DIMETHYL N,N-DIISOPROPYLPHOSPHORAMIDITE

DIMETHYL N,N-DIISOPROPYLPHOSPHORAMIDITE Property

Boiling point:

54 °C10 mm Hg(lit.)

Density 

0.840 g/mL at 20 °C(lit.)

refractive index 

n20/D 1.420(lit.)

Flash point:

100 °C

storage temp. 

Inert atmosphere,Store in freezer, under -20°C

solubility 

Chloroform (Sparingly), Ethyl Acetate (Sparingly)

form 

Oil

color 

Clear Colourless

Stability:

Moisture Sensitive

Safety

Hazard Codes 

Xi

Risk Statements 

36/37/38

Safety Statements 

26-36

WGK Germany 

3

F 

10-21

HS Code 

2929 90 00

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

DIMETHYL N,N-DIISOPROPYLPHOSPHORAMIDITE Chemical Properties,Usage,Production

Uses

A useful reagent for the efficient phosphorylation of alcohols.

reaction suitability

reaction type: Phosphorylations

Synthesis

General procedure for the synthesis of dimethyl N,N-diisopropylphosphoramidite amide from methanol and dichloro-N,N-diisopropylphosphoramidite: firstly, the yellow solution obtained from the reaction was subjected to rotary evaporation, followed by the direct addition of 47 mL (325 mmol, 32.9 g) of triethylamine and 250 mL of tetrahydrofuran, and stirring of the mixture to obtain a yellow suspension. Anhydrous methanol 13 mL (322 mmol, 10.3 g) was prepared in a dropping funnel, and methanol was slowly added dropwise to the reaction system over a period of 20 min under nitrogen protection and an ice-salt bath, and the dropping funnel was washed with 150 mL of tetrahydrofuran. Upon completion of the dropwise addition, the reaction mixture was transformed into a white suspension. The ice bath was removed and stirring was continued for 2 h. The reaction was then allowed to stand for a few minutes and diafiltration was performed to obtain a yellow liquid containing a light pink solid. The solid was washed with a small amount of tetrahydrofuran. The tetrahydrofuran was removed by rotary evaporation. The product was dissolved in 10 mL of 5% sodium bicarbonate solution and extracted three times with 20 mL of dichloromethane, the organic phases were combined, the dichloromethane was removed by rotary evaporation, and finally a reduced pressure distillation was performed to collect 78 stable fractions. A colorless liquid and a white solid were observed in the condenser tube, which were identified as the same substance, and the collections could be combined to give a final yield of 16.68 g with 42% yield.

References

[1] Journal of the Chemical Society. Perkin Transactions 2, 1998, # 7, p. 1621 - 1628
[2] Patent: CN102977145, 2017, B. Location in patent: Paragraph 0184; 0185