Sodium iodide Property

Melting point:

661 °C (lit.)

Boiling point:

1300 °C

Density 

3.66

vapor density 

>1 (vs air)

vapor pressure 

1 hPa (767 °C)

refractive index 

1.7745

Flash point:

1300-1304°C

storage temp. 

Store at +5°C to +30°C.

solubility 

water: soluble(lit.)

form 

beads

pka

0.067[at 20 ℃]

color 

White

Specific Gravity

3.67

PH

6-9 (50g/l, H2O, 20℃)

Water Solubility 

184 g/100 mL (25 ºC)

Sensitive 

Hygroscopic

Merck 

14,8631

Exposure limits

ACGIH: TWA 0.01 ppm

Dielectric constant

7.2800000000000002

Stability:

hygroscopic

InChIKey

FVAUCKIRQBBSSJ-UHFFFAOYSA-M

LogP

-1.301 at 25℃

CAS DataBase Reference

7681-82-5(CAS DataBase Reference)

NIST Chemistry Reference

Sodium iodide(7681-82-5)

EPA Substance Registry System

Sodium iodide (7681-82-5)

Safety

Hazard Codes 

Xi,N

Risk Statements 

36/38-36/37/38-50

Safety Statements 

26-61

RIDADR 

UN 3077 9 / PGIII

WGK Germany 

1

RTECS 

WB6475000

F 

8

TSCA 

Yes

HS Code 

28276000

Hazardous Substances Data

7681-82-5(Hazardous Substances Data)

Toxicity

MLD i.v. in rats: 1.3 g/kg, Loeser, Konwiser, J. Lab. Clin. Med. 15, 35 (1929)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

H372Causes damage to organs through prolonged or repeated exposure

H400Very toxic to aquatic life

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P273Avoid release to the environment.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P314Get medical advice/attention if you feel unwell.

Sodium iodide Chemical Properties,Usage,Production

Outline

Sodium iodide is a white solid obtained through the reaction between sodium carbonate with hydroiodic acid and further evaporation of the solution. There are anhydrous, dihydrate and pentahydrate compound. It is the raw material for the manufacturing of iodine, for being used in medicine and photography. The acidic solution of sodium iodide, due to the generation of hydroiodic acid, displays reductive capability.
Anhydrous compound has its chemical formula be NaI and the molecular weight of 149.89. It is colorless cubic crystal or white granular substance with salty taste and slightly bitter. It has a melting point of 651 ℃, boiling point of 1304 ℃, the relative density of 3.665 (4 ℃), 3.607 (25 ℃) and the refractive index of 1.7745. It is easily soluble in water (0 ℃: 159.7,20 ℃: 179.3,25 ℃: 184, 30 ℃: 190, 40 ℃: 205,50 ℃: 227,60 ℃: 257,80 ℃: 296,100 ℃:302) , ethanol (25 ℃:43.3), methanol (10 ℃:65.0,25 ℃: 78.0,40 ℃: 80.7,60 ℃:79,4), acetone (20 ℃:30.0, 80 ℃:21.8), ammonia and pyridine. It is also soluble in glycerol. It has strong hygroscopicity with gradually absorbing moisture in the air to reach the moisture content being 5%. It can turn to brown color due to release of iodine upon oxidation by air. The aqueous solution was slightly alkaline and also has the same change. You can supply a slight amount of alkaline to maintain its stability. The pH of the aqueous solution is 8-9.5. It should be stored sealed and free of light.
Its crystal is dihydrate sodium iodide with the chemical formula being NaI • 2H2O and the molecular weight being 185.92. It is colorless crystal with deliquescence and is easily soluble in water, ethanol and glycerol. It will loss crystal water at temperature above 65 ℃. Its melting point is 752 ℃. It has reduction capability. In air or aqueous solution, it is easily oxidized by oxygen in the air with its iodine being precipitated out and turning black color. It should be stored sealed and free of light.
The transition temperature of pentahydrate, dihydrate and anhydrous is as below: NaI • 5H2O---(-13.5 ℃)---NaI • 2H2O---(65 ℃)---NaI
Sodium iodide can be used as determination agent and measurement of palladium, platinum and thallium, etc through trace analysis measurement. The co-solvent of iodine (sodium iodide can form complex with iodine in an aqueous solution and can increase the iodine solubility), it can also be used as the raw materials of pharmaceuticals, photographic emulsion and single crystal.

