2-bromo-3-methyl-phenol
2-bromo-3-methyl-phenol Basic information
- Product Name:
- 2-bromo-3-methyl-phenol
- Synonyms:
-
- 2-bromo-3-methyl-phenol
- 2-Bromo-3-hydroxytoluene
- Phenol, 2-broMo-3-Methyl-
- 2-Bromo-3-methylphenol 98%
- 2-bromo-3-methyl-phenol USP/EP/BP
- CAS:
- 22061-78-5
- MF:
- C7H7BrO
- MW:
- 187.03
- Product Categories:
-
- Halides
- Phenyls & Phenyl-Het
- Phenyls & Phenyl-Het
- Mol File:
- 22061-78-5.mol
2-bromo-3-methyl-phenol Chemical Properties
- Melting point:
- 58.5-59 °C
- Boiling point:
- 83-84 °C(Press: 4 Torr)
- Density
- 1.554±0.06 g/cm3(Predicted)
- storage temp.
- Inert atmosphere,Room Temperature
- solubility
- Chloroform (Slightly), Ethyl Acetate (Slightly)
- form
- Solid
- pka
- 8.54±0.10(Predicted)
- color
- Light Brown
2-bromo-3-methyl-phenol Usage And Synthesis
Uses
2-Bromo-3-methylphenol is a reagent used in chemoselective and regioselective oxybromination of phenols with dioxygen
Synthesis
2835-97-4
22061-78-5
Step 1: 2-Amino-3-methylphenol (8a, 5.7 g, 46.3 mmol) was dissolved in a solvent mixture of water (30 mL) and 1,4-dioxane (15 mL). The reaction mixture was heated to reflux followed by slow dropwise addition of hydrobromic acid (48%, 17 mL, 0.31 mol) over 20 min. After the dropwise addition was completed, the reaction was continued at reflux for 15 min. The reaction solution was cooled to 0 °C and an aqueous solution of sodium nitrite (20 mL) was added over 30 min. Stirring was continued at 0 °C for 15 min, after which the reaction mixture was poured at once into a mixture of water (20 mL) and hydrobromic acid (48%, 17 mL, 0.31 mol) of cuprous bromide (I) (7.64 g, 53.2 mmol) that had been pre-cooled to 0 °C and treated to avoid light. After stirring at 0 °C for 15 min, the reaction solution was slowly warmed to 60 °C and stirring was continued for 15 min. It was then cooled to room temperature and stirred overnight. Upon completion of the reaction, the mixture was transferred to a partition funnel and extracted with ethyl acetate (3×). The organic phases were combined, washed with saturated brine, dried over anhydrous magnesium sulfate, filtered and concentrated to give the crude product. Purification by CombiFlash fast chromatography system (eluent: 20% ethyl acetate/hexane) gave the target product 2-bromo-3-methylphenol (8b, 1.46 g, 17% yield) as a reddish brown oil.
References
[1] Patent: WO2009/62285, 2009, A1. Location in patent: Page/Page column 60-61
[2] Patent: WO2009/62308, 2009, A1. Location in patent: Page/Page column 70
[3] Patent: WO2009/62288, 2009, A1. Location in patent: Page/Page column 67
[4] Patent: WO2009/62289, 2009, A1. Location in patent: Page/Page column 74
[5] Journal of the Chemical Society, 1925, vol. 127, p. 498
2-bromo-3-methyl-phenolSupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 021-50795510 4000665055
- sales@accelachem.com
- Tel
- 021-54306202 13764082696
- info@hanhongsci.com
- Tel
- 010-59484199 18611897322
- sales@eternalchem.com
- Tel
- 4009903999 13355009207
- 3007715519@qq.com
2-bromo-3-methyl-phenol(22061-78-5)Related Product Information
- 2-BROMO-3-METHYLANILINE 98
- 2,4,6-TRIBROMO-3-METHYLPHENOL
- Methyl Red
- ETHYL 3,5-DIBROMO-2,4-DIHYDROXY-6-METHYLBENZOATE
- METHYL 3,5-DIBROMO-2,4-DIHYDROXY-6-METHYLBENZOATE
- BTB
- Bromocresol green
- 3-HYDROXY-2,4,6-TRIBROMOBENZALDEHYDE
- METHYL 3,5-DIBROMO-2,4-DIMETHOXY-6-METHYLBENZOATE
- Bromoxylenol Blue
- 3-Hydroxy-2,4,6-tribromobenzoic acid
- BROMOCRESOL BLUE SODIUM SALT
- 2-Bromo-3-hydroxybenzaldehyde
- 3-HYDROXY-2,4,6-TRIBROMOBENZYL ALCOHOL
- 2,4,6-TRIBROMO-3,5-DIMETHYLPHENOL
- R(+)-6-BROMO-7,8-DIHYDROXY-3-ALLYL-1-PHENYL-2,3,4,5-TETRAHYDRO-1H-3-BENZAZEPINE HYDROBROMIDE
- TIMTEC-BB SBB006520
- 2,4,6-TRIBROMO-3,5-DIHYDROXYTOLUENE