Losartan potassium Property

Melting point:

263-265°C

storage temp. 

Inert atmosphere,Room Temperature

solubility 

Freely soluble in water and in methanol, slightly soluble in acetonitrile.

form 

powder or crystals

color 

Off-white

Merck 

14,5583

BRN 

5845770

BCS Class

1

Stability:

Stable for 2 years from date of purchase as supplied. Solutions in DMSO may be stored at -20° for up to 2 months.

InChI

InChI=1S/C22H22ClN6O.K/c1-2-3-8-20-24-21(23)19(14-30)29(20)13-15-9-11-16(12-10-15)17-6-4-5-7-18(17)22-25-27-28-26-22;/h4-7,9-12,30H,2-3,8,13-14H2,1H3;/q-1;+1

InChIKey

OXCMYAYHXIHQOA-UHFFFAOYSA-N

SMILES

C1(C=CC=CC=1C1=CC=C(CN2C(CO)=C(Cl)N=C2CCCC)C=C1)C1=NN=NN1[K]

CAS DataBase Reference

124750-99-8(CAS DataBase Reference)

Safety

Hazard Codes 

Xi

Risk Statements 

36/37/38

Safety Statements 

26-36/37/39

WGK Germany 

3

RTECS 

NI6755100

HS Code 

2933290000

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P312Call a POISON CENTER or doctor/physician if you feel unwell.

P403+P233Store in a well-ventilated place. Keep container tightly closed.

Losartan potassium Chemical Properties,Usage,Production

Description

As a angiotensin II receptor antagonist, Losartan Potassium is the potassium salt of losartan with antihypertensive activity, which is mainly used in the therapy of high blood pressure (hypertension) and diabetic nephropathy. It functions by relaxing blood vessels so that blood can flow more easily. It is also effective to help protect the kidneys from damage caused by diabetes and lower the risks of stroke in patients suffering from hypertension and myocardial enlargement. Besides, recent study has suggested that losartan is beneficial to reverse age related dysfunction in maintaining normal blood pressure and cellular energy usage on mitochondria and it can probably be used to treat left ventricular hypertrophy. It may also be used as an alternative agent for the treatment of systolic dysfunction, myocardial infarction, coronary artery disease, and heart failure.

References

https://en.wikipedia.org/wiki/Losartan
https://www.drugbank.ca/drugs/DB00678
https://pubchem.ncbi.nlm.nih.gov/compound/11751549#section=Top
http://www.medicinenet.com/losartan-oral/article.htm

Description

Angiotensin II is a hormone that plays an important role in regulating blood pressure. Elevated levels of angiotensin II are implicated in inducing and maintaining hypertension, and also in the development of atherosclerosis. Both of these effects are mediated by the angiotensin II type 1 (AT₁) receptor. Losartan is an AT₁ receptor antagonist with a K_i value of 5-20 nM. It has an attenuating effect on vein graft atherosclerosis in rabbits and effectively reduces arterial blood pressure in rats. In humans, losartan controls hypertension while protecting renal function.

Description

Losartan potassium is the first potent and selective non-peptide angiotensin II (AT II) AT₁ receptor antagonist introduced to the market as a once-daily oral antihypertensive. It is efficacious and long lasting in controlling blood pressure in spontaneous hypertensive rats, in patients with essential hypertension in addition to those patients with renal impairment. Since losartan functions by competitive antagonism at the level of receptor, which represents the most direct way of selectively inhibiting the renin-angiotensin system (RAS) independent of the source of AT II, its use has been reported to be free of the coughing side effect exhibited by the ACE inhibitors. In contrast to calcium channel blockers, losartan does not appear to cause ankle edema, headache and tachycardia. It is also reported to be in clinical trials for the treatment of heart failure. Other reports indicate that losartan may have potential efficacy as an anxiolytic, an antiglaucoma agent, in addition to in providing protection against stroke and in preventing the myointimal proliferative response of the vascular wall after coronary angioplasty and surgery.

Chemical Properties

White to Off-White Crystalline Powder

Originator

DuPont Merck (U.S.A.)

Uses

A nonpeptide angiotensin II AT1-receptor antagonist. Antihypertensive.

Uses

antihypertensive, AT1 angiotensin II antagonist

Uses

Coronary vasodilator used in the diagnosis of coronary heart disease (adenosine A2A agonist).

