4-Methoxybenzoyl chloride Property

Melting point:

22 °C(lit.)

Boiling point:

262-263 °C(lit.)

Density 

1.260 g/mL at 20 °C(lit.)

vapor pressure 

1.853Pa at 25℃

refractive index 

n20/D 1.581(lit.)

Flash point:

190 °F

storage temp. 

2-8°C

form 

Liquid After Melting

color 

Clear colorless to brown

Odor

Sharp, penetrating.

Water Solubility 

It reacts in water.

Sensitive 

Moisture Sensitive

Merck 

14,673

BRN 

471918

Stability:

Stable, but reacts violently with water. Ensure no moisture enters the container in which this material is stored, to prevent pressure build-up. Incompatible with water, moisture, strong bases, strong oxidizing agents.

InChIKey

MXMOTZIXVICDSD-UHFFFAOYSA-N

LogP

1.52

CAS DataBase Reference

100-07-2(CAS DataBase Reference)

NIST Chemistry Reference

4-Methoxybenzoic acid chloride(100-07-2)

EPA Substance Registry System

Benzoyl chloride, 4-methoxy- (100-07-2)

Safety

Hazard Codes 

C,F

Risk Statements 

14-34-67-65-63-48/20-11

Safety Statements 

26-36/37/39-45-62-16

RIDADR 

UN 1729 8/PG 2

WGK Germany 

1

RTECS 

CA0270000

F 

10-21

TSCA 

Yes

HazardClass 

8

PackingGroup 

II

HS Code 

29163990

Hazardous Substances Data

100-07-2(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

4-Methoxybenzoyl chloride Chemical Properties,Usage,Production

Chemical Properties

4-methoxybenzoyl chloride appears as an amber-colored crystalline solid. Melting point 72 °F. Corrosive to metals and skin. Vapors may cause serious burns to the eyes. Decompose with water or alcohol, soluble in acetone and benzene.

Definition

The hydrolysis of 4-Methoxybenzoyl chloride (OMe) generally occurs through a  dissociative mechanism (SN1). The reaction  rate is strongly affected by the polarity of the medium and the  ability to stabilize the leaving group. Water encapsulated within a reverse micellar system is less polar and less available compared to a continuous aqueous phase; Consequently, the hydrolysis of OMe in the micellar medium is slower than in pure water.

Uses

4-Methoxybenzoyl chloride is used in the synthesis of stilbene and dihydrostilbene derivatives as potential anti-cancer agents. It is also used in the synthesis of coumarin dimers with potential HIV-1 activity.

Application

4-Methoxybenzoyl chloride is one of the reactive acylating agents that can react with carboxylic acids, alcohols and amines to yield respective carboxylic anhydrides, esters and amides.
4-Methoxybenzoyl chloride can be used as radical precursor in visible-light photocatalysis to synthesize various heterocyclic compounds.
It can be used to synthesize acylphosphine ligands for the rhodium-catalyzed hydrosilylation of alkenes.
Incorporation of 4-methoxybenzoyl chloride modified indium tin oxide (ITO) as cathode for the fabrication of organic light-emitting diodes (OLEDs) has been reported.
1,3 diketones synthesized from 4-methoxybenzoyl chloride can be used in one pot synthesis of various pyrazole derivatives.
It can also be used in the total synthesis of bioactive compounds like echinoside A and salinosporamide A.

Synthesis

4-Methoxybenzoyl chloride is synthesized from the direct chlorination of 4-methoxybenzoic acid by thionyl chloride.

General Description

4-methoxybenzoyl chloride appears as an amber-colored crystalline solid. Melting point 72°F. Corrosive to metals and skin. Vapors may cause serious burns to the eyes.

Air & Water Reactions

Fumes in air. Reacts exothermically with water (including moisture in air or soil) to form hydrochloric acid and insoluble anisic acid [Merck 11th ed. 1989].

Reactivity Profile

ANISOYL CHLORIDE reacts exothermically with bases, including amines. Incompatible with water, strong oxidizing agents, alcohols. Sealed containers held at room temperature may explode, due to slow decomposition that builds up pressure. This situation is more dangerous with heat. May react vigorously or explosively with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291].

Hazard

Solutions corrosive to tissue. Explosion risk when in closed containers due to pressure caused by decomposition at room temperature.

Health Hazard

Vapor irritates mucous membranes. Contact of liquid with eyes or skin causes severe irritation. Ingestion causes severe irritation of mouth and stomach.

Fire Hazard

Special Hazards of Combustion Products: Irritating hydrogen chloride fumes may be formed.

Flammability and Explosibility

Not classified

Chemical Reactivity

Reactivity with Water Reacts slowly to generate hydrogen chloride (hydrochloric acid). The reaction is not hazardous; Reactivity with Common Materials: Corrodes metal slowly; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Flush with water, rinse with sodium bicarbonate or lime solution; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Safety Profile

Corrosive to skin, eyes, mucous membranes, and other tissue.Evolves HCl by hydrolysis. A storage hazard; can explode spontaneously at room temperature. When heated to decomposition it emits toxic fumes of Cland may explode.

storage

Stored in a closed container can cause an explosion due to the pressure caused by decomposition, should be stored at low temperature (5°C).

Structure and conformation

Anisoyl chloride, also known as methoxybenzoyl chloride), is an acyl halide, specifically an aromatic acyl chloride, and may be formed from anisic acid by replacing a hydroxyl group of the carboxylic acid with a chloride group. There are three isomers: the ortho-, meta-, and para- forms. 4-Methoxybenzoyl chloride is para- forms. Their structures differ in the arene substitution pattern—the location of the methoxy group on the ring as compared to the acyl halide.