Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Property

Melting point:

>300 °C

Density 

1.011 g/cm³ (dried coatings)

Flash point:

100 °C

storage temp. 

20-25°C

solubility 

1.3-1.7% Solidssoluble

CAS DataBase Reference

155090-83-8(CAS DataBase Reference)

EPA Substance Registry System

Benzenesulfonic acid, ethenyl-, homopolymer, compd. with 2,3-dihydrothieno[3,4-b]-1,4-dioxin homopolymer (155090-83-8)

Safety

Hazard Codes 

Xi,T,C,Xn

Risk Statements 

36/38-41-61-35-36-22-10-5

Safety Statements 

26-36/37/39-36-45-53

WGK Germany 

1

HS Code 

39039000

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P310Immediately call a POISON CENTER or doctor/physician.

P321Specific treatment (see … on this label).

P363Wash contaminated clothing before reuse.

P405Store locked up.

P501Dispose of contents/container to..…

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Chemical Properties,Usage,Production

Applications

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), also named PEDOT: PSS, belongs to organic/polymer TE materials and has the advantages of water-processable, thermally stable, and can be highly conductive[1]. The charge storage of PEDOT:PSS in supercapacitors is due to redox reactions[2]. It is commonly included as an electroactive conductor in various organic devices（supercapacitors, displays, transistors, and energy‐converters). For example, spin-coating of the PEDOT:PSS water dispersion on n-type silicon wafer[3].

Application

PEDOT:PSS is the subject of a considerable amount of research, and is used for a range of applications within thin-film electronic fabrication. This include perovskite photovoltaics, organic photovoltaics, organic light emitting diodes, transparent conductors, organic electrochemical transistors, flexible electronics, thermoelectric generators, supercapitors, and energy storage

Description

AI 4083, PH 1000, HTL Solar and HTL Solar 3 for thin-film electronic fabrication

Chemical Properties

Dark blue liquid

Uses

PEDOT:PSS can be used as an electrode material that forms a layered structure with a high mobility for charge carriers. It can be used for a wide range of energy based applications, such as organic photovoltaics (OPVs), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs) and supercapacitors.

Uses

Screen Printing results on Autotype Autosta CT7 P77/55 screen with 300 mm/s
Curing temp. 130°C during 3 min

Uses

Conductive ink based on the high conductivity grade PEDOT:PSS polymer dispersion. Suitable for deposition and patterning of transparent conductive films using slot die coating and spin coating in OPV application.

General Description

A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.

References

[1] Kurushima Y, et al. Effect of PEDOT:PSS composition on photovoltaic performance of PEDOT:PSS/n-Si hybrid solar cells. Japanese Journal of Applied Physics, 2021; 60: 091001.
[2] Fan Z, et al. Thermoelectric Properties of PEDOT:PSS. Advanced Electronic Materials, 2019; 5: 1800769.
[3] Volkov A, et al. Understanding the Capacitance of PEDOT:PSS. Advanced Functional Materials, 2017; 27: 1700329.