ChemicalBook > CAS DataBase List > NICKEL AND VANADIUM IN RESIDUAL FUEL OIL

NICKEL AND VANADIUM IN RESIDUAL FUEL OIL

Product Name
NICKEL AND VANADIUM IN RESIDUAL FUEL OIL
CAS No.
64742-79-6
Chemical Name
NICKEL AND VANADIUM IN RESIDUAL FUEL OIL
Synonyms
sulfurcontent;SULFUR CONTENE;SULFUR IN GAS OIL;Sulfurcontentlevel;Nitrogencontentlevel;Sulfurcontent500ppmlevel;Sulfur, 1000μg/g (0.10%);Sulfur content 0wt% level;Sulfur content 1wt% level;Sulfur content 2wt% level
CBNumber
CB1239603
Formula Weight
0
MOL File
Mol file
More
Less

NICKEL AND VANADIUM IN RESIDUAL FUEL OIL Property

vapor pressure 
4hPa at 40℃
Flash point:
25° (77°F)
form 
Liquid
color 
Black
Exposure limits
NIOSH: IDLH 1100 ppm; TWA 350 mg/m3; Ceiling 1800 mg/m3
CAS DataBase Reference
64742-79-6
EPA Substance Registry System
Gas oils (petroleum), hydrodesulfurized (64742-79-6)
More
Less

Safety

Hazard Codes 
T
Risk Statements 
45
Safety Statements 
53-45
RIDADR 
1202
HS Code 
3822.00.6000
HazardClass 
3.2
PackingGroup 
III
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Danger
Hazard statements

H227Combustible liquid

H304May be fatal if swallowed and enters airways

H350May cause cancer

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P308+P313IF exposed or concerned: Get medical advice/attention.

P331Do NOT induce vomiting.

P370+P378In case of fire: Use … for extinction.

P403+P235Store in a well-ventilated place. Keep cool.

P405Store locked up.

More
Less

N-Bromosuccinimide Price

TCI Chemical
Product number
S0369
Product name
Reference Material of Sulfur in Residual Fuel Oil Certified by The Japan Petroleum Institute, Sulfur Content 0.1mass% level
Packaging
100mL
Price
$175
Updated
2024/03/01
TCI Chemical
Product number
S0317
Product name
Reference Material of Sulfur in Residual Fuel Oil Certified by The Japan Petroleum Institute, Sulfur Content 4mass% level
Packaging
100mL
Price
$140
Updated
2024/03/01
Alfa Aesar
Product number
041891
Product name
Sulfur in Crude Oil standard solution
Packaging
100mL
Price
$185.65
Updated
2024/03/01
Alfa Aesar
Product number
041890
Product name
Sulfur in Crude Oil standard solution
Packaging
100mL
Price
$185.65
Updated
2024/03/01
Alfa Aesar
Product number
041889
Product name
Sulfur in Crude Oil standard solution
Packaging
100mL
Price
$185.65
Updated
2024/03/01
More
Less

NICKEL AND VANADIUM IN RESIDUAL FUEL OIL Chemical Properties,Usage,Production

Definition

NICKEL AND VANADIUM IN RESIDUAL FUEL OIL is a complex combination of hydrocarbons obtained from a petroleum stock by treating with hydrogen to convert organic sulfur to hydrogen sulfide which is removed. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C13 through C25 and boiling in the range of approximately 230.degree.C to 400.degree.C (446.degree.F to 752.degree.F).

Flammability and Explosibility

Flammable

NICKEL AND VANADIUM IN RESIDUAL FUEL OIL Preparation Products And Raw materials

Raw materials

Preparation Products

2-AMINO-4-ETHYL-5-METHYL-THIOPHENE-3-CARBOXYLIC ACID METHYL ESTER 2-AMINO-6-METHYL-4,5,6,7-TETRAHYDRO-BENZO[B]THIOPHENE-3-CARBOXYLIC ACID ETHYL ESTER 2-AMINO-4,5-DIMETHYL-THIOPHENE-3-CARBONITRILE 2-AMINO-5-PHENYL-3-THIOPHENECARBOXAMIDE 2-AMINO-6-METHYL-4,5,6,7-TETRAHYDRO-1-BENZOTHIOPHENE-3-CARBOXAMIDE 2-AMINO-6-METHYL-4,5,6,7-TETRAHYDROTHIENO[2,3-C]PYRIDINE-3-CARBONITRILE 2-AMINO-5-ETHYL-THIOPHENE-3-CARBOXYLIC ACID METHYL ESTER 2-AMINO-5,6-DIHYDRO-4H-CYCLOPENTA[B]THIOPHENE-3-CARBOXYLIC ACID METHYL ESTER
More
Less

NICKEL AND VANADIUM IN RESIDUAL FUEL OIL Suppliers

China 16 Germany 1 United Kingdom 2 United States 3 Global 22

64742-79-6, NICKEL AND VANADIUM IN RESIDUAL FUEL OILRelated Search:

