ETHYL METHYL ETHER Property

Melting point:

-113.15°C

Boiling point:

bp 10.8°

Density 

d00 0.725

refractive index 

1.3441

Merck 

3828

CAS DataBase Reference

540-67-0

EPA Substance Registry System

Ethane, methoxy- (540-67-0)

Safety

Hazard Codes 

F+

Risk Statements 

12

Safety Statements 

16-29-33-9

RIDADR 

1039

RTECS 

KO0260000

HazardClass 

2.1

Hazardous Substances Data

540-67-0(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H220Extremely flammable gas

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P377Leaking gas fire: Do not extinguish, unless leak can be stopped safely.

P381Eliminate all ignition sources if safe to do so.

P403Store in a well-ventilated place.

ETHYL METHYL ETHER Chemical Properties,Usage,Production

Description

Ethyl methyl ether (methoxyethane, IUPAC) is a colorless liquid that is soluble in water. Specific gravity is 0.70, which is lighter than water. It is highly flammable, with a flammable range of 2%–10.1% in air. Boiling point is 51°F (10°C), flash point is ?35°F (?37°C), and ignition temperature is 374°F (190°C). Vapor density is 2.07, which is heavier than air. In addition to flammability, ethyl methyl ether is an anesthetic and can form explosive peroxides as it ages. The four-digit UN identification number is 1039. The NFPA 704 designation is health 1, flammability 4, and reactivity 1. The primary use is in medicine as an anesthetic.

Chemical Properties

Colorless liquid. Soluble in water; miscible with alcohol and ether.

Chemical Properties

Methyl ethyl ether is a colorless liquid or gas at room temperature.

Uses

Medicine (anesthetic).

Definition

ChEBI: An ether that is the methyl ether derivative of ethanol.

General Description

A clear colorless gas with a medicine-like odor. Flash point -35°F. Boiling point 52°F. Less dense than water. Vapors are heavier than air. Under prolonged exposure to fire or heat the containers may rupture violently and rocket.

Air & Water Reactions

Highly flammable. Soluble in water. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154, 164]. A mixture of liquid air and diethyl ether exploded spontaneously, [MCA Case History 616(1960)].

Reactivity Profile

Ethers, such as ETHYL METHYL ETHER, can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.

Hazard

Highly flammable, dangerous fire and explosion risk.

Health Hazard

Vapors may cause dizziness or asphyxiation without warning. Some may be irritating if inhaled at high concentrations. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire may produce irritating and/or toxic gases.

Fire Hazard

EXTREMELY FLAMMABLE. Will be easily ignited by heat, sparks or flames. Will form explosive mixtures with air. Vapors from liquefied gas are initially heavier than air and spread along ground. CAUTION: Hydrogen (UN1049), Deuterium (UN1957), Hydrogen, refrigerated liquid (UN1966) and Methane (UN1971) are lighter than air and will rise. Hydrogen and Deuterium fires are difficult to detect since they burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.) Vapors may travel to source of ignition and flash back. Cylinders exposed to fire may vent and release flammable gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket.

Safety Profile

Has anesthetic properties. A very dangerous fire and moderate explosion hazard when exposed to heat or flame; can react vigorously with oxidizing materials (e.g., air, O2). To fight fire, use alcohol foam, CO2, dry chemical. See also ETHERS.

Potential Exposure

Used as a medicine and anesthetic.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.

storage

Color Code—Red Stripe: Flammability Hazard:Store separately from all other flammable materials. Prior toworking with methyl ethyl ether you should be trained on itsproper handling and storage. Before entering confined spacewhere this chemical may be present, check to make sure thatan explosive concentration does not exist. Store in tightlyclosed containers in a cool, well-ventilated area away fromoxidizers, strong acids. Where possible, automatically pumpliquid from drums or other storage containers to processcontainers. Drums must be equipped with self-closingvalves, pressure vacuum bungs, and flame arresters. Useonly nonsparking tools and equipment, especially whenopening and closing containers of this chemical. Whereverthis chemical is used, handled, manufactured, or stored, useexplosion-proof electrical equipment and fittings.

Shipping

UN1039 Methyl ethyl ether or Ethyl methyl ether, Hazard Class: 2.1; Labels: 2.1-Flammable gas.

Purification Methods

Dry the ether with CaSO4, pass it through an alumina column (to remove peroxides), then fractionally distil it. [Beilstein 1 H 314, 1 I 158, 1 II 311, 1 III 1288, 1 IV 1314.]

Incompatibilities

May form explosive mixture with air. Incompatible, dangerous reaction with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.). Keep away from alkaline materials, strong acids (may be explosive), strong bases. May form explosive peroxides on standing.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.