Trichloroacetic acid Property

Melting point:

54-58 °C (lit.)

Boiling point:

196 °C (lit.)

Density 

1.62 g/mL at 25 °C (lit.)

vapor density 

<1 (vs air)

vapor pressure 

1 mm Hg ( 51 °C)

refractive index 

n20/D 1.62(lit.)

Flash point:

196°C

storage temp. 

Store at +15°C to +25°C.

solubility 

H₂O: 0.5 M at 20 °C, clear, colorless

pka

0.7(at 25℃)

form 

Solid

color 

White

Odor

sharp, pungent odor

PH

<1.0 (25℃, 0.5M in H2O)

Water Solubility 

120 g/100 mL (20 ºC)

Sensitive 

Hygroscopic

λmax

210nm(EtOH)(lit.)

Merck 

14,9627

BRN 

970119

Exposure limits

ACGIH: TWA 0.5 ppm
NIOSH: TWA 1 ppm(7 mg/m3)

Dielectric constant

4.9（20℃）

Stability:

Stable, but moisture sensitive. Incompatible with water, strong bases. Note that the Merck Index states that this material is hydrolytically unstable in aqueous solution below 30% by weight. Decomposition products include carbon monoxide and carbon dioxide. The generation of these gases in a sealed container may lead to a pressure rise sufficien

LogP

1.330

CAS DataBase Reference

76-03-9(CAS DataBase Reference)

NIST Chemistry Reference

Acetic acid, trichloro-(76-03-9)

IARC

2B (Vol. 63, 84, 106) 2014

EPA Substance Registry System

Trichloroacetic acid (76-03-9)

Safety

Hazard Codes 

Xn,N,C,F,Xi

Risk Statements 

36/37/38-40-51/53-50/53-35-38-11-34-67-52/53

Safety Statements 

26-36/37-61-60-45-36/37/39-24/25-16

RIDADR 

UN 1839 8/PG 2

WGK Germany 

2

RTECS 

AJ7875000

F 

10-21

Autoignition Temperature

711 °C

Hazard Note 

Corrosive/Hygroscopic

TSCA 

Yes

HazardClass 

8

PackingGroup 

II

HS Code 

29154000

Hazardous Substances Data

76-03-9(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 5000 mg/kg (Bailey, White)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

H335May cause respiratory irritation

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P271Use only outdoors or in a well-ventilated area.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Trichloroacetic acid Chemical Properties,Usage,Production

Description

Trichloroacetic acid, also known as TCA or 76-03-9, is a colorless or white orthorhombic crystal with strong deliquescence and a slight, special irritant smell. It is highly corrosive. TCA's aqueous solution is strongly acidic, with a pH of 1.2 for a 0.1 mol solution. Concentrations of TCA at or below 30% cannot be stored for long periods due to decomposition into chloroform, hydrogen chloride, carbon dioxide, and carbon monoxide. Dilute alkali leads to hydrolysis into chloroform and carbon dioxide. Concentrated alkali results in the formation of formic acid. TCA is a highly toxic substance with an oral LD50 of 3320mg/kg.

Chemical Properties

Trichloroacetic acid, a colorless crystalline solid, is commonly utilized in liquid solutions. It has the ability to absorb moisture from the surrounding air and become syrupy. When dissolved in water, the process releases heat. However, this potent acid is corrosive to both metals and tissue.

Uses

Traditionally used to precipitate protein. Has been used to determine protein concentration by quantitative precipitation. Used as decalcifier and fixative, as a laboratory reagent, a herbicide, in medicine, and in microscopy.

Uses

As a reagent for albumin detection; in making herbicides. It is found as a by-product after chlorination of water containing humic materials.

Uses

Protein precipitation reagentTrichloroacetic acid is used as a precipitating agent in biochemistry for precipitation of proteins, DNA and RNA. It is an active ingredient used in cosmetic treatments like chemical peels, tattoo removal and the treatment of warts including genital warts. It is also used to determine protein concentration and as a decalcifier and fixative in microscopy.

Uses

Trichloroacetate (TCA) is used primarily for the selective control of annual and perennial grass weeds in cropland and noncropland. TCA is acidic in nature and are not strongly sorbed by soils. It is reported to be rapidly degraded in both soil and water by microbial processes. However, the breakdown of TCA occurs very slowly when incubated at 14–15 °C in acidic soils. iming not only accelerates this degradation but also increases the numbers of TCA-degrading bacteria.

Definition

ChEBI: Trichloroacetic acid is a monocarboxylic acid that is acetic acid in which all three methyl hydrogens are substituted by chlorine. It has a role as a metabolite, a carcinogenic agent and a mouse metabolite. It is a monocarboxylic acid and an organochlorine compound. It is functionally related to an acetic acid. It is a conjugate acid of a trichloroacetate.