Related chemical reaction

Sodium iodide can react with chlorine or bromine, both generating elemental iodine, and can generate sodium halide at the same time.
1. 2NaI + Cl2 = 2NaCl + I2
2. 2NaI + Br2 = 2NaBr + I2
Sodium iodide can react with acid and generate the sodium salt of the corresponding acid as well as generating hydrogen iodide, hydrogen iodide or elemental iodine at the same time.
3. NaI + H3PO4 = NaH2PO4 + HI
4. 2NaI + H3PO4 = NaH2PO4 + 2HI
5. 3NaI + H3PO4 = Na3PO4 + 3HI
6. NaI + H3Sb4 = NaH2SbO4 (white) + HI
7. NaI + H2SO4 (conc.) = NaHSO4 + HI
8. 2NaI + 3H2SO4 (conc.) = 2NaHSO4 + I2 + SO2 + 2H2O
9. NaI + HCl = NaCl + HI
Sodium iodide can react with hypochlorite, generating sodium chloride, sodium hydroxide and elemental iodine.
10. 2NaI + HOCl = NaCl + NaOH + I2
Sodium iodide, upon reaction with the following salts or oxides can generate different sodium salt.
11. NaI + 6Ce (SO4) 2 + 3H2O = NaIO3 + 3Ce2 (SO4) 3 + 3H2SO4
12. 2NaI + 4Ce (SO4) 2 + 2HCl = Na2SO4 + 2Ce2 (SO4) 2 + 2ICl + H2SO4
13. NaI + 3NaIO4 = 4NaIO3
14. 2NaI + 3NaIO4 + 3H2O = NaIO3 + 2Na2H3IO6 + I2
15. 2NaI + 2CO2 + H2O2 = 2NaHCO3 + I2
16. 2NaI + MnO2 + 3H2SO4 = 2NaHSO4 + MnSO4 + I2 + 2H2O

Drug properties and Applications

It can be used for cystography, retrograde urography, cholangiography via T-tube and fistula angiography of other parts.
Urography: 6.25% 100ml. Cystography: 6.25% 150ml. Retrograde pyelography: 12.5% ​​5~7ml. T-tube cholangiography: 12.5% ​​10~30ml. Fistula angiography: determine the injection site and dose according the state of the illness.
This information is edited by Xiongfeng Dai from Chemicalbook.

X-ray contrast agent

The Toxicity is relative large. It can’t subject to intravenous injection. Patients of liver, renal insufficiency and iodine allergies should be hanged. Iodine allergy test should be done before administration.

Precaution and Taboo

X-ray contrast agent is a drug which can take the properties of easily penetrating or not easily penetrating of X-ray as contrast so that the checked part can be developed. The current clinically used contrast agents are divided into two categories including negative contrast agent (its developing density is lower than human soft tissue) and positive contrast agent (developing density is higher than human soft tissue). Negative contrast agents include air, carbon dioxide and oxygen. Positive contrast agents, except barium sulfate, are almost all organic iodide and iodine compounds. Sodium iodide was first used in the urinary system angiography. The iodine-carbon bond of the organic iodine compound is quite stable and is not easily to form iodide with almost no physiological effects on the human body. X-ray contrast agent, after absorption and appropriate concentration in certain organs or tissues, reaching a certain concentration, can absorb X-ray for radiography. They can be divided into two categories including water-soluble and oil-soluble. According to different chemical types, the former can be divided into phthalocyanine, organic acids, sulfonic acids and pyridine ketones; the latter is mainly iodized oil. Ideal contrast agent should have the following requirements: clear developing; non-toxic, no adverse reactions; easily absorbed and excreted; stable physical and chemical properties and can be subject to long-term storage without corrosion; easy to use; easy for manufacturing and inexpensive.

Solubility in water (g / 100ml)

Solubility (grams) per 100 ml of water at different temperatures (℃):
159g/0 ℃; 167g/10 ℃; 178g/20 ℃; 191g/30 ℃; 205g/40 ℃
257g/60 ℃; 295g/80 ℃; 302g/100 ℃

Chemical Properties

It is colorless cubic crystal or white crystalline powder. It is odorless with salty taste bitter. It is easily soluble in water, soluble in methanol, ethanol, acetone, glycerol, liquid ammonia and liquid sulfur dioxide. The aqueous solution was slightly alkaline.

Production method

Eight iron iodide method: based on the mass ratio of iodine method: iron = 3.3: 1, first add the washed iron powder to the reactor; then add water with the mass ratio of the added water amount over iron being 7: 1. Successively add iodine tablet. Owing to the large amount of heating generated during the reaction between iodine and iron, we should use chilled water to cool outside of the reactor to a temperature below 65 ℃. After addition of iodine tablet, the solution turns dark red-brown. When the solution exhibits light green, add the second batch of iodine; after further removal of the iron powder by filtration, add iodine for reaction to generate eight iron iodide. Sodium bicarbonate solution was added to the vessel, add slowly with stirring of eight iron iodide for reaction and there will be carbon dioxide gas released at this time. The reaction solution was allowed to stand; the supernatant was aspirated and concentrated by evaporation to 70~72 ° Bé, filter upon hot, cool and crystallize, centrifuge, separate, and dry to obtain the finished product of sodium iodide.
Fe + I2 → FeI2
3FeI2 + I2 → Fe3I8
Fe3I8 + 8NaHCO3 → 8NaI + Fe3O4 + 4H2O + 8CO2 ↑
Reduction method of iron powder: take 100% to 103% the theoretical amount of caustic soda, add water into 10% solution and heat in the reactor to 60~80 ℃. Add quantitatively of iodine with several times, maintain the temperature of 80~90 ℃ and react upon stirring for about 1h with the reaction liquid being brown and the Ph range of 6 to 7 while there is white crystals of sodium iodide being precipitated out. The reaction solution was cooled to below 30 ℃. Add 2 times the theoretical amount of iron powder to reduce the sodium iodate to sodium iodide. At the beginning, the reaction is relative fierce. When the reaction is eased, heat to boiling and continue the stirring for reaction of 1~2h, then use 10% caustic soda solution for adjustment the Ph to 8; boil for 30min, after cooling, standing for filtration; evaporate and concentrate the colorless filtrate so that the crystal is precipitated out; further filter upon hot, dry to obtain the finished product of sodium iodide.
3I2 + 6NaOH → 5NaI + NaIO3 + 3H2O
NaIO3 + 3Fe + 3H2O → NaI + 3Fe (OH) 2

