METSULFURON METHYL Property

Melting point:

158°C

Boiling point:

181°C (rough estimate)

Density 

1.4561 (rough estimate)

refractive index 

1.6460 (estimate)

storage temp. 

0-6°C

solubility 

DMSO (Slightly), Methanol (Slightly, Heated)

form 

Solid

pka

2.55±0.10(Predicted)

color 

White to Off-White

Water Solubility 

27mg/L(temperature not stated)

BRN 

587472

LogP

2.200

CAS DataBase Reference

74223-64-6(CAS DataBase Reference)

EPA Substance Registry System

Metsulfuron-methyl (74223-64-6)

Safety

Hazard Codes 

N

Risk Statements 

50/53

Safety Statements 

60-61

RIDADR 

UN3077 9/PG 3

WGK Germany 

2

RTECS 

DH3563000

HS Code 

29339900

Hazardous Substances Data

74223-64-6(Hazardous Substances Data)

Toxicity

LD50 in male and female rats, in male and female rabbits (mg/kg): >5000, >2000 orally; LC50 (96 hour) in American perch, rainbow trout: 150 ppm; LD50 in wild ducks: 2510 mg/kg (Lefebvre)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P273Avoid release to the environment.

P391Collect spillage. Hazardous to the aquatic environment

P501Dispose of contents/container to..…

METSULFURON METHYL Chemical Properties,Usage,Production

Chemical Properties

Light yellow solid

Chemical Properties

White, off-white or pale yellow crystalline solid. Slight, sweet odor; ester-like.

Uses

Metsulfuron-methyl is a triazine urea herbicide used to control broad-leaved weeds in barley and wheat.

Uses

Metsulfuron-methyl is an organic micro-pollutant.

Uses

Herbicide.

Definition

ChEBI: A N-sulfonylurea in which the sulfonyl group is attached to a 2-(methoxycarbonyl)phenyl group while a (4-methoxy-6-methyl-1,3,5-triazin-2-yl group replaces one of the amino hydrogens of the remaining urea group.

Agricultural Uses

Herbicide: Metsulfuron-methyl is a pre-emergence and post-emergence herbicide used to control annual grasses, brush, woody plants and broadleaf weeds. It can be applied to cereals including barley, rye and wheat and to pastures. It is primarily used to control brush, woody plants and broadleaf weeds on rights-of-way, fence rows, storage areas, highways and other non-crop areas.

Trade name

ALLIE®; ALLY®; ALLY-20DF®; ANSWER®; BRUSH-OFF®; CANVAS®; CIMARRON®; DMC® WEED CONTROL; DPD 63760H®; DPX 6376®; DPX-T 6376®; ESCORT®; FINESSE®; GROPPER®; NUP®; PARTISAN ®; PASTURE® MD; RIVERDALE®; ROSULFURON®

Potential Exposure

Metsulfuron-methyl is a preemergence and postemergence sulfonylurea herbicide used to control annual grasses, brush, woody plants and broadleaf weeds. It can be applied to cereals including barley, rye and wheat and to pastures. It is primarily used to control brush, woody plants and broadleaf weeds on rights-of-way, fence rows, storage areas, highways and other noncrop areas.

Environmental Fate

Soil/Plant. Hydrolyzes in soil and plants to nontoxic products (Hartley and Kidd, 1987). The half-life in soil varies from 7 days to 1 month (Hartley and Kidd, 1987).
Ismail and Lee (1995) studied the persistence of metsulfuron-methyl in a sandy loam (pH 5.1) and clay soil (3.1) under laboratory conditions. Degradation was more rapid in non-sterilized than in sterilized soil. In non-sterilized soil, the rate of degradation increased with increasing soil moisture content. When the moisture level in the sandy loam and clay soil was increased from 20 to 80% of field capacity at 35°C, the half-lives were reduced from 9.0 to 5.7 and 11.2 to 4.6, days, respectively. The investigators concluded that the disappearance of metsulfuron-methyl in soil resulted from microbial degradation and chemical hydrolysis.

Metabolic pathway

In soils, under aerobic conditions, metsulfuron methyl is degraded by the cleavage of the sulfonylurea linkage, resulting in the formation of methyl 2- (aminosulfonyl)benzoate, 4-methoxy-6-methyl-2-amino- 1,3,5-triazine, and saccharin as major products. Under anaerobic conditons, free acid of metsulfuron methyl and the resulting O-demethylation product are identified. The formation of two ring-opening products at the triazine moiety is observed. Under acidic conditions, hydrolytic degradation products identified are involved in the soil degradation products. In plants, the specific metabolites are identified as the hydroxylation product of the phenyl ring of metsulfuron methyl and 4-methoxy-6-hydroxymethyl-2-amino-1,3,5- triazine. Mammalian metabolites are also included in the soil metabolites.

Shipping

UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.

Incompatibilities

Strong oxidizers. Stable in air to about 140 C. It is hydrolyzed in acid solutions.

Waste Disposal

It is the responsibility of chemical waste generators to determine the toxicity and physical properties and of a discarded chemical and to properly identify its classification and certification as a hazardous waste and to determine the disposal method. United States Environmental Protection Agency guidelines for the classification determination are listed in 40 CFR Parts 261.3. In addition, waste generators must consult and follow all regional, national, state and local hazardous waste laws to ensure complete and accurate classification and disposal methods. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Offer surplus and nonrecyclable solutions to a licensed disposal company. Dissolve or mix the pesticide with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.