Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Chemical Reagents >  Organic reagents >  Acyl halide >  2,4'-Dichloroacetophenone

2,4'-Dichloroacetophenone

Basic information Safety Supplier Related

2,4'-Dichloroacetophenone Basic information

Product Name:
2,4'-Dichloroacetophenone
Synonyms:
  • Ethanone,2-chloro-1-(4-chlorophenyl)-
  • 2,4'-Dichloroacetophenone 2-Chloro-1-(4-Chlorophenyl)ethanone
  • 2-Chloro-1-(4-chlorophenyl)-1-ethanone
  • alpha,4-Dichloroacetophenone,97%
  • à,4-dichloroacetophenone
  • 2,4DICHLOROACETOPHENONE(2,4'-DICHLOROISOMER)
  • 1-(4-Chlorophenyl)-2-chloroethanone
  • Chloromethyl 4-chlorophenyl ketone
CAS:
937-20-2
MF:
C8H6Cl2O
MW:
189.04
EINECS:
213-323-9
Product Categories:
  • C7 to C8
  • Carbonyl Compounds
  • Ketones
  • Benzene series
Mol File:
937-20-2.mol
More
Less

2,4'-Dichloroacetophenone Chemical Properties

Melting point:
100-102 °C(lit.)
Boiling point:
270 °C(lit.)
Density 
1.2979 (rough estimate)
refractive index 
1.5640 (estimate)
Flash point:
270°C
storage temp. 
Storage temp. 2-8°C
form 
powder to crystal
color 
White to Almost white
BRN 
637861
InChI
InChI=1S/C8H6Cl2O/c9-5-8(11)6-1-3-7(10)4-2-6/h1-4H,5H2
InChIKey
FWDFNLVLIXAOMX-UHFFFAOYSA-N
SMILES
C(=O)(C1=CC=C(Cl)C=C1)CCl
CAS DataBase Reference
937-20-2(CAS DataBase Reference)
More
Less

Safety Information

Hazard Codes 
Xi
Risk Statements 
36/37/38
Safety Statements 
26-36-37/39
RIDADR 
UN 3335
WGK Germany 
3
HS Code 
29147000
Storage Class
11 - Combustible Solids
Hazard Classifications
Aquatic Chronic 3
Eye Irrit. 2
Skin Irrit. 2
STOT SE 3

MSDS

More
Less

2,4'-Dichloroacetophenone Usage And Synthesis

Chemical Properties

white to off-white crystalline powder

Uses

2,4′-Dichloroacetophenone (4-chlorophenacyl chloride) may be used in the synthesis of chiral chlorohydrin by asymmetric reduction., It may be used as an alkylating agent in the Williamson reaction of 7-hydroxycoumarins to form substituted oxoethers.

General Description

2,4′-Dichloroacetophenone is a substituted α-chloro aromatic ketone.2 Its 35/37Cl WURST-QCPMG NMR spectra has been investigated.

Synthesis

Quickly weigh 10.2g of anhydrous AlCl3 (finely ground), added to a dry four-necked flask, and immediately add 114mL of m-dichlorobenzene (dried), the middle mouth mounted electric stirrer, the side of the mouth, respectively, thermometer, constant-pressure dropping funnel (containing a certain amount of purified acetic anhydride, the upper part of the spherical condenser tube is connected to a drying tube equipped with anhydrous CaCl2 and the absorption of toxic gases and the absorption device (absorbent solution for the), under uniform stirring, slowly dripping from the constant-pressure dropping funnel, adjust the drop acceleration, so that the reaction temperature is controlled below 60 ??, and adjust the drop acceleration, so that the reaction temperature is controlled below 60 ??. 5% NaOH solution), under uniform stirring, from the constant pressure dropping funnel slowly drop acetic anhydride, adjust the drop acceleration, so that the reaction temperature is controlled below 60 ??, the temperature rises in the drop process, a large number of white gases escaping, the solution color deepens, the drop is completed, the solution is a mauve viscous. Heating reflux reaction with an oil bath until no HCl gas escapes, the solution becomes light brown. Remove the gas absorption device, after cooling, the four-necked flask in a cold water bath, add a certain amount of ice-water mixture under stirring, the solids are all dissolved (if not dissolved, add a small amount of concentrated hydrochloric acid dropwise). The reactants were transferred to a partition funnel, the organic layer was separated, the aqueous layer was extracted with toluene in two stages, and finally the toluene layer was combined, the toluene layer was washed with 5% NaOH solution, distilled water, respectively, until the aqueous layer was pH=7.

Toluene as well as a small amount of water mixture was removed by rotary evaporation and recovered, and the residue was subjected to decompression distillation for collection of fractions at 125~126??C under 25 mm Hg (under atmospheric pressure, 2,4&# 39;-dichloroacetophenone has a boiling point of 245~247??C), which is a brown oily liquid. The product was placed in a refrigerator to cure the crystallization. In this experiment, ethanol was used as the solvent for recrystallization, and the product obtained from curing was recrystallized and dried to obtain the final product 2,4'-dichloroacetophenone.

2,4'-Dichloroacetophenone Supplier

Herd chemical Gold
Tel
18051217850
Email
jingwen.li@herdchem.com
J & K SCIENTIFIC LTD.
Tel
18210857532; 18210857532
Email
jkinfo@jkchemical.com
Alfa Aesar
Tel
400-6106006
Email
saleschina@alfa-asia.com
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Email
Sales-CN@TCIchemicals.com
Energy Chemical
Tel
021-021-58432009 400-005-6266
Email
sales8178@energy-chemical.com