PETROLEUM ETHER Property

Boiling point:

90-100 °C

Density 

0.77 g/mL at 20 °C

vapor density 

2.5 (vs air)

vapor pressure 

25.8 psi ( 55 °C)

refractive index 

n20/D 1.428

Flash point:

−57 °F

form 

Clear colorless to yellow liquid; petroleum distillate containing C5 to C11 hydrocarbons; a typical composition is paraffins 55.4%, naphthenes 30.3%, alkyl benzene 11.7%, dichloroparaffins 2.4%, and benzene less than 0.1%.

Specific Gravity

0.671 (20/4℃)

Stability:

Stable. Highly flammable. Incompatible with strong oxidizing agents.

EPA Substance Registry System

Naphtha (8030-30-6)

Safety

Hazard Codes 

Xn,T,N

Risk Statements 

12-65-45-67-66-51/53-10

Safety Statements 

62-45-53-61

OEB

A

OEL

TWA: 100 ppm (400 mg/m3)

RIDADR 

UN 3295 3/PG 2

WGK Germany 

3

RTECS 

OI6180000

HazardClass 

3.1

PackingGroup 

II

Hazardous Substances Data

8030-30-6(Hazardous Substances Data)

Toxicity

LD50 oral in rat: > 5gm/kg

IDLA

1,000 ppm [10% LEL]

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H304May be fatal if swallowed and enters airways

H340May cause genetic defects

H350May cause cancer

PETROLEUM ETHER Chemical Properties,Usage,Production

Chemical Properties

reddish-brown mobile liquid with aromatic odour

Chemical Properties

Naphthas derived from both petroleum and coal tar are included in this group. Petroleum naphthas are colorless liquids. Gasoline or kerosene-like odor. A mixture of paraffins (C5-C13) that may contain a small amount of aromatic hydrocarbons, and are termed “close-cut” fractions. “Medium-range” and “wide-range” fractions are made up of 40-80% aliphatic hydrocarbons; 25-50% naphthenic hydrocarbons; 0-10% benzene, and 0-20% other aromatic hydrocarbons.

Uses

Pharmaceutic aid (solvent).

Uses

Diluent for paints, coatings, resins, printing inks, rubbers, and cements; solvent.

Production Methods

High flash naphtha C19 aromatic hydrocarbon components are obtained by dehydrogenating naphthenes and are primarily ethyltoluene and trimethylbenzene.

Definition

A general term applied to refined, partly refined, or unrefined petroleum products and liquid products of natural gas, not less than 10% of which distill below 347F (175C) and not less than 95% of which distill below 464F (240C) when subjected to distillation in accordance with the Standard Method of Test for Distillation of Gasoline, Naphtha, Kerosene, and Similar Petroleum Products

General Description

A clear colorless to dark brownish colored liquid with an aromatic odor. Less volatile fraction separated from coal tar by distillation. Contains naphthalene, acenaphthene, methylnaphthalenes, fluorene, phenol, cresols, pyridine, picolines, among other substances. Flash point greater than 100 °F. Toxic by inhalation and skin absorption. Less dense than water and insoluble in water. Vapors heavier than air.

Air & Water Reactions

Highly flammable. Insoluble in water.

Reactivity Profile

Saturated aliphatic hydrocarbons, which are contained in NAPHTHA, may be incompatible with strong oxidizing agents like nitric acid. Charring of the hydrocarbon may occur followed by ignition of unreacted hydrocarbon and other nearby combustibles. In other settings, aliphatic saturated hydrocarbons are mostly unreactive. They are not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents. When heated sufficiently or when ignited in the presence of air, oxygen or strong oxidizing agents, they burn exothermically to produce carbon dioxide and water. May be ignited by strong oxidizers. Incompatible with strong oxidizers .

Hazard

Flammable, dangerous fire risk, explosive limits in air 1–6%.

Health Hazard

Primarily a narcotic, causing unconsciousness in high concentrations. The symptoms of acute benzene poisoning are not likely, since the compound has components other than benzene.

Flammability and Explosibility

Extremely flammable

Safety Profile

A human poison via intravenous route. Experimental carcinogenic effects reported by skin contact. Human systemic effects by intravenous route: dyspnea, respiratory stimulation, and other unspecified respiratory effects. Mildly toxic by inhalation. Can cause unconsciousness, which may be followed by coma, stentorious breathing, and bluish tint to the skin. Recovery follows removal from exposure. In mild form, intoxication resembles drunkenness. On a chronic basis, no true poisoning; sometimes headache, lack of appetite, dizziness, sleeplessness, indigestion, and nausea. A common air contaminant. Flammable liquid when exposed to heat or flame; can react with oxidzing materials. Keep containers tightly closed. Slight explosion hazard. To fight fire, use foam, CO2, dry chemical.

Potential Exposure

Naphthas are used as organic solvents for dissolving or softening rubber, oils, greases, bituminous paints, varnishes, and plastics. The less flammable fractions are used in dry cleaning. The heavy naphthas are used as a vehicle for various pesticides. Coal tar naphthas are used as quick-drying paint solvent; in the manufacture of floor coverings; resin solution; varnish; VM&P naphtha is used as a solvent for lacquers and varnishes and as a rapid-dry paint thinner.

Shipping

UN1136 Coal tar distillates, flammable, Hazard Class: 3; Labels: 3-Flammable liquid.

Incompatibilities

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.