5-Fluoropyridin-3-ylboronic acid Chemical Properties

Melting point:

233-236

Boiling point:

292.9±50.0 °C(Predicted)

Density 

1.34±0.1 g/cm3(Predicted)

storage temp. 

Keep in dark place,Sealed in dry,Room Temperature

solubility 

Soluble in hot methanol.

form 

Crystalline Powder

pka

5.85±0.10(Predicted)

color 

White to off-white

InChI

InChI=1S/C5H5BFNO2/c7-5-1-4(6(9)10)2-8-3-5/h1-3,9-10H

InChIKey

FVEDGBRHTGXPOK-UHFFFAOYSA-N

SMILES

B(C1=CC(F)=CN=C1)(O)O

Safety Information

Hazard Codes 

Xi

Risk Statements 

37/38-41-36/37/38

Safety Statements 

26-39-37

Hazard Note 

Irritant/Keep Cold

HS Code 

29319090

5-Fluoropyridin-3-ylboronic acid Usage And Synthesis

Chemical Properties

5-Fluoro-3-pyridineboronic acid is an important raw material for Suzuki cross-coupling reaction, which can be used for conjugate addition reaction with carboxylic compounds containing a, β unsaturated bond. In many pharmaceuticals, pesticides, ionic liquids and other molecules contain pyridine structure, using 5-fluoro-3-pyridineboronic acid as raw material, through Suzuki coupling reaction; the pyridine ring can be introduced into the molecule, and the reaction conditions are mild, the yield is high and environmentally friendly.

Uses

suzuki reaction

Uses

5-Fluoropyridine-3-boronic acid is used as pharmaceutical intermediate.

Synthesis

General procedure for the synthesis of 5-fluoro-3-pyridineboronic acid from 3-bromo-5-fluoropyridine: 3-bromo-5-fluoropyridine (25 Kg, 142 moles, 1.0 eq.), THF (222.5 Kg), and isopropyl borate (28 Kg, 149.3 moles, 1.05 eq.) were added to a 700 L cryogenic reactor. The resulting mixture was cooled to -90°C to -80°C with continuous stirring. Subsequently, n-butyllithium (40.2 Kg, 2.5 M, 142 moles, 1.0 eq.) was added dropwise at a rate of 2 Kg/h and it was ensured that the reaction temperature was maintained below -87 °C. After the dropwise addition was completed, the reaction mixture was kept at -88 °C to -83 °C for 2.5 hours. After confirming the completion of the reaction by HPLC analysis, a 9% aqueous hydrochloric acid solution (7.7 Kg) was added to quench the reaction. The mixture was transferred to a 1000 L glass-lined reactor to bring the temperature back to -20°C to -10°C. Next, additional hydrochloric acid solution (122.3 Kg) was added until the pH was adjusted to 1-2, during which time the temperature was maintained at 0-10°C. The mixture was kept under these conditions for 0.5 hours to promote phase separation. After separation of the organic layer, it was washed with saturated brine (38 Kg), stirred for 0.5 h and left for another 0.5 h to achieve phase separation. The aqueous layer was separated and the combined aqueous layers were extracted twice with ethyl acetate (51Kg and 25Kg). After separation of the organic phase, the pH was adjusted to 6 with 30% aqueous sodium hydroxide (27.4 Kg). at this pH, the solid product precipitated. The slurry was filtered by centrifugation and dried in a disk drier at 40-45°C to give 5-fluoro-3-pyridineboronic acid as a white solid (17.5 Kg, yield 87.4%, purity: 98.6% AUC, determined using Method B).

References

[1] Patent: WO2009/61875, 2009, A2. Location in patent: Page/Page column 36-37

5-Fluoropyridin-3-ylboronic acid(872041-86-6)Related Product Information

• Potassium tetrafluoroborate
• Sodium tetrafluoroborate
• Folic acid
• 2-Pyridineboronic acid
• Pyridine-4-boronic acid
• Lead(II) tetrafluoroborate
• Fluoroboric acid
• 3-Pyridylboronic acid
• NITRONIUM TETRAFLUOROBORATE
• Ethyl 2-(Chlorosulfonyl)acetate
• Citric acid
• Ascoric Acid
• 2-CHLORO-3-FLUOROPYRIDINE-5-BORONIC ACID
• 3-BROMO-2-CHLORO-5-FLUOROPYRIDINE
• 2-Fluoro-3-pyridylboronic acid
• 2-Fluoropyridine-4-boronic acid
• 2,6-Difluoropyridine-3-boronic acid
• 2-Fluoropyridine-5-boronic acid