Triethyl orthoformate Property

Melting point:

-76 °C (lit.)

Boiling point:

146 °C (lit.)

Density 

0.891 g/mL at 25 °C (lit.)

vapor density 

5.11 (vs air)

vapor pressure 

2.9 mm Hg ( 20 °C)

refractive index 

n20/D 1.391(lit.)

Flash point:

86 °F

storage temp. 

Flammables area

solubility 

Chloroform (Slightly), Ethyl Acetate (Slightly), Methanol (Slightly)

form 

Liquid

color 

Clear colorless

Water Solubility 

1.35 g/L

Sensitive 

Moisture Sensitive

Merck 

14,6884

BRN 

605384

Stability:

Moisture Sensitive

InChIKey

GKASDNZWUGIAMG-UHFFFAOYSA-N

LogP

1.2 at 20℃

CAS DataBase Reference

122-51-0(CAS DataBase Reference)

NIST Chemistry Reference

Ethyl orthoformate(122-51-0)

EPA Substance Registry System

Ethyl orthoformate (122-51-0)

Safety

Hazard Codes 

Xi

Risk Statements 

10-36-36/38

Safety Statements 

16-26-37/39-36-45-36/39

RIDADR 

UN 2524 3/PG 3

WGK Germany 

1

RTECS 

RM6475000

F 

21

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29159080

Toxicity

LD50 orally in rats: 7.06 g/kg (Smyth)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H226Flammable liquid and vapour

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

Triethyl orthoformate Chemical Properties,Usage,Production

Chemical Properties

Colorless liquid; pungent odor. Highly flammable. Slightly soluble in water; soluble in alcohol, ether; decomposes in water.

Uses

Labelled Prednisolone 21-Sulfate (P703755). Prednisolone 21-Sulfate is a metabolite of Prednisolone (P703740).

Uses

A reagent useful for acetylization and imidic ester formation.

Uses

Triethyl orthoformate is used in Bodroux-Chichibabin aldehyde synthesis to prepare an aldehyde with one carbon higher by reacting with Grignard reagent. It is also used in the electrophilic formylation of activated aromatic species such as phenol.

Application

Sweet, somewhat camphoraceous-herbaceous odor with a Fimecdle-like note. Triethyl orthoformate has been suggested for use in industrial fragrances for masking, etc. and may find some application in that field. It tends to lift the odor of the conventional components of a pine fragrance and increase the radiation, an effect often desirable for masking purposes.

General Description

A clear, colorless liquid with a pungent odor. Less dense than water. Flash point 86°F. Vapors heavier than air. May irritate skin and eyes. Used to make other chemicals.

Reactivity Profile

Triethyl orthoformate is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.

Hazard

Flammable, moderate fire risk.

Health Hazard

May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.

Fire Hazard

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

Flammability and Explosibility

Flammable

Safety Profile

Moderately toxic by ingestion. Mddly toxic by inhalation, skin contact, and subcutaneous routes. A skin and eye irritant. A very dangerous fire hazard when exposed to heat or flame; can react vigorously with oxidzing materials. To fight fire, use foam, CO2, dry chemical. When heated to decomposition it emits acrid smoke and irritating fumes. See also ESTERS.

Purification Methods

Fractionate it first at atmospheric pressure, then in a vacuum. If impure, then shake it with aqueous 2% NaOH, dry it with solid KOH and distil it from sodium through a 20cm Vigreux column (p 11). Alternatively, wash it with H2O, dry it over anhydrous K2CO3, filter and fractionate it through a Widmer column (p 11). [Sah & Ma J Am Chem Soc 54 2964 1932, Ohme & Schmitz Justus Liebigs Ann Chem 716 207 1968, Beilstein 2 IV 25.] IRRITANT and FLAMMABLE.