Sodium dichloroisocyanurate Property

Melting point:

225°C

Density 

1 g/cm3

vapor pressure 

0.006Pa at 20℃

storage temp. 

0-6°C

solubility 

DMSO (Slightly, Heated), Methanol (Slightly, Heated, Sonicated), Water

form 

powder to lump

color 

White to Almost white

Water Solubility 

30g/100ml (25 ºC)

Sensitive 

Moisture Sensitive

BRN 

4056155

Stability:

Stable. Oxidizing agent - contact with combustible material may lead to fire. Incompatible with strong bases, strong oxidizing agents. Reacts readily with many nitrogen-containing compounds to form explosive nitrogen triiodide. Moisture-sensitive.

InChI

InChI=1S/C3HCl2N3O3.Na/c4-7-1(9)6-2(10)8(5)3(7)11;/h(H,6,9,10);/q;+1/p-1

InChIKey

MSFGZHUJTJBYFA-UHFFFAOYSA-M

SMILES

C1(=O)N(Cl)C(=NC(=O)N1Cl)[O-].[Na+]

EPA Substance Registry System

Sodium dichloro-s-triazinetrione (2893-78-9)

Safety

Hazard Codes 

O,Xn,N,E

Risk Statements 

8-22-31-36/37-50/53-2

Safety Statements 

8-26-41-60-61-45

RIDADR 

UN 2465 5.1/PG 2

WGK Germany 

2

RTECS 

XZ1900000

TSCA 

Yes

HazardClass 

5.1

PackingGroup 

II

HS Code 

29336929

Hazardous Substances Data

2893-78-9(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H272May intensify fire; oxidizer

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

H335May cause respiratory irritation

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Sodium dichloroisocyanurate Chemical Properties,Usage,Production

Description

Sodium dichloroisocyanurate(NaDCC) is the sodium salt of a chlorinated hydroxytriazine and is used as a source of free available chlorine, in the form of hypochlorous acid, for the disinfection of water. It is widely used as a stable source of chlorine for the disinfection of swimming pools and in the food industry. It is also used as a means of disinfecting drinking-water, primarily in emergencies, when it provides an easy-to-use source of free chlorine, and, more recently, as the form of chlorine for household point-of-use water treatment.

Physicochemical properties

Sodium dichloroisocyanurate is white crystalline powder and has a strong smell of chlorine gas, containing available chlorine 60% to 64.5%. It has a stable property, and when stored in high temperature and humid areas, the reduction of available chlorine is only about 1%. It is easily dissolved in water and the solubility is 25%(25℃). The solution is weak acid and PH in 1% of the aqueous solution is 5.8 to 6.0. PH has little change while the concentration of the solution increased. When dissolved in water, sodium dichloroisocyanurate will generate hypochlorous, of which the hydrolysis constant is 1×10-4 higher than that of chloramines-T. The stability of the aqueous solution is poor. Under the ultraviolet light, the loss of the active chlorine would be accelerated. Sodium dichloroisocyanurate solution with low concentration can quickly kill all kinds of vegetative forms of bacteria, fungi and virus ,especially for hepatitis virus. The solution has several characteristics such as with high chlorine content, strong sterilization effect, simple process and low-cost. In addition, sodium dichloroisocyanurate is of low toxicity, and its sterilization effect is better than that of bleaching powder and chloramines-T. Mixing metal reducing agents or acid synergist with potassium permanganate and sodium dichloroisocyanurate powder can produce chlorine smoke fumigant or acid chloride smoke fumigant. Once lighted, such smoke fumigant will give off gas with strong sterilization effect.