1,1,3,3-TETRAMETHYLBUTYL ISOCYANIDE Tris(2,4-pentanedionato)chroMiuM(III) METHYL ISOCYANOACETATE TERT-BUTYL ISOCYANIDE TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATO)DYSPROSIUM(III) Ferric acetylacetonate N-BUTYLISOCYANIDE COBALT(II) ACETYLACETONATE Tosylmethyl isocyanide Cupric acetylacetonate DICHLORO(ETHYLENEDIAMINE)PLATINUM(II) 2,4-PENTANEDIONE, SILVER DERIVATIVE TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATO)EUROPIUM(III) Aluminum acetylacetonate Ethyl isocyanoacetate Benzyl isocyanide 2-(2-Aminoethyl)isothiourea dihydrobromide Ethyl 4-chloro-2-methylthio-5-pyrimidinecarboxylate

  • Sulfurcontent500ppmlevel
  • SULFUR CONTENE
  • Sulfur in Crude Oil standard solution, Specpure(R), 50,000μg/g (5.00%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 5000μg/g (0.50%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 1000μg/g (0.10%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 20,000μg/g (2.00%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 10,000μg/g (1.00%)
  • Sulfur in Residual Oil standard solution, Specpure(R), 10,000μg/g (1.00%)
  • Sulfur in Residual Oil standard solution, Specpure(R), 20,000μg/g (2.00%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 40,000μg/g (4.00%)
  • Sulfur in Residual Oil standard solution, Specpure(R), 40,000μg/g (4.00%)
  • Sulfur in Residual Oil standard solution, Specpure(R), 3500μg/g (0.35%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 30,000μg/g (3.00%)
  • Sulfur in Residual Oil standard solution, Specpure(R), 30,000μg/g (3.00%)
  • Sulfur in Residual Oil standard solution, Specpure(R), 7000μg/g (0.70%)
  • Sulfur in Crude Oil standard solution, Specpure(R), 2500μg/g (0.25%)
  • Reference Material of Sulfur in Residual Fuel Oil Certified by The Japan Petroleum Institute, Sulfur Content 0.5mass% level
  • gasoils(petroleum),hydrodesulfurized
  • Reference Material of Sulfur in Residual Fuel Oil Certified by The Japan Petroleum Institute, Sulfur Content 1mass% level
  • Reference Material of Sulfur in Residual Fuel Oil Certified by The Japan Petroleum Institute, Sulfur Content 2mass% level
  • Reference Material of Sulfur in Residual Fuel Oil Certified by The Japan Petroleum Institute, Sulfur Content 0.2mass% level
  • Reference Material of Nitrogen in Residual Fuel Oil Certified by The Japan Petroleum Institute, Nitrogen Content 0.3mass% level
  • Reference Material of Nitrogen in Residual Fuel Oil Certified by The Japan Petroleum Institute, Nitrogen Content 0.5mass% level
  • Reference Material of Nickel and Vanadium in Residual Fuel Oil Certified by The Japan Petroleum Institute, Low Level (Nickel Content 11mass ppm and Vanadium Content 28mass ppm)
  • Reference Material of Nickel and Vanadium in Residual Fuel Oil Certified by The Japan Petroleum Institute, High Level (Nickel Content 22mass ppm and Vanadium Content 52mass ppm)
  • Sulfur in Residual Oil standard solution, 10,000μg/g (1.00%)
  • Sulfur in Residual Oil standard solution, 3500μg/g (0.35%)
  • Sulfur in Crude Oil standard solution, 30,000μg/g (3.00%)
  • Sulfur in Crude Oil standard solution, 40,000μg/g (4.00%)
  • Sulfur in Crude Oil standard solution, 2500μg/g (0.25%)
  • Sulfur in Residual Oil standard solution, 40,000μg/g (4.00%)
  • Sulfur, 1000μg/g (0.10%)
  • Sulfur in Crude Oil standard solution, 20,000μg/g (2.00%)
  • Sulfur in Crude Oil standard solution, 10,000μg/g (1.00%)
  • Sulfur in Residual Oil standard solution, 20,000μg/g (2.00%)
  • Sulfur in Residual Oil standard solution, 7000μg/g (0.70%)
  • Sulfur in Crude Oil standard solution, 50,000μg/g (5.00%)
  • Sulfur in Residual Oil standard solution, 30,000μg/g (3.00%)
  • Sulfur in Crude Oil standard solution, 5000μg/g (0.50%)
  • Gasoils,petroleum,hydrodesulfurized
  • sulfurcontent
  • NICKEL AND VANADIUM IN RESIDUAL FUEL OIL
  • OIL MATRIX SULFUR STANDARD
  • SULFUR IN CRUDE OIL STANDARD SOLUTION
  • SULFUR IN GAS OIL
  • SULFUR IN RESIDUAL FUEL OIL
  • SULFUR IN RESIDUAL OIL STANDARD SOLUTION
  • High level (nickel content 22ppm and vanadium content 52ppm)
  • Low level (nickel content 2.6ppm and vanadium content 8.8ppm)
  • Nitrogen content 0.3wt% level
  • Nitrogen content 0.5wt% level
  • Nitrogencontentlevel
  • Sulfur content 0.1wt% level
  • Sulfur content 0.2wt% level
  • Sulfur content 0.5wt% level
  • Sulfur content 0wt% level
  • Sulfur content 1wt% level
  • Sulfur content 2wt% level