Triisopropylsilyl acrylate
Triisopropylsilyl acrylate Basic information
- Product Name:
- Triisopropylsilyl acrylate
- Synonyms:
-
- Acrylic acid trisisopropylsilyl ester
- TIPX(Triisopropyl silyl acrylate)
- TIPSA
- TRIS(ISOPROPYL)SILYL ACRYLATE
- TRIISOPROPYLSILYL ACRYLATE
- ACRYLOXYTRIISOPROPYLSILANE
- 2-Propenoic acid,tris(1-methylethyl)silyl ester
- Co-Formula CFS-206
- CAS:
- 157859-20-6
- MF:
- C12H24O2Si
- MW:
- 228.4
- EINECS:
- 457-670-6
- Product Categories:
-
- PAINT AND COATING
- Mol File:
- 157859-20-6.mol
Triisopropylsilyl acrylate Chemical Properties
- Boiling point:
- 230.7±9.0 °C(Predicted)
- Density
- 0.91
- vapor pressure
- 4-380Pa at 20-25℃
- refractive index
- 1.4485
- Flash point:
- 78°
- storage temp.
- 2-8°C
- form
- clear liquid
- Specific Gravity
- 0.910
- color
- Colorless to Almost colorless
- Water Solubility
- 60-1000000mg/L at 20-25℃
- Hydrolytic Sensitivity
- 7: reacts slowly with moisture/water
- InChI
- InChI=1S/C12H24O2Si/c1-8-12(13)14-15(9(2)3,10(4)5)11(6)7/h8-11H,1H2,2-7H3
- InChIKey
- PQSIXYSSKXAOFE-UHFFFAOYSA-N
- SMILES
- C(O[Si](C(C)C)(C(C)C)C(C)C)(=O)C=C
- LogP
- -2.3-3.9 at 20-25℃
Triisopropylsilyl acrylate Usage And Synthesis
Chemical Properties
Colorless Transparent Liquid
Uses
Triisopropylsilyl acrylate is a resin monomer used to make new antifouling coatings for marine vessels. Ternary monomer reactivity ratios of triisopropylsilyl acrylate (SiA), methyl methacrylate (MMA), and n-butyl acrylate (BA), as common monomers in self-polishing coatings (SPCs) binders are obtained using experimental data collected from free radical bulk polymerization at 70 °C[1].
Preparation
Stir at the band of 1000ml, in the there-necked flask device of nitrogen mouth and drain, under nitrogen protection, choose triisopropyl silanol, toluene and triethylamine, proportionally 1mol: 400ml: 1.2mol mixes, heating under temperature 45 degree, reacts 3 hours; Add thiodiphenylamine, the quality of thiodiphenylamine is 0.03% of triisopropyl silanol quality; Add acrylate chloride, the ratio of acrylate chloride and triisopropyl silanol is 1mol: 1.2mol; React 2 as a child rectifying and draw Triisopropylsilyl acrylate, after measured, the rate of recovery of product is 97%, and purity is greater than 99.7%.
Flammability and Explosibility
Not classified
References
[1] Fereshteh K. Yousefi. “Terpolymerization of Triisopropylsilyl Acrylate, Methyl Methacrylate, and Butyl Acrylate: Reactivity Ratio Estimation.” Macromolecular Reaction Engineering 13 4 (2019).
Triisopropylsilyl acrylateSupplier
- Tel
- 0514-85083918 13056321938
- sales@upkind.com
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 4006356688 18621169109
- market03@meryer.com
- Tel
- 18515581800 18501085097
- sales.bj@hwrkchemical.com
- Tel
- 021-54306202 13764082696
- info@hanhongsci.com
Triisopropylsilyl acrylate(157859-20-6)Related Product Information
- Triisopropylsilane
- Triethylsilyl trifluoromethanesulfonate
- Acrylamide
- N-Methylpropionamide
- Triethoxypropylsilane
- 3-Chloropropyltriethoxysilane
- 3-Aminopropyltriethoxysilane
- METHACRYLOXYMETHYLTRIMETHOXYSILANE
- triisopropylsilyl Methacrylate
- Hexamethyldisilazane
- Triisopropylsilyl chloride
- Hexamethyldisiloxane
- ACRYLOXYTRIMETHYLSILANE
- ETHOXYTRIETHYLSILANE
- TRIETHYLSILANOL
- TRIETHYLACETOXYSILANE
- TRIISOPROPYLSILYL ACRYLATE
- DIISOPROPYLETHOXYSILANE