Chlorine-containing disinfectants

Sodium dichloroisocyanurate, bleaching powder, dibasic tricalcium hypochlorite and sodium hypochlorite are several chlorine-containing disinfectants which are generally used in China. The disinfection capability of chlorine-containing disinfectant is mainly determined by the content of the available chlorine it contained. The higher the content of available chlorine is, the stronger the ability of disinfection is. When dissolved in water, chlorine-containing disinfectants form hypochlorous which has sterilization effect. Hypochlorous produced by bleaching power or dibasic tricalcium hypochlorite in the solution is associated with the PH of the solution. The lower PH in the solution is, the more hypochlorous it will produce. Due to a higher hydrolysis constant, the sterilization capability of sodium dichloroisocyanurate is stronger than most other chloramine disinfectants. Compared with hypochlorite disinfectants, the sterilization capability of sodium dichloroisocyanurate is weaker in low concentration of solution; while in high concentration of the solution, the solution can keep weak acidity. Therefore, the sterilization effect of sodium dichloroisocyanurate sometimes can be better than that of hypochlorite disinfectants. Chlorine-containing disinfectants mentioned above have good broad-spectrum germicidal efficacy and killing effects on vegetative form of bacteria, virus, fungal spore and bacterial spore.
sodium dichloroisocyanurate is one of the chlorinated isocyanuric acid disinfectants. Congeneric products also include chloroisobromine acid, trichloroisocyanuric acid, dichlord isocyanurice acid, potassium dichloroisocyanurate and so on. This product and other chlorinated isocyanuric acid disinfectants have a wide bactericidal spectrum and strong sterilization effect on vegetative form of bacteria, virus, fungal spore and bacterial spore. They also have strong killing effect on various bacterial(eg. escherichia coli, staphylococcus aureus ), virus(eg. hepatitis virus), bacterial spores(eg. spores of bacillus subtilis var niger) and fungus. In the effective concentration of the solution, this product can kill 99.9% escherichia in 30 minutes, all bacteria spores in five to thirty minutes and all hepatitis virus in five minutes. Besides, this product also have the function to destroy surface antigen of type B hepatitis virus. Sodium dichloroisocyanurate has a better killing effect in the acidic conditions. The lower PH is, the better effect it has. This product has a good stability of chemical property and exists no carcinogenic potential. This product can be used for disinfection in water, processing equipment in food factory, tableware, food, vehicles, animal buildings, magnanerie, fishpond and utensil and so on.
The above information is edited by the Chemicalbook Bai Linlin.

Uses

Sodium dichloroisocyanurate, the sodium salt of a chlorinated hydroxytriazine, is used as a source of free available chlorine (in the form of hypochlorous acid, HOCl) for disinfecting drinking water.
Sodium dichloroisocyanurate can be manufactured either as the anhydrous salt or as the dihydrate. Anhydrous sodium dichloroisocyanurate contains about 63% free available chlorine. When this compound is added to water, it is rapidly hydrolyzed to release free available chlorine, establishing a complex series of equilibria involving six chlorinated and four non-chlorinated isocyanurates. As free available chlorine is consumed on reacting with organic material in the water, chloroisocyanurates rapidly dissociate and continue to release free chlorine.
The use of sodium dichloroisocyanurate as a source of freely available chlorine is not expected to lead to greater production of by-products than does the use of elemental chlorine.

Chemical Properties

Dichloroisocyanuric acid, sodium salt, is a white crystalline powder. Chlorine odor. Thermally unstable. It is produced as a result of reaction of cyanuric acid with chlorine. Sodium dichloroisocyanurate is a well established disinfectant used for many purposes including wound cleansing, hospital use, sterilizing babies bottles, disinfection of water for human consumption and disinfection of swimming pools.

Characteristics

Sodium dichloroisocyanurate (NaDCC) is a broad-spectrum disinfectant agent:
More stable than bleach (sodium hypochlorite) - consistent strength produced at point of use for cleaning and disinfecting hard surfaces;
Almost neutral in pH - less corrosive on surfaces than liquid bleach;
Biodegradable – safe for the environment.

Uses

Sodium dichloroisocyanurate can be used as a reagent for N-monochlorination and dehydrochlorination of amino esters. It is also a reagent for chlorination to detect ammonium via formation of colored zebra-bands in a detecting tube.

Uses

Sodium Dichloroisocyanurate (SDIC) widely applied for the sterilization of swimming pool and drinking water, or fighting against infectious diseases, or act as disinfectant in raising silkworm, livestock, poultry and fish. Other applications of SDIC are found in wool shrinkage, textile bleaching, and industrial circulating water cleaning. SDIC is normally supplied in powder and granular, tablets are also available on request. Stabilised chlorine granular (dichlor) are used very widely to chlorinate swimming pool water.