Preparation

Trichloroacetic acid is produced on an industrial scale by chlorination of acetic acid or chloroacetic acid mother-liquors at 140 - 160 °C. If necessary, calcium hypochlorite is added as a chlorination accelerator. There are conflicting views concerning adding heavy metal salts as chlorination catalysts. Examples of catalysts that have been used are iron and copper compounds, which are precipitated with sulfuric acid or phosphoric acid if decomposition of the reaction mixture occurs; 2% phosphoric acid; and catalysts and UV light. Trichloroacetic acid has also been produced without catalysts. The crude product, containing about 95% trichloroacetic acid, is best isolated by crystallizing the melt, removing the mother-liquor with most of its impurities, and increasing the purity by centrifugation or recrystallization.

Application

Trichloroacetic acid(76-03-9) can be used as pharmaceutical raw materials, herbicides (potassium trichloroacetate and sodium trichloroacetate, etc.), textile dyeing auxiliaries, metal surface treatment agent and acid chloride, anhydride, amide, polyester, organometallic salt, water salicylaldehyde, chlorocarboxylic acid and the raw materials of other organic synthesis.
In addition, in medicine, it can also be used as etherifying agents and keratolytics, bile pigment reagents and protein precipitation reagents. In the field of biochemistry, it can be used for separation analysis of biological phosphate compounds and reagents for determination of fluoride and lipid as well as microscopic fixative, decalcification, chromatography reagents.
The product is warts agent and astringent in pharmaceutical field, mainly used as biochemical drug extractant for the extraction of many highly efficient drugs such as adenosine triphosphate, cytochrome C and placental polysaccharides.
In addition, trichloroacetic acid, together with alkaline phenol, can be used for salicylaldehyde compound synthesis by ReimerTiemann reaction. It can also react with monoolefine compounds for synthesizing chlorocarboxylic acid [CCl3 (CH2CH2) nCOOH].

Reactions

Trichloroacetic acid is a strong organic acid with a dissociation constant K = 3 &times; 10-2. It has lively chemical properties. Its sodium salt is easily subject to decarboxylation into chloroform. It will be reduced to alcohol upon coming across LiAlH4. It can have halogen replacement reaction with KBr:

General Description

Trichloroacetic acid (TCA) is derived from Trichloroethylene (TCE) metabolism. It is used as an acid decalcifying agent. TCA is used as a fixative for nuclear staining and protein precipitation.

Reactivity Profile

Trichloroacetic acid is a strong acid; when heated, in the presence of water, decomposes forming phosgene and HCl. [Handling Chemicals Safely 1980 p. 915]. The acid was added to copper wool and rinsed down with dimethyl sulfoxide. This caused what was thought to be an extremely exothermic dehydrohalogenation reaction that melted the neck of the flask, [Chem. Eng. News, 1981, 59(28), 4].

Health Hazard

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.

Biochem/physiol Actions

TCA might act as a carcinogen, targeting liver. It might be used as an acid decalcifying agent. TCA helps in nuclear staining.

Safety Profile

Poison by ingestion and subcutaneous routes. Moderately toxic by intraperitoneal route. Questionable carcinogen with experimental carcinogenic data. Experimental reproductive effects. Mutation data reported. A corrosive irritant to skin, eyes, and mucous membranes. When heated to decomposition it emits toxic fumes of Cland Na2O. Used as an herbicide.

Potential Exposure

This haloacetic acid can be a byproduct of drinking water disinfection and may increase the risk of cancer. Trichloroacetic acid is used as medication; in organic syntheses; as a reagent for albumin detection; as an intermediate in pesticide manufacture and in the production of sodium trichloroacetate which is itself a herbicide.

Carcinogenicity

TCA was not mutagenic in bacterial assays.The IARC has determined that there is limited evidence for the carcinogenicity of TCA in experimental animals and that it is not classifiable as to its carcinogenicity to humans. Neutralized TCA was not clastogenic in human lymphocytes in vitro or in the mouse bone marrow micronucleus test.

Shipping

UN1839 (solid) & UN2564 (solution) Trichloroacetic acid, solid and Trichloroacetic acid, solution, Hazard class: 8; Labels: 8-Corrosive material.

Purification Methods

Purify the acid by fractional crystallisation from its melt, then crystallise it repeatedly from dry *benzene and store it over conc H2SO4 in a vacuum desiccator. It can also be crystallised from CHCl3 or cyclohexane, and dried over P2O5 or Mg(ClO4)2 in a vacuum desiccator. Trichloroacetic acid can be fractionally distilled under reduced pressure from MgSO4. Layne, Jaffé and Zimmer [J Am Chem Soc 85 435 1963] dried trichloroacetic acid in *benzene by distilling off the *benzene-water azeotrope, then crystallised the acid from the remaining *benzene solution. Manipulations should be carried out under N2. [Toxic vapours, use a well ventilated fume cupboard.] [Beilstein 2 IV 508.]

Incompatibilities

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, silver salts, strong acids, strong bases, moisture, iron, zinc, aluminum. Corrosive to iron, steel and other metals.

References

https://pubchem.ncbi.nlm.nih.gov/compound/trichloroacetic_acid#section=Top
https://en.wikipedia.org/wiki/Trichloroacetic_acid