Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Chemical Reagents >  Organic reagents >  Esters >  Methyl ester compound >  Dimethyl 1,3-acetonedicarboxylate

Dimethyl 1,3-acetonedicarboxylate

Basic information Safety Supplier Related

Dimethyl 1,3-acetonedicarboxylate Basic information

Product Name:
Dimethyl 1,3-acetonedicarboxylate
Synonyms:
  • 3-oxo-pentanedioicacidimethylester
  • Dimethyl beta-ketoglutarate
  • Glutaric acid, 3-oxo-, dimethyl ester
  • Pentanedioicacid,3-oxo-,dimethylester
  • DIMETHYL ACETONE-1,3-DICARBOXYLATE
  • DIMETHYL ACETONE DICARBOXYLATE
  • DIMETHYL-BETA-OXOGLUTARATE
  • DIMETHYL 3-OXOGLUTARATE
CAS:
1830-54-2
MF:
C7H10O5
MW:
174.15
EINECS:
217-385-8
Product Categories:
  • API
  • Aromatic Esters
  • straight chain compounds
  • Pharmaceutical Intermediates
  • raw materials
  • bc0001
  • 1830-54-2
Mol File:
1830-54-2.mol
More
Less

Dimethyl 1,3-acetonedicarboxylate Chemical Properties

Melting point:
16-17°C
Boiling point:
237-241 °C/760 mmHg (lit.)
Density 
1.206 g/mL at 20 °C (lit.)
refractive index 
n20/D 1.444(lit.)
Flash point:
>230 °F
storage temp. 
2-8°C
solubility 
Chloroform (Sparingly), Ethyl Acetate (Slightly), Methanol (Slightly)
form 
Liquid
pka
9.06±0.50(Predicted)
color 
Clear colorless to light yellow
Water Solubility 
approx. 120 g/L (20 ºC)
BRN 
1366042
CAS DataBase Reference
1830-54-2(CAS DataBase Reference)
NIST Chemistry Reference
Pentanedioic acid, 3-oxo-, dimethyl ester(1830-54-2)
EPA Substance Registry System
Pentanedioic acid, 3-oxo-, dimethyl ester (1830-54-2)
More
Less

Safety Information

Hazard Codes 
Xi
Risk Statements 
43
Safety Statements 
36/37
WGK Germany 
1
Hazard Note 
Irritant
TSCA 
Yes
HS Code 
29183000

MSDS

More
Less

Dimethyl 1,3-acetonedicarboxylate Usage And Synthesis

Chemical Properties

colorless to yellowish

Uses

Dimethyl 1,3-acetonedicarboxylate is used as intermediate for the syntheses of organic chemicals. Product Data Sheet

Uses

Dimethyl-1,3-acetonedicarboxylate is used in the preparation of optically active lycorane. It has also been substituted into bispidone derivatives for their use as ligands in PET imaging.

Definition

ChEBI: 4(R),8-dimethyl-trans-2-nonenoyl-CoA is an oxo carboxylic acid.

Synthesis

67-56-1

77-92-9

1830-54-2

100009-70-9

20820-77-3

1587-20-8

105-45-3

1. 490 kg (370 L) of anhydrous dichloromethane and 1320 kg (753 L) of chlorosulfonic acid were added to a reactor, ensuring that the ratio of dichloromethane to chlorosulfonic acid was 0.5:1 by volume. 2. The temperature of the mixture was adjusted to 10-15 °C and 665.0 kg of citric acid monohydrate was added at a rate of 1.25 kg/min, maintaining the reaction temperature between 10-15 °C. 3. after the addition is complete, continue to stir the reaction mixture at 10-15 °C until no gas is released (at least 6 hours). 4. Cool the reaction mixture to 3-5°C and slowly add 640 kg (800 L) of anhydrous methanol, controlling the internal temperature to no more than 25°C. 5. Warm the reaction mixture to 30-35 °C and stir for 2 hours to complete the esterification reaction. 6. Cool the reaction mixture to 10-12 °C. Slowly add 1300 L of water, controlling the temperature to no more than 15 °C. 7. 800 mL of dichloromethane was added, stirred for 15 minutes and then allowed to stand for 30 minutes to separate the organic phase. 8. The aqueous phase was extracted three times with 400 mL of dichloromethane and the organic phases were combined. 9. The organic phase was washed sequentially with 1000 L of water and 75 kg of sodium bicarbonate in 1000 L of aqueous solution, adjusting the pH to about 7. 10. The organic phase was separated, washed twice with 750 mL of water and evaporated under vacuum. Evaporation conditions: 3-5 kPa, internal temperature not exceeding 75°C. 11. 535 kg of dimethyl 3-oxoglutarate was obtained and used in subsequent reactions without further purification. 12. Gas chromatography analysis conditions: HP-6850 gas chromatograph, HP-1.25 m x 0.32 mm column, film thickness 0.17 μm, carrier gas is hydrogen, programmed temperature increase: 80 ℃ held for 5 minutes, 10 ℃/min to 200 ℃ and held for 8 minutes, detector FID 280 ℃, injector 200 ℃. 13. Expected retention times: 1.18 min for methyl acetoacetate, 5.77 min for dimethyl 3-oxoglutarate, 8.15 min for enol ethers, 10.00 min for trimethyl aconite, 10.42 min for trimethyl citrate, 18.76 min for isosorbic acid derivatives. 14. Area normalization results: methyl acetoacetate 0.31%, dimethyl 3-oxoglutarate 98.33%, enol ether 0.81%, trimethylaconate 0.28%, trimethyl citrate 0.19%, isosorbic acid derivatives not detected, and other contaminants (>0.2%) not detected.

References

[1] Patent: WO2004/89867, 2004, A2. Location in patent: Page 20-26

Dimethyl 1,3-acetonedicarboxylateSupplier

Shanghai Mingyi Pharmaceutical Chemical Co., Ltd. Gold
Tel
021-51200341 18717810934
Email
2481589623@qq.com
Shanghai RC Chemicals Co., Ltd. Gold
Tel
21-58661250 18217085189
Email
3059772675@qq.com
Shanxi jiaernuo Biotechnology Co.,LTD. Gold
Tel
0913-2034526; 13992350171
Email
540492555@qq.com
Jiangxi Jingyang Chemical Products Co., LTD Gold
Tel
0798-15170312128 15170312128
Email
1436027029@qq.com
Shanghai Boyle Chemical Co., Ltd.
Tel
021-50182298 021-50180596
Email
sales@boylechem.com