting and alkyl lithium reactions. It is also used as a solvent for oils and fats and some natural and synthetic resins. It is considered as a replacement for terathydofuran in organic synthesis due to its less water and peroxide and high boiling point. In the pharmaceutical industry, it is used in the manufacturing process of active pharmaceutical ingredient such as procarbazine and cefaclor. In addition to this, it is used as an important solvent for the application of the coating.

Uses

Solvent for hydrocarbons, fatty materials; extracting agent used especially for separating met- als, solvent purification, organic synthesis (reaction medium).

General Description

Di-n-butyl ether is a clear colorless liquid with an ethereal odor. Flash point below 141°F. Less dense than water and insoluble in water. Vapors heavier than air. Irritates the eyes, nose, throat, and respiratory tract.

Air & Water Reactions

Highly flammable. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979 p.151-154, 164]. A mixture of liquid air and diethyl ether exploded spontaneously [MCA Case History 616 1960]. Insoluble in water.

Reactivity Profile

Ethers, such as BUTYL ETHER can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.

Hazard

Toxic on prolonged inhalation. Flammable, moderate fire risk. May form explosive peroxides, especially in anhydrous form.

Health Hazard

Inhalation causes irritation of nose and throat. Liquid irritates eyes and may irritate skin on prolonged contact. Ingestion causes irritation of mouth and stomach.

Fire Hazard

Behavior in Fire: Vapor is heavier than air and may travel a considerable distance to a source of ignition and flash back.

Chemical Reactivity

Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Industrial uses

n-Butyl ether is used in synthesis reactions that require an anhydrous, inert solvent. This ether is a valuable extraction solvent for aqueous solutions because of its low water solubility. n-Butyl ether when mixed with ethanol or butanol is an excellent solvent for ethyl cellulose.

Safety Profile

Mildly toxic by inhalation, ingestion, and skin contact. Human systemic effects by inhalation: conjunctiva irritation and unspecified nasal effects. An experimental skin and human eye irritant. See also ETHERS. Dangerous fire hazard when exposed to heat, flame, oroxidizers. Incompatible with NCL and oxidizing materials. To fight fire, use alcohol foam, dry chemical. When heated to decomposition it emits acrid smoke and fumes.

Potential Exposure

Di-n-butyl ether is used as a solvent for hydrocarbons, fatty materials; extracting agent in used metals separation; solvent purification, making other chemicals. Incompatibilities: May form explosive mixture with air. May accumulate static electrical charges, and may cause ignition of its vapors. Incompatible with strong acids; oxidizers. Contact with air or light may form unstable and explosive peroxides, especially anhydrous form.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin,remove contaminated clothing and wash immediately withsoap and water. Seek medical attention immediately. If thischemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, includingresuscitation mask) if breathing has stopped and CPR if heartaction has stopped. Transfer promptly to a medical facility.When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Donot make an unconscious person vomit.

Environmental Fate

Butyl ether has the ability to dissolve lipids. As a result, it causes irritation and pain on contact with the eyes and nasal mucosa. It also causes dermal irritation and dermatitis on contact with the skin. Damage caused by butyl ether appears to be scattered loss of epithelial cells due to solution of phospholipid cell membranes. At the central nervous system (CNS) level, butyl ether, like other volatile organic solvents, depresses the CNS by dissolving in the lipid membrane of the cells and disrupting the lipid matrix. These effects are known as membrane fluidization. At the molecular level, membrane fluidization disrupts solute gradient homeostasis, which is essential for cell function.

storage

Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with butyl ether you should be trained onits proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Butylether must be stored in a cool, dark place, separated fromoxidizers (such as perchlorates, peroxides, permanganates,chlorates, and nitrates), since violent reactions occur. Storein tightly closed containers in a cool, well-ventilated area.Protect storage containers from physical damage. Sourcesof ignition, such as smoking and open flames, are prohibited where Butyl ether is handled, used, or stored. Metalcontainers involving the transfer of 5 gallons or more ofbutyl ether should be grounded and bonded. Drums must beequipped with self-closing valves, pressure vacuum bungs,and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers ofButyl ether.

Shipping

UN1149 Butyl ethers & Dibutyl ethers, Hazard Class: 3; Labels: 3—Flammable liquid

Purification Methods

Peroxides (detected by the liberation of iodine from weakly acid HCl solutions of 2% KI) can be removed by shaking 1L of ether with 5-10mL of a solution comprising of 6.0g of ferrous sulfate and 6mL conc H2SO4 and 110mL of water, with aqueous Na2SO3, or with acidified NaI, water, then aqueous Na2S2O3. After washing with dilute NaOH, KOH, or Na2CO3, then water, the ether is dried with CaCl2 and distilled. It can be further dried by distillation from CaH2 or Na (after drying with P2O5), and stored in the dark with Na or NaH. The ether can also be purified by treating with CS2 and NaOH, expelling the excess sulfide by heating. The ether is then washed with water, dried with NaOH and distilled [Kusama & Koike J Chem Soc Jpn, Pure Chem Sect 72 229 1951]. Other purification procedures include passage through an activated alumina column to remove peroxides, or through a column of silica gel, and distillation after adding about 3% (v/v) of a 1M solution of MeMgI in n-butyl ether. [Beilstein 1 IV 1520.]

Toxicity evaluation

Production of butyl ether and its use as an extracting agent and a solvent may result in its release to the environment through various waste streams. If released to air, a vapor pressure of 6.0 mmHg at 25°C indicates that butyl ether will exist solely as a vapor in the ambient atmosphere. Vaporphase butyl ether reacts in the atmosphere with hydroxyl radicals; the half-life for this reaction in air has been estimated to be 13 h. Direct photolysis is not expected to be an important removal process since aliphatic ethers do not absorb light in the environmental spectrum. If released to soil, butyl ether is expected to have high mobility based on its estimated adsorption coefficient (Koc) of 51. Volatilization from moist soil surfaces may be an important fate process based on its reported Henry’s law constant of 6.0×10^-3 atm m³ mol^-1. Butyl ether is expected to volatilize from dry soil surfaces based on its reported vapor pressure. If released into water, butyl ether is not expected to adsorb to suspended solids and sediment in water based on its Koc. Aqueous screening studies indicate biodegradation may be an important fate process in both soil and water; for example, butyl ether reached 3–4% of its theoretical biological oxygen demand (BOD) over 4 weeks using an activated sludge seed. Volatilization from water surfaces is expected to occur based on this compound’s estimated Henry’s law constant. Estimated volatilization half-lives for a model river and model lake have been reported to be 3.5 h and 4.6 days, respectively. Bioconcentration factors (BCFs) ranging from 30 to 114 in carp suggest that bioconcentration in aquatic organisms is moderate to high. Butyl ether is not expected to undergo hydrolysis in the environment due to the lack of hydrolyzable functional groups.

Incompatibilities

Forms explosive mixture with air. Mayaccumulate static electrical charges, and may cause ignitionof its vapors. Incompatible with strong acids and oxidizers.Contact with air or light may form unstable and explosiveperoxides, especially anhydrous form.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.