Manufacturing Process

2-Butyl-4-chloro-1-(2'-(tetrazol-5-yl)biphenyl-4-ylmethyl)-1H-imidazole-5- methanolpotassium was synthesized in 5 stages.
1. Methyl 4'-methylbiphenyl-2-carboxylate (44.2 mmol), 0.5 N KOH in methanol (133 mmol), and water (50 mL) were mixed and refluxed under nitrogen. After 5 hours, the solvent was removed in vacuo and water (200 mL) and ethyl acetate (200 mL) added. The aqueous layer was acidified with concentrated hydrochloric acid to a pH of 3 and the layers were separated. The aqueous phase was extracted with ethyl acetate, the organic layers collected, dried (MgSO4) and the solvent removed in vacuo to yield 8.71 g of a 4'-methylbiphenyl-2-carboxylic acid, melting point 140.0-145.0°C.
2. 4'-Methylbiphenyl-2-carboxylic acid (41 mmol) and thionyl chloride (411 mmol) were mixed and refluxed for 2 hours. The excess thionyl chloride was removed in vacuo and the residue was taken up in toluene. The toluene was removed by rotary evaporation. The crude acid chloride was then added slowly to cold (0°C) concentrated NH4OH (50 mL) so that the temperature was kept below 15°C. After 15 minutes of stirring, water (100 mL) was added and solids precipitated. These were collected, washed with water and dried under high vacuum over P2O5 to yield 7.45 g of a white solid, melting point 126.0-128.5°C. The above product amide (35 mmol) and thionyl chloride (353 mmol) were mixed and refluxed for 3 hours. The thionyl chloride was removed using the same procedure as described above. The residue was washed with a little hexane to yield 6.64 g of 4'-methyl-2-cyanobiphenyl, melting point 44.0- 47.0°C.
3. 4'-Methyl-2-cyanobiphenyl (5.59 g) was brominated using benzoyl peroxide as an initiator. The product was recrystallized from ether to yield 4.7 g of 4'- bromomethyl-2-cyanobiphenyl, melting point 114.5-120.0°C.
4. 4'-Bromomethyl-2-cyanobiphenyl (4.6 g) was alkylated onto 2-n-butyl-4- chloro-5-(hydroxymethyl)-imidazole. For separation of the product was used a flash chromatography in 1:1 hexane/ethyl acetate over silica gel. The regioisomeric products yielded 2.53 g of the faster eluting isomer. Recrystallization from acetonitrile yielded 1.57 g of analytically pure 2-n-butyl4-chloro-1-[2'-cyanobiphenyl-4-yl)methyl]-5-(hydroxymethyl)-imidazole, melting point 153.5 -155.5°C.
5. 2-n-Butyl-4-chloro-1-[(2'-cyanobiphenyl-4-yl)-methyl]-5-(hydroxymethyl)- imidazole (10 mmole), sodium azide (10 mmol), and ammonium chloride (30 mmol) were mixed in DMF (150 mL) under N2 at 100°C for 2 days, after which the temperature was raised to 120°C for 6 days. The reaction was cooled and 3 more equivalents each of ammonium chloride and sodium azide were added. The reaction was again heated for 5 days at 120°C. The reaction was cooled, the inorganic salts filtered, and the filtrate solvent removed in vacuo. Water (200 mL) and ethyl acetate (200 mL) were added to the residue and the layers were separated. The aqueous layer was extracted with ethyl acetate, the organic layers were collected, dried (MgSO4) and the solvent removed in vacuo, to yield a dark yellow oil. The product was purified by flash chromatography in 100% ethyl acetate to 100% ethanol over silica gel to yield 5.60 g of a light yellow 2-n-butyl-4-chloro-5-hydroxymethyl-1-[(2'-(1Htetrazol-5-yl)biphenyl-4-yl)methyl]imidazole. Recrystallization from acetonitrile yielded 4.36 g of light yellow crystals which still melted broadly. The crystals were taken up in 100 mL of hot acetonitrile. The solid that did not dissolve was filtered off to yield 1.04 g of product as a light yellow solid, melting point of 2-n-butyl-4-chloro-5-hydroxymethyl-1-[(2'-(1H-tetrazol-5-yl)biphenyl-4- yl)methyl]imidazole 183.5-184.5°C.
2-n-Butyl-4-chloro-5-hydroxymethyl-1-[(2'-(1H-tetrazol-5-yl)biphenyl-4- yl)methyl]imidazole may be converted to potassium salt.

brand name

Cozaar (Merck).

Therapeutic Function

Antihypertensive

Biological Activity

Selective non-peptide angiotensin AT 1 receptor antagonist. Inhibits the contractile effects of angiotensin II on rabbit aorta and jugular vein (pA 2 = 8.27). Orally active antihypertensive agent.

storage

RT (desiccate)

References

1) Merck 14:5583 2) Chiu et al. (1990), Nonpeptide angiotensin II receptor antagonists. VII. Cellular and biochemical pharmacology of DuP 753, an orally active antihypertensive agent; J. Pharmacol. Exp. Ther., 252 711 3) McIntyre et al. (1997), Losartan, an orally active angiotensin (AT1) receptor antagonist: a review of it’s efficacy and safety in essential hypertension; Pharmacol. Ther., 74 181 4) Diop-Frimpong et al. (2011), Losartan inhibits collagen I synthesis and improves the distribution and efficacy of nanotherapeutics in tumors; Proc. Natl. Acad. Sci. USA, 108 2909 5) Pantazi et al. (2015), Losartan activates sirtuin 1 in rat reduced-size orthotopic liver transplantation; World J. Gastroenterol., 21 8021 6) Kumar et al. (2015), Neuroprotective mechanism of losartan and its interaction with nimesulide against chronic fatigue stress; Inflammopharmacology, 23 291 7) Miguel-Carrasco et al. (2017), Mechanisms underlying the cardiac antifibrotic effects of losartan metabolites; Sci. Rep. 7 41865