Trifluoromethanesulfonic anhydride Property

Melting point:

-80°C

Boiling point:

81-83 °C (lit.)

Density 

1.677 g/mL at 25 °C (lit.)

vapor density 

5.2 (vs air)

vapor pressure 

8 mm Hg ( 20 °C)

refractive index 

n20/D 1.321(lit.)

RTECS 

PB2772000

Flash point:

81-83°C

storage temp. 

Store below +30°C.

solubility 

Miscible with dichloromethane. Immiscible with hydrocarbons.

form 

Liquid

Specific Gravity

1.677

color 

Clear colorless to light brown

Water Solubility 

reacts violently with water

Sensitive 

Moisture Sensitive

BRN 

1813600

Stability:

Hygroscopic, Moisture Sensitive

InChIKey

WJKHJLXJJJATHN-UHFFFAOYSA-N

LogP

0.3 at 25℃

CAS DataBase Reference

358-23-6(CAS DataBase Reference)

NIST Chemistry Reference

Trifluoromethanesulfonic anhydride(358-23-6)

EPA Substance Registry System

Methanesulfonic acid, trifluoro-, anhydride (358-23-6)

Safety

Hazard Codes 

C

Risk Statements 

14-21/22-34-35-22-40

Safety Statements 

26-36/37/39-43-45-8

RIDADR 

UN 3265 8/PG 2

WGK Germany 

3

F 

10-21

Hazard Note 

Corrosive

TSCA 

Yes

HazardClass 

8

PackingGroup 

I

HS Code 

29049020

Toxicity

LD50 orally in Rabbit: 1012 mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H272May intensify fire; oxidizer

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

H335May cause respiratory irritation

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P220Keep/Store away from clothing/…/combustible materials.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Trifluoromethanesulfonic anhydride Chemical Properties,Usage,Production

Description

Trifluoromethanesulfonic anhydride, also known as triflic anhydride, has proven to be an extraordinary reagent for a broad range of transformations. As a commercially and readily available reagent, It has been widely used in synthetic chemistry due to its high electrophilicity. Given its high affinity towards O-nucleophiles, reaction with alcohols, carbonyls, sulfur phosphorus- and iodine oxides towards the formation of the corresponding triflates is strongly favored. As one of the premier leaving groups in organic chemistry, the generated triflates then open the door to various downstream transformations, including (but not limited to) substitution reactions, cross-coupling processes, redox reactions, and rearrangements[1-2].

Chemical Properties

clear colorless to light brown liquid

Uses

Trifluoromethanesulfonic Anhydride is a strong electrophile used in chemical synthesis for introducing the triflyl group.

Uses

Trifluoromethanesulfonic anhydride is used to convert phenols and imine into triflic ester and NTf group. It is a strong electrophile used for the introduction of triflyl group in chemical synthesis. It serves as a reagent in the preparation of alkyl and vinyl triflates, and for the stereoselective synthesis of mannosazide methyl uronate donors. It acts as a catalyst for glycosylation with anomeric hydroxy sugars to prepare polysaccharides.

Definition

ChEBI: Triflic anhydride is an organosulfonic anhydride. It is functionally related to a triflic acid.

Reactivity Profile

Electrophilic activation of tertiary and secondary amides with triflic anhydride (Tf2O; rifluoromethanesulfonic anhydride) under mild conditions gives rise to iminium and imino triflates, respectively, which could be utilized as versatile reagents to react with various C-, N-, O- and S-nucleophiles for the transformation of an amide function into different products. Other oxygen-containing nucleophiles, such as sulfoxides and phosphorus oxides, could also undergo nucleophilic attack with Tf2O to generate thionium triflate, electrophilic P-species, and phosphonium triflate. These highly active transient species could readily undergo nucleophilic substitution reactions for further diverse transformations. Furthermore, owing to the strong electrophilic property, Tf2O is prone to react with relatively weak nucleophiles such as nitrile groups or some nitrogen-containing heterocyclic compounds. In addition, Tf2O has also been used as an efficient radical trifluoromethylation and trifluorometh ylthiolation reagent through the release of SO2 or deoxygenation process for the synthesis of trifluoromethylated and trifluoromethylthiolated compounds[2].

Hazard

May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage.

Flammability and Explosibility

Not classified

Synthesis

The synthesis of Trifluoromethanesulfonic anhydride is as follows:
A dry, 100-ml., round-bottomed flask is charged with 36.3 g. (0.242 mole) of trifluoromethanesulfonic acid (Note 1) and 27.3 g. (0.192 mole) of phosphorus pentoxide (Note 2). The flask is stoppered and allowed to stand at room temperature for at least 3 hours. During this period the reaction mixture changes from a slurry to a solid mass. The flask is fitted with a short-path distilling head and heated first with a stream of hot air from a heat gun and then with the flame from a small burner.

The flask is heated until no more trifluoromethanesulfonic anhydride distills, b.p. 82–115°, yielding 28.4–31.2 g. (83–91%) of the anhydride, a colorless liquid. Although this product is sufficiently pure for use in the next step, the remaining acid may be removed from the anhydride by the following procedure. A slurry of 3.2 g. of phosphorus pentoxide in 31.2 g. of the crude anhydride is stirred at room temperature in a stoppered flask for 18 hours. After the reaction flask has been fitted with a short-path distilling head, it is heated with an oil bath, yielding 0.7 g. of forerun, b.p. 74–81°, followed by 27.9 g. of the pure trifluoromethanesulfonic acid anhydride, b.p. 81–84° .

storage

Store in a cool, dry, wellventilated area.  Moisture sensitive.

Purification Methods

It can be freshly prepared from the anhydrous acid (11.5g) and P2O5 (11.5g, or half this weight) by setting aside at room temperature for 1hour, distilling off volatile products then distil it through a short Vigreux column. It is readily hydrolysed by H2O and decomposes appreciably after a few days to liberate SO2 and produce a viscous liquid. Store it dry at low temperatures. [Burdon et al. J Chem Soc 2574 1957, Beard et al. J Org Chem 38 373 1973, Beilstein 3 IV 35.]

References

[1] Haoqi Zhang. “Trifluoromethanesulfonic Anhydride in Amide Activation: A Powerful Tool to Forge Heterocyclic Cores.” TCIMAIL (2021).
[2] Dr. Qixue Qin, Prof. Dr. Ning Jiao, Zengrui Cheng. “Recent Applications of Trifluoromethanesulfonic Anhydride in Organic Synthesis.” Angewandte Chemie 135 10 (2022).