Manganese triacetate dihydrate Property

Density 

1.59

storage temp. 

Inert atmosphere,Room Temperature

solubility 

DMF (Slightly, Heated, Sonicated), DMSO (Slightly, Heated), Methanol (Slightly),

form 

Solid

color 

Pink

Water Solubility 

decomposes

Sensitive 

Hygroscopic

BRN 

3732626

Exposure limits

OSHA: Ceiling 5 mg/m3
NIOSH: IDLH 500 mg/m3; TWA 1 mg/m3; STEL 3 mg/m3

CAS DataBase Reference

19513-05-4(CAS DataBase Reference)

Safety

Hazard Codes 

Xi,Xn

Risk Statements 

36/37/38-63-62

Safety Statements 

26-36-37/39

RIDADR 

1479

WGK Germany 

3

TSCA 

Yes

HazardClass 

5.1

PackingGroup 

III

HS Code 

29152990

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P405Store locked up.

Manganese triacetate dihydrate Chemical Properties,Usage,Production

Description

Manganese (III) acetate is an inorganic compound that is used as an oxidizing agent in organic synthesis and materials science. Like the analogous acetates of iron and chromium, it is an oxygen-centered coordination complex containing three manganese atoms bridged by acetate units. The anhydrous form of this compound crystallizes as a linear coordination polymer, with an additional acetic acid molecule bridging between manganese atoms on consecutive three-manganese clusters.The chemical is therefore not a simple metal acetate ionic compound nor does the actual structure of it reflect the simple "Mn(OAc)₃" chemical formula that is commonly given. It is usually used as the dihydrate, though the anhydrous form is also used in some situations. The dihydrate is prepared by reacting potassium permanganate and manganese (II) acetate in acetic acid; addition of acetic anhydride to the reaction produces the anhydrous form.
Mangese triacetate has been used as a single electron oxidant. It can oxidize alkenes via addition of acetic acid to form lactones.

Chemical Properties

The cinnamon-brown crystals of a silky luster are immediately decomposed by cold water (hydration).

Uses

Triacetoxymanganese Dihydrate functions as a catalyst for direct acetylation of alcohols with acetic acid.

Uses

Mild and selective oxidizing agent. Catalyzes allylic oxidation of a variety of alkenes in the presence of tert-butylhydroperoxide. Reagent used for radical cyclizations and α-keto-acetoxylation.

Synthesis

In the method of Christensen, the salt is obtained in the following manner: 19.6 g. (80 mmoles) of Mn(CH3COO)3 -2H3O powder is added to 200 ml. of glacial acetic acid at the boiling temperature of the latter, and is stirred until completely dissolved. Then, KMnO4 powder (3.1 g. = 20 mmoles) is gradually added and the mixture heated for a short time with constant agitation. After cooling, 3 ml. of water is added to the darkbrown solution; the mixture is allowed to stand overnight. If the quantity of precipitate is too small, another 3 ml. of water is added and the solution stirred. The formation of crystallization nuclei is promoted by frequent rubbing of the container walls with a glass rod. As a rule, copious crystallization occurs within about one hour. If necessary, the solution is allowed to stand for a few more days (frequent agitation) until the mother liquor is almost colorless. The salt is then filtered off with suction, washed with some glacial acetic acid and recrystallized. The last procedure consists in dissolving 30 g. of salt in 200 ml. of glacial acetic acid (heating), filtering off and working up further in the manner described above. Finally, the salt is dried over CaO.
4 Mn(CH3COO)2 ? 4 H2O + KMnO4 + 8 CH3COOH = 5 Mn(CH3COO)3 ? 2 H2O + CH3COOK + 10 H2O