Pinitol oil Property

Melting point:

−55 °C(lit.)

Boiling point:

153-175 °C(lit.)

Density 

0.86 g/mL at 25 °C(lit.)

vapor density 

4.84 (−7 °C, vs air)

vapor pressure 

4 mm Hg ( −6.7 °C)

refractive index 

n20/D 1.515

Flash point:

86 °F

Odor

at 100.00 %. pine

Odor Type

pine

CAS DataBase Reference

8002-09-3(CAS DataBase Reference)

EPA Substance Registry System

Pine oil (8002-09-3)

Safety

Hazard Codes 

Xn,N

Risk Statements 

36/38-43-65

Safety Statements 

36/37-46-61-62

RIDADR 

UN 1299 3/PG 3

WGK Germany 

2

RTECS 

YO8400000

HazardClass 

3.2

PackingGroup 

III

HS Code 

38051000

Hazardous Substances Data

8002-09-3(Hazardous Substances Data)

Toxicity

LD50 oral in rat: 3200mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H226Flammable liquid and vapour

H304May be fatal if swallowed and enters airways

H315Causes skin irritation

H317May cause an allergic skin reaction

H318Causes serious eye damage

H341Suspected of causing genetic defects

H351Suspected of causing cancer

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P272Contaminated work clothing should not be allowed out of the workplace.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P281Use personal protective equipment as required.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P308+P313IF exposed or concerned: Get medical advice/attention.

P310Immediately call a POISON CENTER or doctor/physician.

P321Specific treatment (see … on this label).

P332+P313IF SKIN irritation occurs: Get medical advice/attention.

P333+P313IF SKIN irritation or rash occurs: Get medical advice/attention.

P362Take off contaminated clothing and wash before reuse.

P363Wash contaminated clothing before reuse.

P391Collect spillage. Hazardous to the aquatic environment

P405Store locked up.

P501Dispose of contents/container to..…

Pinitol oil Chemical Properties,Usage,Production

Chemical Properties

The production of essential oil from this pine has been abandoned. The needles are probably distilled with those from spruce. A large addition of white pine needles to spruce needles tends to lower considerably the ester content of the distilled spruce oil.

Uses

pine oil (Pinus palustris) is originally used as a solvent and a disinfectant, it is also deodorizing, anti-bacterial and anti-septic. Studies are now showing that certain fractions of pine oil may stimulate fibroblast growth, which would mean an increase in the turnover of epidermal cells. Pine oil is produced by distillation of small pine branches. It may be irritating to the skin and mucous membranes.

Definition

Extractives and their physically modified derivatives. A complex combination of terpenes produced by the high temperature distillation of oil of turpentine residues or by the catalytic hydration of pinenes. Composed primarily of isomeric tertiary and secondary cyclic terpene alcohols. May contain terpene hydrocarbons and ethers. Exact composition varies with production methods and turpentine source.

General Description

A clear colorless to light amber colored liquid. Contains mainly tertiary and secondary terpene alcohols Produced from the wood of pine trees by extraction or steam distillation. Flash point below 141°F. Less dense than water and insoluble in water. Hence floats on water. Vapors are heavier than air.

Air & Water Reactions

Flammable. Insoluble in water.

Reactivity Profile

Pine oil has a high content of various alcohols. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert them to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides.

Health Hazard

Vapors can cause headache, confusion, respiratory distress. Liquid irritates skin. If ingested, can irritate the entire digestive system and may injure kidneys. If liquid is taken into lungs, causes severe pneumonitis,pulmonary edema/hemorrhage.

Fire Hazard

Behavior in Fire: Forms heavy black smoke and soot.

Safety Profile

Moderately toxic by ingestion. Mddly toxic by skin contact. A weak allergen and a severe irritant to skin and mucous membranes. Human systemic effects by ingestion: excitement, ataxia, headache. A flammable liquid when exposed to heat or flame; can react with oxidizing materials. Moderate spontaneous heating. To fight fire, use foam, CO2, dry chemical. Used as an odorant, dtsinfectant, solvent, wetting agent, and frothing agent.