Chemical Properties

White or almost white, crystalline powder or colourless crystals, hygroscopic.

Chemical Properties

Sodium iodide, white solid, soluble, formed by reaction of sodium carbonate or hydroxide and hydriodic acid, and then evaporating. Used in photography, in medicine and as a source of iodide.

Physical properties

Physical Properties White crystalline deliquescent powder or granules; saline and slight bitter taste; absorbs moisture from air; slowly turns brown on exposure to air due to iodine evolved; density 3.67g/cm³; melts at 660°C; vaporizes at 1,304°C; vapor pressure 1 torr at 767°C and 5 torr at 857°C; very soluble in water, 178.7 g/100 mL at 20°C and 294 g/100 mL at 70°C; soluble in ethanol and acetone.

Uses

Used as iodometric reagent

Uses

Sodium iodide is widely used for halide exchange (Finkelstein reaction), for example in the conversion of an alkyl chloride, allyl chloride and arylmethyl chloride into their respective iodides, which are precursors for pharmaceutical and fine chemical products. They are used to ehnance the efficiency of the formation of Wittig adducts from less reactive chlorides and bromides. Appropriate prepartions find use as a nutrient supplement. Sodium iodide is used as the precursor to the control agent in ab initio emulsion polymerization. Sodium iodide finds use in the determination of dissolved oxygen in the modified Winkler method, synthesis of the fluorescent dye coppersensor-1 (CS1) for imaging labile copper pools in biological samples, and the cleavage of esters, lactones, carbamates and ethers in combination with chlorotrimethylsilane.

Uses

Sodium iodide was used as a component in the preparation of Mayer′s hematoxylin stain solution.
It may be used in the following processes:

• Precursor in the polymerization of butyl acrylate.
• Chaotropic agent in the extraction of DNA.
• Deprotecting agent in the removal of N-tert-butyloxycarbonyl group in amino acids.
• Water-soluble fluorescence quenching reagent.

Definition

ChEBI: A metal iodide salt with a Na(+) counterion.

Preparation

Sodium iodide is prepared by adding hydriodic acid or an acidic iodide solution to a solution of sodium hydroxide or sodium carbonate, followed by evaporation and crystallization: NaOH + HI → NaI + H₂O
The solution is filtered to remove any impurities prior to its evaporation and crystallization.

Definition

sodium iodide: A white crystallinesolid, NaI, very soluble in water andsoluble in both ethanol and ethanoicacid. It is known in both the anhydrousform (cubic; r.d. 3.67; m.p.661°C; b.p. 1304°C) and as the dihydrate(monoclinic; r.d. 2.45). It is preparedby the reaction of hydrogeniodide with sodium carbonate orsodium hydroxide in solution. Likepotassium iodide, sodium iodide inaqueous solution dissolves iodine toform a brown solution containingthe I₃^- ion. It finds applications inphotography and is also used in medicineas an expectorant and in the administrationof radioactive iodine for studies of thyroid function and fortreatment of diseases of the thyroid.

General Description

Sodium iodide is an inorganic salt. Mixture of chlorotrimethylsilane/sodium iodide in acetonitrile is a useful reagent for the cleavage of esters, lactones, carbamates and ethers.

Safety Profile

Moderately toxic by ingestion, intravenous, and intraperitoneal routes. Human teratogenic effects by ingestion: developmental abnormalities of the endocrine system. Human reproductive effects by ingestion: effects on newborn, including postnatal measurements. A skin and eye irritant. Reacts violently with BrF3, HClO4, oxidants. When heated to decomposition it emits toxic fumes of Iand Na2O. See also IODIDES.

Purification Methods

Crystallise NaI from water/ethanol solution and dry it for 12hours under vacuum, at 70o. Alternatively, dissolve it in acetone, filter it and cool it to -20o; the resulting yellow crystals are filtered off and heated in a vacuum oven at 70o for 6hours to remove acetone. The NaI is then crystallised from very dilute NaOH, dried under vacuum, and stored in a vacuum desiccator [Verdin Trans Faraday Soc 57 484 1961].