ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE
ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE Basic information
- Product Name:
- ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE
- Synonyms:
-
- ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE
- ETHYL 2-CHLOROTHIAZOLE-4-CARBOXYLATE
- 2-Chlorothiazole-4-carboxylic acid ethyl ester
- Ethyl 2-chloro-4-thiazolecarboxylate
- 2-Chloro-thiazole-4-carboxylic acid Methyl ester
- 2-chloro-4-Thiazolecarboxylic acid ethyl ester
- 2-Chloro-4-(ethoxycarbonyl)-1,3-thiazole
- 4-Thiazolecarboxylic acid, 2-chloro-, ethyl ester
- CAS:
- 41731-52-6
- MF:
- C6H6ClNO2S
- MW:
- 191.64
- Product Categories:
-
- Building Blocks
- Thiazole
- Mol File:
- 41731-52-6.mol
ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE Chemical Properties
- Boiling point:
- 283.9℃
- Density
- 1.383
- Flash point:
- 125.5℃
- storage temp.
- under inert gas (nitrogen or Argon) at 2-8°C
- pka
- -1.50±0.10(Predicted)
- Appearance
- Light yellow to yellow Solid
- InChI
- InChI=1S/C6H6ClNO2S/c1-2-10-5(9)4-3-11-6(7)8-4/h3H,2H2,1H3
- InChIKey
- GILVNZWYCBUGMT-UHFFFAOYSA-N
- SMILES
- S1C=C(C(OCC)=O)N=C1Cl
ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE Usage And Synthesis
Synthesis
5398-36-7
41731-52-6
General procedure for the synthesis of ethyl 2-chlorothiazole-4-carboxylate from ethyl 2-aminothiazole-4-carboxylate: ethyl 2-aminothiazole-4-carboxylate (306 mg, 1.78 mmol) and cuprous chloride (CuCl, 238 mg, 2.4 mmol) were suspended in concentrated hydrochloric acid (8 mL). The mixture was cooled in a salt/ice bath. A solution of pre-cooled sodium nitrite (NaNO2, 166 mg, 2.4 mmol) in water (2 mL) was added slowly over 10 minutes. The reaction mixture was allowed to gradually warm up to room temperature over 1 h and stirring was continued for 1 h. The reaction mixture was allowed to warm up to room temperature over 1 h and stirring was continued for 1 h. Upon completion of the reaction, water was added to dilute it and the aqueous phase was extracted with ethyl acetate (EtOAc, 3 x 10 mL). The organic phases were combined, washed with saturated brine, dried over anhydrous sodium sulfate (Na2SO4), filtered and concentrated under reduced pressure to give the target product ethyl 2-chlorothiazole-4-carboxylate. Yield: 251 mg, 74% yield; liquid chromatography-mass spectrometry (LC/MS) retention time (tr) 1.06 min; mass spectrometry (electrospray positive ionization mode, ES+) m/z 192, 194 ([M+H]+); 1H NMR (250 MHz, CDCl3) δ 1.41 (t, 3H), 4.43 (q, 2H), 8.08 (s, 1H). 1H).
References
[1] Patent: WO2005/80367, 2005, A1. Location in patent: Page/Page column 109
[2] Organic Letters, 2013, vol. 15, # 20, p. 5390 - 5393
[3] Patent: US2013/178470, 2013, A1. Location in patent: Paragraph 0106
[4] Organic and Biomolecular Chemistry, 2012, vol. 10, # 30, p. 5764 - 5768
[5] Helvetica Chimica Acta, 1944, vol. 27, p. 1432,1433
ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATESupplier
- Tel
- 0519-85519868 18915088878
- sales@ankerbio.com
- Tel
- 0516-0516-88997009 18651776937
- 4164357@qq.com
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 010-010-82967028 13522913783
- 2355560935@qq.com
- Tel
- 001-857-928-2050 or 1-888-588-9418
- sales@chemreagents.com
ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE(41731-52-6)Related Product Information
- 5-Bromopicolinic acid
- Terpinyl acetate
- Oseltamivir phosphate
- 2,5-Dibromo-3-nitropyridine
- 2-PYRIDYLTHIOUREA
- 2-tert-Butyl-1,4-benzoquinone
- 5-Fluorotryptamine hydrochloride
- RARECHEM AL BI 1318
- Ethyl 2-amino-1,3-thiazole-4-carboxylate
- Ethyl 2-bromothiazole-4-carboxylate
- 2-Methyl-1,3-thiazole-4-carboxylic acid
- ETHYL 2-METHYLTHIAZOLE-4-CARBOXYLATE
- 2-PHENYL-1,3-THIAZOLE-4-CARBOXYLIC ACID
- 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLIC ACID
- 2-Chlorothiazole
- METHYL 2-CHLORO-4-THIAZOLECARBOXYLATE
- ETHYL 2-CHLORO-1,3-THIAZOLE-4-CARBOXYLATE
- 2-Chloro-4-formylthiazole