Diphenyl chlorophosphate Property

Boiling point:

314-316 °C/272 mmHg (lit.)

Density 

1.296 g/mL at 25 °C (lit.)

vapor pressure 

10 mm Hg ( 190 °C)

refractive index 

n20/D 1.55(lit.)

Flash point:

>230 °F

storage temp. 

Inert atmosphere,2-8°C

solubility 

Chloroform (Slightly), DMSO (Slightly)

form 

Liquid

color 

Clear colorless to light yellow

Water Solubility 

MAY DECOMPOSE

Sensitive 

Moisture Sensitive

BRN 

654130

Stability:

Stable under recommended storage conditions., Stable Under Recommended Storage C

CAS DataBase Reference

2524-64-3(CAS DataBase Reference)

NIST Chemistry Reference

Diphenyl chlorophosphate(2524-64-3)

EPA Substance Registry System

Phosphorochloridic acid, diphenyl ester (2524-64-3)

Safety

Hazard Codes 

C

Risk Statements 

34-37

Safety Statements 

26-36/37/39-45-7-24/25-23

RIDADR 

UN 3265 8/PG 2

WGK Germany 

3

TSCA 

Yes

HazardClass 

8

PackingGroup 

III

HS Code 

29209085

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

Precautionary statements

P270Do not eat, drink or smoke when using this product.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Diphenyl chlorophosphate Chemical Properties,Usage,Production

Description

Diphenyl chlorophosphate is a viscous colorless liquid. It can be prepared in situ by the reaction between diphenyl hydrogen phosphonate and carbon tetrachloride. It is used to prepare aromatic polyesters by polycondensation reaction in pyridine and polyesteramide. Diphenyl chlorophosphate is used as a phosphonating agent, such as to prepare phenylphosphonic acid.

Uses

Diphenyl chlorophosphate can be used to synthesize methadone, an opioid used for opioid maintenance therapy and for pain relief. It is used to control seedling grasses in turf. It undergoes anhydrous condensation with ethyl-4-bromo-butyrate and the hydrolysis product in alkaline medium of this condensation reaction is used in the quantitative determination of 3-cyano-3,3-diphenylpropionic acid.

Reference

1. F. Higashi, A. Hoshio, J. Kiyoshige, Preparation of aromatic polyesters by the direct polycondensation reaction with diphenyl chlorophosphate in pyridine, Polymer Chemistry, 1983, vol. 21, pp. 3241-3247
2. F. Higahi, M. Ozawa, A. Mochizuki, Synthesis of soluble aromatic polyesteramides by stepwise copolycondensation of bisphenols and aromatic diamines with diphenyl chlorophosphate in pyridine, 1986, vol. 24, pp.637-643
3. H. R. Allcock, M. A. Hofmann, C. M. Ambler, R. V. Morford, Phenylphosphonic Acid Functionalized Poly[aryloxyphosphazenes], 2002, vol. 35, pp. 3484-3489

Uses

Diphenyl chlorophosphate is used to prepare cyclohexyl-amidophosphoric acid diphenyl ester by reacting with cyclohexylamine. It is also used in the synthesis of alfa-substituted beta-lactams, anhydrides, esters and thioesters. It is also employed in the conversion of aldoximes to nitriles. Further, it is used in the preparation and reaction of enol phosphates, guanosine-adenosine-5',5'-triphosphate, guanosine-cytidine-5',5'-triphosphate, guanosine-uridine-5',5'-triphosphate, diguanosine-5',5'-diphosphate and diguanosine-5',5'-triphosphate. In addition to this, it serves as a phosphorylating agent for the preparation of 2-deoxy-D-galactose-3 and -6 phosphoric acids.

Uses

Diphenyl chlorophosphate may be used:

• in the preparation of guanosine-adenosine-5′,5′-triphosphate, guanosine-cytidine-5′,5′-triphosphate, guanosine-uridine-5′,5′-triphosphate, diguanosine-5′,5′-diphosphate and diguanosine-5′,5′-triphosphate
• as phosphorylating agent for the synthesis of 2-deoxy-D-galactose-3 and -6 phosphoric acids
• in the synthesis of diaryl phosphoryl derivatives of alkylene dithiophosphates

Preparation

The preparation of Diphenyl chlorophosphate is as follows:With a thermometer,Reflux condenser and mechanical agitation120 g of dichloromethane was placed in a 500 ml four-neck reaction flask.7.3 g of N,N-dimethylformamide,Stirring temperature control below 10 °C,Put 28g of bis(trichloromethyl) carbonate,A solution of 50 g of diphenyl phosphate and 120 g of dichloromethane was added.After the addition, the reaction was carried out for 3 hours. After the end of the reaction, the temperature was controlled below 10 ° C, 20 g of water was slowly added, and the mixture was stirred and the organic phase was dried over anhydrous sodium sulfate. The desiccant was removed by filtration, and the filtrate was evaporated under normal pressure. The temperature was lowered to 0 ° C, and the insoluble matter was removed by filtration to obtain 48.9 g of diphenyl chlorophosphate. The purity of GC was 99.2%, and the yield was 90.3%.

General Description

A clear colorless to light yellow liquid with a pungent odor. Insoluble in water and denser than water. Hence sinks in water. Contact may severely irritate skin, eyes and mucous membranes. Flash point above 235°F.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

Diphenyl chlorophosphate is incompatible with bases (including amines) strong oxidizing agents, and alcohols. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291]. May form highly toxic and flammable phosphine gas in the presence of strong reducing agents such as hydrides. Partial oxidation by oxidizing agents may result in the release of toxic phosphorus oxides.

Health Hazard

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.

Purification Methods

Fractionally distil it in 30 351.5490. a good vacuum; better use a spinning band column. [Walsh J Am Chem Soc 81 3023 1959, IR: Bellamy & Beecher J Chem Soc 475 1952, Beilstein 6 IV 737.]