Preparation

Sodium dichloroisocyanurate is produced by chlorination of disodium cyanurate [Na2H(NCO)3] using chlorine (CI2) and neutralization with sodium hydroxide (NaOH).
Disodium cyanurate is obtained by action of sodium hydroxide on isocyanuric acid.

General Description

White solid with an odor of bleach-like odor. Mixes with water.

Air & Water Reactions

Water soluble. May vigorously react with water releasing chlorine gas. Material containing less than 39% available chlorine will undergo reactions as described herein, but may take longer to initiate, and the resulting reaction may not be as vigorous [AAR 1992].

Reactivity Profile

Contact with ammonium compounds or hydrated salts can cause a very vigorous reaction. Prolonged exposure to heat /fire may result in the vigorous decomposition of the material with the rupture of its containers, Sodium dichloroisocyanurate will accelerate the burning of combustible materials [AAR 1991]. Chlorine plus alcohols would yield alkyl hypochlorites. They decompose in the cold and explode on exposure to sunlight or heat. Tertiary hypochlorites are less unstable than secondary or primary hypochlorites [NFPA 491 M 1991].

Hazard

Strong oxidizing material, fire risk near organic materials. Toxic by ingestion.

Health Hazard

Dust causes sneezing and coughing, moderate irritation of the eyes, and itchiness and redness of the skin. Ingestion causes burns of mouth and stomach.

Flammability and Explosibility

Non flammable

Safety Profile

Moderately toxic to humans and animals by ingestion. An experimental teratogen. Experimental reproductive effects. A severe skin and eye irritant. Human systemic effects by ingestion: ulceration or bleeding from stomach. The other main toxic effects were gastrointestinal irritation, salivation, lachrymation, dyspnea, weakness, emaciation, lethargy, diarrhea, coma, and (following very high dosage) death after 1-8 days, with autopsy showing irritation of stomach and gastrointestinal tract, liver dysfunction, and lung congestion. The concentrated material may be a little more toxic, due to greater gastrointestinal irritation. In the dry form, it is not appreciably irritating to dry skin. However, when moist, the concentrated material is irritating to skin, and also may cause severe eye irritation. A powerful oxidizer. Incompatible with combustible materials, ammonium salts, nitrogenous materials. Used to chlorinate swimming pools and in cleaning, bleaching, disinfecting, sanitizing. When heated to decomposition it emits very toxic fumes of Cl-, NOx, and Na2O.

Potential Exposure

Dichloroisocyanuric acid salts, are used in cleaning; making dry bleaches, detergents, sanitizers, and disinfectants; in swimming pool and sewage treatment.

Shipping

UN2465 Dichloroisocyanuric acid, dry or Dichloroisocyanuric acid salts, Hazard Class: 5.1; Labels: 5.1-Oxidizer.

Incompatibilities

A powerful oxidizer. Dust may form explosive mixture with air. Violent reaction with reducing agents; organic matter; easily chlorinated or oxidized materials. Isocyanates are highly flammable and reactive with many compounds, even with themselves. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Reaction with moist air, water or alcohols may form amines and insoluble polyureas and react exothermically, releasing toxic, corrosive or flammable gases, including carbon dioxide; and, at the same time, may generate a violent release of heat increasing the concentration of fumes in the air. Incompatible with amines, aldehydes, alkali metals, ammonia, carboxylic acids, caprolactum, alkaline materials, glycols, ketones, mercaptans, hydrides, organotin catalysts, phenols, strong acids, strong bases, strong reducing agents such as hydrides, urethanes, ureas. Elevated temperatures or contact with acids, bases, tertiary amines, and acyl-chlorides may cause explosive polymerization. Contact with metals may evolve flammable hydrogen gas. Attacks some plastics, rubber and coatings May accumulate static electrical charges, and may cause ignition of its vapors. Incompatible with ammonium salts, amines forming nitrogen trichloride